Tender For Construction Of Govt. U.P. School, Kathiapada At Abhidhianandapur Under Odisso G.P Under Jagatsinghpur Block
Tender Value
68.30 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
68400
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jagatsinghapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Govt. U.P. School, Kathiapada At Abhidhianandapur Under Odisso G.P Under Jagatsinghpur Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in all kinds of soil including dressing and levelling the foundation bed and depositing the excavated materials clear of work site with all leads, lifts, delifts and dewatering & shoring including removing bushes, stumps and any other foreign materials from the working area as well as from the foundation trenches with cost of all labour, T&P, hire and running charges of all machineries, labour cess etc. complete in all respects as per specification and direction of the Engineer-in-Charge. |
| 2 | Filling in foundation & plinth with sand well watered to saturated condition and rammed including all cost, carriage, royalty, taxes of materials with all labour charges cess etc. complete as per the direction of the Engineer-in-Charge. |
| 3 | Cement Concrete (1:3:6) with 40mm size hard granite crusher broken metal confirming to relevant BIS specifications with all cost, conveyance, royalty of all materials T&P, cess including scaffolding, walkways & properly mixing, hoisting & placing concrete to desired workability & curing for recommended period etc. complete as per the direction of the Engineer-in-Charge. |
| 4 | Cement Concrete (1:2:4) with 12mm size downgraded hard granite crusher broken metal confirming to relevant BIS specifications with all cost, conveyance, royalty of all materials T&P, cess including scaffolding, walkways & properly mixing, hoisting & placing concrete to desired workability & curing for recommended period etc. complete as per the direction of the Engineer-in-Charge. |
| 5 | Flyash brick masonry in cement mortar (1:6) in foundation & plinth using Flyash bricks of 25x12x8cm size having a crushing strength of not less than 75 kg./sq.cm with dimensional tolerance ± 2 percent including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 6 | Flyash brick masonry in cement mortar (1:6) in superstructure & plinth using Flyash bricks of 25x12x8cm size having a crushing strength of not less than 75 kg./sq.cm with dimensional tolerance ± 2 percent including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 7 | 1st Floor |
| 8 | Flyash brick masonry in cement mortar (1:4) in superstructure & plinth using Flyash bricks of 25x12x8cm size having a crushing strength of not less than 75 kg./sq.cm with dimensional tolerance ± 2 percent including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 9 | Cement Concrete M-20 with 20mm and downgraded size hard granite crusher broken chips for PCC / RCC work confirming to relevant BIS specifications for all materials including scaffolding, walkways & properly mixing, hoisting & laying with desired workability with all cost, conveyance, royalty of all materials, T&P labour charges, cess etc. complete including curring for recommended period as per the direction of the Engineer-in-Charge. (Column Base & footing) |
| 10 | Plinth beam |
| 11 | Column ,Beam-Ground floor |
| 12 | 1st floor |
| 13 | Lintel-Ground floor |
| 14 | 1st floor |
| 15 | Roof slab -Ground floor |
| 16 | 1st floor |
| 17 | Staircase -Ground floor |
| 18 | 1st floor |
| 19 | Supplying, fitting, fixing of HYSD including labour charges for straightening, cutting, bending and binding the H.Y.S.D. Bar or tor steel and tying the grills and placing in position (confirming to I.S.I specification) including jointing if necessary by lapping, welding as required for R.C.C work as per approved drawing and design & binding with binding wire 18 to 20 gauge including cost carriage and other taxes of all materials with all leads, lifts & delifts of reinforcement bars etc. complete as per the direction of the Engineer-in-charge |
| 20 | 1st Floor |
| 21 | 20mm thick cement plaster in cement mortar (1:4) as grading plaster in roof and slab confirming to BIS specifications with all cost, conveyance, royalty and labour charges, cess including scaffolding and curring for recommended period etc complete as per the direction of the Engineer-in-Charge. |
| 22 | 1st Floor |
| 23 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete as per direction of the Engineer-in-Charge. |
| 24 | 1st Floor |
| 25 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete as per direction of the Engineer-in-Charge. |
| 26 | 1st Floor |
| 27 | Providing 6mm thick cement plastering (1:4) to RCC surfaces finished smooth including closed chipping, cleaning, adding adhesive to slurry treatment etc. all cost, carriage, royalty of materials, labour and all other taxes of materials with watering, curing etc complete as per the direction of the Engineer-in-Charge |
| 28 | 1st Floor |
| 29 | Providing 2.5cm thick A.S.flooring with C.C (1:2:4) using 12mm size hard black broken granite chips of approved quality from approved quarry including watering, curring etc. with cost, conveyance, royalty and taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 30 | 1st Floor |
| 31 | Painting two coats with Weather Seal Coat over a coat of primer of approved shade upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge |
| 32 | 1st Floor |
| 33 | Painting two coats with a coat of approved Plastic Emulsion paint over a coat of primer including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge |
| 34 | 1st Floor |
| 35 | Painting two coats with approved Synthetic enamel paints of approved colour, shade over a coat of primer in Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge. |
| 36 | 1st Floor |
| 37 | Supplying, fitting & fixing in all floors of M.S. Grill in Gate doors and windows with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of labour, materials cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost |
| 38 | 1st Floor |
| 39 | Supplying, Fitting & Fixing GCI Sheet of 0.4mm thick in Roofing including cost, conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge |
| 40 | Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mm X2mm @ 0.90mtr. C/C and stainless square pipes bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance of Materials, Labour, T&P etc. required for the complete in all respect and as per specification & direction of Engineer-in-charge |
| 41 | 1st Floor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender