Tender For Construction Of Additional Classroom At H/S Kharnakling Under Awp&B Samagra Shiksha
Tender Value
39.02 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
78040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional Classroom At H/S Kharnakling Under Awp&B Samagra Shiksha
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundationtrenchesordrains(notexceeding1.5minwidthor10sqmonplan), includingdressingof sidesandrammingofbottoms, liftupto1.5m, including gettingouttheexcavatedsoilanddisposalofsurplusexcavatedsoilasdirected, within a lead of 50 m. All kinds of soil. |
| 2 | Dumping of stome excluding cost of stone on Horizontal on level all complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)(Crushed). Qty. Vide item#2=6.99*0.1/0.15=4.66cum |
| 4 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.(Crushed).Qty. |
| 5 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand). |
| 6 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete. |
| 7 | Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement, masonry up to floor five level including hoisting and setting in position in cement mortar 1:6 using approved quality mud with carriage of material complete |
| 8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for.a). Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | b). Suspended floors, roofs, landings, balconies and access platforms. |
| 13 | c). Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Edges of slabs and breaks in floors and walls Under 20 cm wide. |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). Second class kail wood. qty:ground floor |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood.(35mm). |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately)Second class kail wood9.5.5.1 35 mm thick shutters |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II |
| 19 | 15mm cement plaster on the rough side of single or half brick of mix : 1 : 4 ( 1 cement : 4 coarse sand). |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water cement primer. |
| 21 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick. |
| 22 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge,complete with; budloo wood |
| 23 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 24 | Providing and fixing bright finished brass tower bolts(barrel type)with necessary screws etc complete.A).250x10mm |
| 25 | b).100x10mm |
| 26 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :a). 40 mm |
| 27 | b).100mm |
| 28 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete.300x16mm |
| 29 | Marble stone flooring with 16mm(average) thick marble stone (sample of marble shall be approved by engineer-in charge) over 20mm (average) thick base of cement mortar 1:4(1cement : 4 coarse sand) laid and jointed with cement slurry including rubbing and polishing complete with: Udaipur green marble. |
| 30 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 31 | Wooden Flooring of parquet(wood block) AC-4 flooring of first class kail wood laid over 25mm thick foam and plastic including fixing with fevicol and planed , leveled smooth and finishing complete including carriage. |
| 32 | Providing and fixing of tiles over Shingtsak including carriage.complete job. |
| 33 | Carriage of material from source to site by M.T. including loading, un-loading, complete job.a).Cement an average lead of 05kms. |
| 34 | b).Sand an average lead of 15kms |
| 35 | c).Stone aggregate an average lead of 15kms |
| 36 | d).Stone an average lead of 15kms |
| 37 | Providing and fixing of Stainless steel Railing on Stairs and Varandah including carriage. complete job. |
| 38 | providing and fixing stainless steel pillar all complete. |
| 39 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 40 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 41 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire |
| 42 | 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire |
| 43 | 2x 10 Sq.mm + 1 x 6 Sq.mm earth wire |
| 44 | 4x 10 Sq.mm + 2 x 6 Sq.mm earth wire |
| 45 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.1x 1.5 sq. mm |
| 46 | 1x2.5sq.mm |
| 47 | Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.5/6 A switch |
| 48 | 3 pin 5/6 A socket outlet |
| 49 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 50 | Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 51 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos, 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required |
| 52 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required. |
| 53 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6way(4+18) double door |
| 54 | 4way (4+12)double door |
| 55 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 6/16 amp. |
| 56 | Supplying and fixing of following rating 240/415 Volt's \\"C\\" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.). |
| 57 | SPN 63 Amp |
| 58 | Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE at Power Cable of following sizes on surface/surface cable tray/0.50 mtr bleow ground level etc. as required including carriage upto site of work 50Sq mm 3.5 Core |
| 59 | Supplying & fixing following luminaries as required LED down lighter round 20 Watt LeD 95-221-XXX-65-G1 of wipro or equivalent |
| 60 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.MCCB FP 200 Amp 36 KA |
| 61 | Change over switch ( onload ) FP 100 Amp |
| 62 | Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia GI pipe heavy duty and 3 meter length, with 40mm x 5mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover. |
| 63 | Supplying and laying 25mm x 5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm) |
| 64 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender