Tender For Construction Of cement concrete Road To Sh-137 To Sherewad Mdr From Ch Km 0.00 To 7.10 (Selected Reaches) In Kundgol Taluka And Savanur-Sherewad Mdr Ch Km 37.18 To 39.78 (Selected Reaches) In Hubli Taluka Of Dharwad District. ( Job No.Crif
Tender Overview
Project Description
Tender for Construction Of cement concrete Road To Sh-137 To Sherewad Mdr From Ch Km 0.00 To 7.10 (Selected Reaches) In Kundgol Taluka And Savanur-Sherewad Mdr Ch Km 37.18 To 39.78 (Selected Reaches) In Hubli Taluka Of Dharwad District. ( Job No.Crif-Knt-2026-27-215)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Nov-2026 | NIT | Other | 11-Dec-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material including all labour, usage charges of all machinery etc., complete. (i) By Mechanical Means using Hydraulic excavatorwith all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 2 | Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, including all labour, usage charges of all machinery etc., complete. with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 3 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for subgrade construction with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 4 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 5 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 6 | Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, .A.Laying Using Grader. with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 7 | Construction of Dry lean Cement Concrete Sub- base over a prepared sub-grade with coarse and fine aggregate as per table 600-1 conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 Kg/Cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing to the required grade, level and alignment, including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc.,with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 8 | Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approved grade cement at 400 kg/Cum, coarse and fine aggregate conforming to IS 383, coarse aggregate as per table 600-3, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, to the required grade, level and alignment,textured with texturing machine, finishing and curing including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc.,with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 9 | Providing and laying 80mm thick factory made precast M -30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 10 | ‘Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 11 | Direction and Place Identification Signs upto 0.9 sqm Size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 12 | Retro-Reflectorised Traffic Signs.Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 13 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 14 | Supplying and Fixing of Molded Shank Raised PavementMarkers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal flection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 15 | Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing (with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 16 | Network Survey Vehicle (NSV) attached with SUV Data collection of Longitudinal profiling (International roughness Index). Transverse profiling (Rut depth) Pavement texture in terms of Mean proffile depth, Road Geometry data, (Cross slope, gradient, curvature), GPS Coordinates (X, Y, Z) viz longitudinal, latitude & altitude, Video Imaging for Road side furnitures / Road assets and Video imaging for pavement surface Distress and reports.Note: (i) Average distance has been considered 300km for mobilisation at working site and same for demobilisation.(ii) Speed of vehicle 40km/hr, has been considered. (iii) The survey speed shall be within 30 to 80 kmph.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 17 | Earth work excavation for foundation structures as per drawing and technical specification, inlcuding setting out, constructionn of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work including all lead, lifts, labour, spreading etc., complete. Up to 3 m.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 18 | Providing & laying Plain / Reinforced Cement Concrete M 15 [1:2:4] in open foundaton using Granite/Basalt/Trap crushed stone aggregate 20 mm nominal size, clean seived approved sand, mechanically mixed in concrete mixer, placed in foundation and compacted by vibrator, curing for 14 days, including cost of all materials, labour, hire charges of machinery, loading, unloading, lead lift, transporting etc., with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 19 | Providing & laying Plain / Reinforced Cement Concrete M 20 [1:1.5:3] in substructure for Abutment / Pier Cap using granite/trap/basalt aggregates using 20mm and downsize and clean sieved approved sand including mixing mechanically in Concrete Mixer laid in layers not exceeding 15cms thick layers, as per Drawing including cost of all materials, formwork, centring, vibrating , compacting, hire charges of machinery, lead, lift, loading, unloading, transporting, stacking, curing, finishing the exposed faces etc., complete including lead for cement.Material Requirement: Cement 347.33 Kg, Sand 0.45 Cum, Metal 0.90 Cum.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 20 | Supplying, Fitting and Placing un-coated TMT Fe-500 grade bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including straightening bar, cutting, bending, hooking binding with approved quality binding wire, after placing in position, tying, lapping and/or welding whereever required incluidng cost of all materials, fabrication charges, all labour, material, usage charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc., complete. with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 23 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender