Tender For Road Safety Work On The Road From Km 12 Of The Rampur-Suar-Bazpur Road To The Sports Complex (Odr).
Tender Value
4 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
2 days left
EMD
40000
Bank guarantee accepted
Document Fee
677
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rampur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work On The Road From Km 12 Of The Rampur-Suar-Bazpur Road To The Sports Complex (Odr).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (TRAFFIC SIGNS - (All complete as per E/I) |
| 2 | Stop Sign on Minor Road at intersection of size 90 cm hight octagonal |
| 3 | T- Junction/ X-Junction Sign Board |
| 4 | Speed Limit Sign Board |
| 5 | Hazard Sign in Front |
| 6 | Double side CHEVRON Sign Board |
| 7 | Direction Board on Minor Road at intersection of size 90 cm hight @0.95 sqm f octagonal |
| 8 | Road Delinator Providing and fixing of Standard Metal Delineator as per IRC 79-2019 consisting of minimum retro reflective unit exposed area of 330 square cm in white color, full cube comer micro prismalic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with della angle (or central angle of curve) lying between 20 degree and 30 degree, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof.). The retro reflective sheeting shall be tested for 3 year outdoor weathering lest in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded which quoting tender. If somehow lender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site engineer. |
| 9 | Repeated Bar Marking/ Traverse BarProviding and applying 5.00 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 10 | Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 11 | Supply and Fixing of moulded shank cats eyes moulded shank raised pavement marker made of polycarbonate moulded body and reflected panels with micro parismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD 4280 type H and complaying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-97 DO III DT 11-06-1997. The height width and length shall not exceed 20 mm 150 mm & with minimum reflective area of 13 sqcm. and the each side, slope to the base shall be 35 degree. Fixing will be without nails but using twin polymer shanks using bitumen adhesive on bitumen road as per manufacturs recommnendation including site clearance etc and complete as per direction by rengineer in charge. Rates are included all tax & GST. (Sollar Studs or yellow cats eyes to way AND Red & white two way cats eyes) (All complete as per E/I) |
| 12 | Provision of Trapezoidal hump/Table Top For Desirable speed ( 40 kmph) ( For VR& ODR) at approved locations to control speed, marked with white strips of road marking paint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender