Coal and Mines Boards / Undertakings / PSU Closing in 5 days TDR #58489919

Tender For Lifting And Lowering Of Submersible Pump, Lowering And Providing Submersible Pump, Starter, Cable, Pipe & Drilling And Commissioning Of 02 Nos. Deep Bore Well All Complete With Pump House At Lohandia And Bhorai Under Rajmahal Area.

Issued by Boards / Undertakings / PSU · Godda, Jharkhand
Tender Value
53.31 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
66700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Godda → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Lifting And Lowering Of Submersible Pump, Lowering And Providing Submersible Pump, Starter, Cable, Pipe & Drilling And Commissioning Of 02 Nos. Deep Bore Well All Complete With Pump House At Lohandia And Bhorai Under Rajmahal Area.

BOQ

Name of Work:- Lifting and lowering of submersible pump, lowering and providing submersible pump, Starter, cable, pipe & Drilling and commissioning of 02 Nos. deep bore well all complete with Pump house at Lohandia and Bhorai under Rajmahal Area.
Sl. No. Item Description
1Item Description/ Heading
2Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
3Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level.
4Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 150 metre & upto 210 metre depth below ground level.
5Development of tube well in accordance with IS: 2800 (part I) and IS: 11189 to establish maximum rate of usable water yield with out sand content (beyond premissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method measuring static level & draw down etc. by step draw down method, collecting water sampless & getting tested in approved laboratory, I/C disinfection of tubewell all complete, including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge.
6Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, includin hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200mm norminal size dia.
7Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of: 200mm dia.
8Providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part-I), including necessary bolts & nuts of required size complete. 200mm clamp.
9Supplying of Nylon rope 20 mm dia.
10Supplying G.I pipes 50 mm dia nominal dia including fittings.
11Lowering and commissioning of 7.5 HP Submersible pump in deep borewell with GI/ CPVC/PVC pipe including all accessories etc. complete inlcuding cost of labour but excluding cost of material and fittings (cost of pump, cable, PVC Pipe, Contol panel, hanging arrangement like wire/rope to be paid separately)
12Supplying of 7.5 HP Submersible pump motor set (three phase 415 volt, 12 stage, speed of pump-2880 rpm) with Glass Noryl Polypropin impeller, stainless steel pump shaft, head-110 metre, discharge-2.5 litres per second. Suction casing-cast iron and of approved make as per direction of EIC.
13Supplying of three phase/ 415 volt Starter Control Panel of approved make suitable for 7.5 HP submersible pump consisting of volt metre, ammeter, on/off switch, starter, single phase preventer, overload protection, water level guard, dry run protection, under current protection all complete as per direction of EIC.
14Supplying of PVC insulated and PVC sheathed flat submersible cable with copper conductor, 3 core 10 sq.mm as per direction of EIC.
15Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :50 mm nominal bore
16Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore
17Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil.
18Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directed and consolidating the same by through saturation with water, ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
19Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
20Brick work with clamped burnt bricks in superstruture plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
21Brick work with clamped burnt bricks in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand)
22Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
23Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars
24Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
25Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform
2612 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)
276 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
2812 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)
29Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime
30Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece
31Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
32Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58489919
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 53.31 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Eastern Coal Fields Ltd
Work Description Tender for Lifting And Lowering Of Submersible Pump, Lowering And Providing Submersible Pump, Starter, Cable, Pipe & Drilling And Commissioning Of 02 Nos. Deep Bore Well All Complete With Pump House At Lohandia And Bhorai Under Rajmahal Area.
Basic Detail
Tender No ECL/RJML/AGM/AE(C)/ e-Ten/26-27/228 Dt-11.11.2026
Bidding Type Tender
Location
City Godda
State Jharkhand
Key Dates
Publish Date 11 Nov 2026
Submission Date 27 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 53.31 Lakhs
Tender Fee Ref. Documents
EMD 66700
Exemption Not Available
Document List
b08cce73-b051-4bfe-8cef-36cd63ade62d.html
BOQ_381700.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

b08cce73-b051-4bfe-8cef-36cd63ade62d.html

xls

BOQ_381700.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender