Tender For Improvement Such As Widening And Strengthening Of Kapsila Road To Tusura-Gudvela Pwd Road Via Dhanghara (Odr) From 0/00 Km To 1/144 Km Il To Dl In The District Of Balangir Under State Plan 2026-27.
Tender Value
1.98 Crore
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
1.99 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balangir → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Such As Widening And Strengthening Of Kapsila Road To Tusura-Gudvela Pwd Road Via Dhanghara (Odr) From 0/00 Km To 1/144 Km Il To Dl In The District Of Balangir Under State Plan 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used. |
| 2 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers. |
| 3 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density. |
| 4 | Construction of granular sub-base by providing Gr.-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller. |
| 5 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers. |
| 6 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.(AR, P-167/43) |
| 7 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical means. |
| 8 | Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared su.(AR, P-169/45) |
| 9 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler....……………… |
| 10 | Providing and laying bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared su.(AR, P-169/45) |
| 11 | Construction of moorum shoulder with approved quarry with all Lead & Lift etc Complete |
| 12 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. |
| 13 | Reinforced cement concrete M15 grade 200m, KM, 5th Km Stone of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding paintinga) 200 m |
| 14 | b) Ordinary Km stone |
| 15 | c) 5th Km stone |
| 16 | Reinforced cement concrete M15 grade 15cm dia and 1.0m long Guard post (Precast) standard design as per IRC:25-1967, fixed in position including finishing but excluding painting |
| 17 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. |
| 18 | Providing and fixing of bi-directional retro reflective raised pavement Markers of approved colour, quality & make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including including cost, conveyance, taxes, cess,royalties of all materials, transportation, duties, sundries, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 19 | Refixing of the old used 15cm dia and 1.0m long of R.C.C. M15 Guard post (Precast) |
| 20 | Providing and errecting direction and place identification retro reflective sign as per IRC 67 made of high intensity grade sheeting as per clause no 801.3 fixed over aluminium sheeting, 2m thick with area exceeding 0.9sqm supported on a mild steel angle Iron post 75x75x6mm , 2nos firmly fixed to the ground by means of properly designed foundation with M15 grade of concrete 45x45x60cm below ground level as per approved drawing.(a) Facility Information signs (800x600 mm) |
| 21 | (i) Directioal/Place indication sign (1200x700 mm)(up to 0.90 sqm) |
| 22 | (ii) Route marker signs (450x600 mm) |
| 23 | (b) Cautionary signs triangular 900mm side. |
| 24 | (c) Circular 600 mm dia. |
| 25 | (ii) 90 cm high octagon |
| 26 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with .... |
| 27 | Filling sand of approved quality as per approved drawing and direction of the Engineer-in-charge including cost, conveyance, royality taxes of all materials conforming to the MORTH techanical specification. |
| 28 | Cement concrete M-15 grade in foundation and wall as per approved drawing and direction of the Engineer-in-charge including cost, conveyance, royality taxes of all materials conforming to the MORTH techanical specification. |
| 29 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications . |
| 30 | Filling Foundation & plinth with excavated earth in all kinds of soil with all labour, lifts and lead of 1000 metres etc complete. |
| 31 | Providing M15 grade Plain Cement Concrete in Sub-structure, wall etc complete as per Drawing and Technical Specifications. |
| 32 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face Complete as per drawing and Technical specification. |
| 33 | Painting 2 coats on new concrete surface (By synthetic enamel paint Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender