Housing Urban and Rular Development Government Departments Closing in 10 days TDR #58489301

Tender For Construction Of New Ps Building At Raghunathpalli Ps (Urban Ps), Raurkela.

Issued by Government Departments · Khordha, Odisha
Tender Value
3.33 Crore
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
3.33 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of New Ps Building At Raghunathpalli Ps (Urban Ps), Raurkela.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 16-Nov-2026 CHANGE IN DTCN CLAUSES Technical Bid 01-Dec-2026

BOQ

Name of Work:- Construction of new PS Building at Raghunathpalli PS (Urban PS), Raurkela.
Sl. No. Item Description
150000000Earth work in hard soil or gravelly soil within 50minitial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth.Ground Floor
250000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
350000008\\"Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. \\"Ground Floor
450000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
550000018\\"4\\"\\" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. \\"Ground Floor
65000002012mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
7First Floor
8Second Floor
9Third Floor
10500000216mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.Ground Floor
11First Floor
12Second Floor
13Third Floor
145000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
15First Floor
16Second Floor
17Third Floor
1850000023Providing and applying priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc. complete.(Exterior Primer, Brand :- Dulux Sealer E800(Product code 9061393) or Equivalent product of Asian Paints or Berger)Ground Floor
19First Floor
20Second Floor
21Third Floor
2250000025Wall painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before applicatio n.(Plastic Emulsion Paint, Brand :- Dulux Interior Acrylic Emulsion DIAE (Product code IN23609081) or Equivalent product of Asian Paints or Berger)Ground Floor
23First Floor
24Second Floor
25Third Floor
2650000035Providing & fixing Ceramic tiles of approved size in dados, skirting(Special Plain/printed series ceramic wall tile of premium grade having thickness of 6.5 mm to 6.7 mm )confirming to IS 13753 (20cmx30cm/20cmx20cm)and riser of step over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing & polishing with cost of all material labour T & P etc complete.(Make :- NITCO/RAK/VERMORA/KAJARIA/JOHNSON)Ground Floor
27First Floor
2850000036Fixing tiles in floors, treads or steps and landing(Special Plain/printed series ceramic floor tile of premium grade having thickne ss of 7mm to 8mm thickness)(30cmx30cm/40cmx40cm)confirming to IS 13755 on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, m aterial, labour T & P etc complete.(Make :- NITCO/RAK/VERMORA/KAJARIA/JOHNSON)Ground Floor
29First Floor
3050000044Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ).Ground Floor
31First Floor
32Second Floor
3350000057Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height.Ground Floor
34First Floor
35Second Floor
3650000063One coat of priming with approved primer over new wood work. including cost of all materials ,labour T& P etc complete.(Primer, Brand :- Dulux Duwel wood Primer(Product code 340300) or Equivalent product of Asian Paints or Berger)Ground Floor
37First Floor
38Second Floor
3950000071\\"2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard grinite chips on new work including cost of labour,material,T&P etc all complete. \\"Ground Floor
40First Floor
41Second Floor
4250000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
4350000490Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure.Ground Floor
44First Floor
45Second Floor
46Third Floor
4750000495Fly Ash brick masonry in cement mortar 1:4 (1 cement:4sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75 kg per sq. cm with dimensional tolerance +/-2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure.Ground Floor
48First Floor
49Second Floor
5050000742Painting two coats of Anti-fugal weather coat water proofing paint including scaffolding and cleaning the surface before application .including cost of all materials ,labour T& P etc complete.(Weather coat, Brand :- Dulux Weathershield Project(Product code IN45100081)(5 Years warranty) or Equivalent product of Asian Paints or Berger)Ground Floor
51First Floor
52Second Floor
53Third Floor
5450000879Supplying, fitting and fixing of Chequre tile in floor skirting dado on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete.(Make :- NITCO/RAK/VERMORA/KAJARIA/JOHNSON)Ground Floor
5550000884Enamel painting two coats including cost of all materials, brushes,putty etc.including cost of all materials ,labour T& P etc complete.(Enamel, Brand :- Dulux Gloss Premium Enamel M900(Product code 5888571) or Equivalent product of Asian Paints or Berger)Ground Floor
56First Floor
57Second Floor
5850001694Supplying, fitting & fixing of Vetrifed Tile in floors of size 600mm x 600mm (colour / printed series)(8 mm to 10 mm thickness )(homogeneous)of approved make conforming to IS : 13755 laid on 20 mm thick cement mortar and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the works all complete as per direction of Engineer -in- charge. (For new work only)(Make :- NITCO/RAK/VERMORA/KAJARIA/JOHNSON)Ground Floor
59First Floor
60Second Floor
6150001814Supplying and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete(Make:- DUROPLAST/SIMTA ASTRIX/NCL VEKA)Ground Floor
62First Floor
63Second Floor
6450010360Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB)Ground Floor
65First Floor
66Second Floor
67Third Floor
6850010372Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS)Ground Floor
69First Floor
70Second Floor
7150010384Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND)Ground Floor
72First Floor
7350010396Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)Ground Floor
7450010408Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM)Ground Floor
75First Floor
76Second Floor
7750010420Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES)Ground Floor
78First Floor
79Second Floor
8050010432Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC STAIRCASE)Ground Floor
81First Floor
8250010444Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM)Ground Floor
8350010446Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS)Ground Floor
84First Floor
85Second Floor
8650010458Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS)First Floor
8750010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
88First Floor
89Second Floor
90Third Floor
9150010518Supplying fitting fixing of GRG ready made cornices of 100 mm thick including screw and adhesive to all the cornices. Make:-Aerolite/Ramco Hilux board .Ground Floor
92First Floor
9350010542Providing, Fitting and Fixing of three track (122mmx 54mm) height below 1.5 Mtr.UPVC glazed sliding window Premium quality with frames and sashes shall be from white UPVC profile. All section of frame and sashes shall be reinforced with galvanized steel in single continuous length, holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes, window shall be such that glazing or deglazing on site possible without the need to remove the outer frame from the structure of the building. Glazing must be used 5mm thick reflective toughened glass with weather seal. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap in between the frame and wall should be filled with silicon sealant for inner frame sealing complete with all fixtures in all respect. UPVC Window make:-DUROPLAST / SIMTA ASTRIX / NCL VEKA, All GLASS work:- Saint-Gobain/AIS (ASAHI).Ground Floor
94First Floor
95Second Floor
9650010554Providing, supplying and fixing of UPVC Glazed Fixed Louvered Ventilator of size 600 mm X600 mm made out of multi chambered UPVC of DUROPLAST / SIMTA ASTRIX / NCL VEKA having isolated drainage, holes about 8 mm dia. to be provided @ 300 mm C/C outer side of lower sashes and reinforced with Galvanized Iron profiles throughout the window with Fan(185mm)of USHA / CROMPTON/Havells/Anchor. The outer frame having an overall size of 39 mm x 39 mm x 2.2 mm thickness with reinforcement of 1.2 mm . Ventilator shall be provided with 4 mm Pin Head glass, standard hardware. Wall thickness of frame and Mullion shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work with transportation and wastage.Ground Floor
97First Floor
9850010620Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY)Ground Floor
99First Floor
100Second Floor
101Third Floor
10250010668Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/GreenGround Floor
103First Floor
104Second Floor
10550010704Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej).Ground Floor
106First Floor
10750010716Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing.Ground Floor
108First Floor
109Second Floor
11050010729Supply, Fitting and Fixing of Grated Door and Window and ventilator (with wire mesh) including cost of Material and Labour as per the specification provided in Drawing . (SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)).Ground Floor
11150010827Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL.Ground Floor
112First Floor
11350010839Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX.Ground Floor
114First Floor
115Second Floor
11650010851Providing and fixing of 12mm thick toughened glass door for glass partition with patch fitting, the glass edges will be high polish for all the sides with cutting hole for top patch, bottom patch ,lock and 12 inch SS handle. The patch fitting will be SS 304 grade with high quality floor spring make as per ISI certification. The price including of lifting of glass up to 5th floor, transportation and installation. [NSWI] All Glass work:- Saint-Gobain/AIS (ASAHI), Hard ware fittings :-Godrej.Ground Floor
11750010863Supplying all materials and labour for making Full Partition wall with 10mm thick Toughened glass as per approved design and specifications. Edges of glass is to be well polished, fixed with necessary hardware, including cost, conveyance, loading, unloading of all materials, cost of all labour, scaffolding, staging (if required) for the works etc. complete in all respect. [NSWI] All Glass work:- Saint-Gobain/AIS (ASAHI), Hard ware fittings –Godrej.Ground Floor
11850010891Providing, fitting fixing of wall paneling made out of Aluminium Section no 9835 as horizontal and vertical member placed at a spacing of 600mm x 600mm c/c with 8mm thick WPC covering with 1mmthick laminate etc. complete with all material and all labour T and P etc. as per specification provided in the drawing . Aluminium Sections make:- FINESTA/HINDALCO/JINDAL, WPC board:- Greenply Endure/Century , Laminate make:- Century lam/Greenlam/Marino .Ground Floor
11950010915Providing, fitting and fixing of Gypsum false ceiling with Aluminium anodised T section no. 3215 with 2feet center to center, L section no. 1705 up to 15 microns on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2 feet x 2 feet suspended from ceiling etc. complete including cost of 12.5mm thick Gypsum board, all labour and material etc. complete. Aluminium Sections make:- FINESTA/HINDALCO/JINDAL, Gypsum board Make:- India Gypsum (SAINT GOBAIN) / USG Boral .Ground Floor
120First Floor
12150010951Providing and fixing low height partition using aluminium extruded rectangular tube of 38.10mmx25.40mmx2.41mm of horizontal and vertical frame of requisite size as per detailed drawing and specification, whereas aluminium frame members to be placed one at floor level. 2nd at 600mm horizontally and vertically not more than @ 600mm center to center, with 2 nos of members at ends of partition and fixing be 12mm WPC of above said make grade ply up to a height of 3 feet from floor level conforming to IS 303 of approved quality finished with a combination of 1mm thick laminate complete of approved shade on both side of partition of Premium quality with all exposed area of edge of partition with teak wood moulding with melamine finish and fixing of 12mm thick toughened glass of Premium quality with etching/ frosted film as per the detailed drawing including labour, material, T and P, wastage, transportation, etc. all complete. (NSWI) Aluminium Sections make:- FINESTA/HINDALCO/JINDAL, Laminate Make: Greenlam/ Centurylam ,Marino all Glass work:- Saint-Gobain/AIS (ASAHI).Ground Floor
12250010963Supplying, Fitting and Fixing of 12 mm thick Digital Glazed Vitrified TACTILE on floor of size 300mm x 300mm of approved shade used for ground surface indicator for disabled blind persons, access to meet officers and waiting areas laid on 25 mm thick cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T and P etc. required for the works all complete. [NSWI] TACTILE make:- NITCO/RAK/VARMORA, Epoxy Grout make:- ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout)Ground Floor
12350011560Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS).Third Floor
12450011877Providing and Fixing of Wall-Paper to the Walls and Columns approved make and design includeing as per approved brand and polishing with cost of all materials etc.Make-Excel/Marshalls.Ground Floor
125First Floor
12650015685Supplying fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtiure etc.completed. (Make: Century/Green)and hardware fittings(Godrej /Dorset)Ground Floor
127First Floor
128Second Floor
12950015997Providing and applying priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc. complete.(Interior Primer, Brand :- Dulux Smart Choice interior Primer(Product code 5760016) or Equivalent product of Asian Paints or Berger)Ground Floor
130First Floor
131Second Floor
132Third Floor
13350016973Supplying,fitting & fixing of grinite tile 20 mm thick above 0.4 sqm in floors,treads rise and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete.Ground Floor
134First Floor
13510000556Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories,tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well).(Icluding both LABOUR FOR DRILLING 200MM DIA UPTO 30 MTR. & LABOUR FOR DRILLING 150MM DIA FROM 30 MTR TO 150 MTR including all.) CONSIDER FOR 150 MTR DEPTH.Ground Floor
13610000564Lowering 200mm dia. PVC pipes with or without slotted pipes as per the necessity from ground level with fitting and fixing the same in a perfectly vertical position. This includes cutting, threading pipes/slotted pipes with providing and fixing of required jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells so as to prevent entry of foreign materials from above. (FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG).(Make-Oriplast, Hariplast ,Supreme, Finolex)Ground Floor
13710000570Cleaning and developing 200mm dia. tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour .(FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG).Ground Floor
13810000583Supplying and fixing of control panel board with all accessories. (UPTO 3HP SINGLE PHASE) Make: KSBGround Floor
13910000588Supplying and fixing of HDPE Pipes 32/40 mm (High Density Polyethylene pipes having inner dia. 32mm and outer dia. 40mm) 6Kg/Sq. cm With IS specification.(32MM NOMINAL BORE SIZE). Make Finolex/Oriplast/Supreme/Hariplast.Ground Floor
14010000594Supplying and fixing of PVC coated steel rope including cost of material, labour etc. complete. Make-Mahdev/AerolexGround Floor
14110000596Supplying and fixing of Finolex/L&T/Cable 4 Sq. mm (3core copper wire flat cable with PVC insulation).Ground Floor
14210000600Supplying and fixing of accessories like Nipple, Bore cover, MS clamp, Nut Bolt, Stainless steel nipple, Short piece, GI bend, Socket etc. complete.Ground Floor
14310000602Installation charges pump set with all accessories including transportation etc.Ground Floor
14410001184Supplying of 200mm inner dia. PVC casing pipe for deep bore well CD (deep well casing) type basing on IS-12818-2010, wall thick ness 13mm to 14.8mm with One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trapezoid-type, and protection caps are provided on the threads to protect the threads in transit. With pressure ratings ranging from 7.5 to 20 bar (PN). Make: ORIPLAST/SUPREME/FINOLEX/HARIPLASTGround Floor
14510001190Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.1.5HP, Single phase,32D,19 Stage (head 50-129m). Make: KSB(2C/21).Ground Floor
14650010566Providing, fabricating and installing L shaped executive table,overall sizeof (1800mmx1800mmx750mm)asper theapproveddesign made up 19mm thick BWP ply with 1mm thick laminate finish of approved shade on all exposed surface. Allinternal surfaces shall be finished with balancing laminate of0.8mm thick, matching with the approved shade of laminate intable without any visible joint, groove, with 3nos drawers,1 no cup board,Key board tray provision using 12\\" triple slidetelescopic channel. There should be adequate space for CPU,UPS complete in all respect including necessary fittings,fixtures,transportation, labour, materials, etc. Themeasurement should be taken from the top area. Make:- BWP Ply (Century Sainik 710 / Greenmarine gold 710), Laminate (Greenlam/ Centurylam),Hard warefittings (Godrej).[NSWI]Ground Floor
14750010568Providing, fabricating and installing reception table, overallsize of (2100mmx600mmx750mm) as per the approved design made up18mm thick BWP ply with 1mm thick laminate finish of approved shade on all exposed surface. All internal surfacesshall be finished with balancing laminate of 0.8mm thick,matching with the approved shade of laminate in table withoutany visible joint, groove, with 2nos drawers,2 nos cup board,led light strip on front side complete in all respect as perdrawing and design including necessary fittings, fixtures, transportation, labour, materials, etc.Themeasurement should be taken from the top area. Make:- BWP Ply (Century Sainik 710 / Greenmarine gold 710), Laminate (Greenlam/ Centurylam),Hard warefittings (Godrej).[N.S.W.I]Ground Floor
14850010570Supplying, Fitting and Fixing of Conference Table made out of 25 mm thick top of 600 mm width fitted with continues shelve below top of 300 mm width & front cover with 600mm (W) having Partition leg of 450 mm width each in 1200 mm internal made of 19 mm BWP board with all exposed portion fitted with 1 mm thick laminates of approved colour etc & 2mm Thick edge banding of matching colour. There will be Provision for connection of audio system, Net & Laptop and any other electronic apparatus for all the participants. Table height 750 mm & shape as per drawing design as per engineering in Charge complete in all respect.BWP ply (Make Century Sainik 710, green marine gold 710),(Hard ware fittings:- Godrej),Laminate(Greenlam/ Centurylam)Ground Floor
14950010927Providing and fixing of Storage Cabinet / Cup board made of 18mm WPC Board,ISI Certification Cabinet will have horizontal panel should be finger joints. The door shutter will be fixed using 9 degree auto hinge. The surface of the Cabinet will be finished with gloss finish laminates including 1st quality teak wood moulding and leaping.Cabinet will have provision for door, with lock and key with ISI certification hardware. WPC board:- Greenply Endure/Century , Laminate make:- Century lam/Greenlam ,Marino Hardware fittings- Godrej.Ground Floor
15050010987Providing and fixing Work station of size in plan and height of 0.75mt as per site condition having working desk of 0.75mt height from floor level. The table top should have 19mm BWP grade ply confirming to IS standard of approved make and quality. The top surface and side should be laminated with 1mm thick laminate of glossy/matte finish premium quality of approved shade. Along with cupboard with 1 draw + 1door + CPU stand, etc. All internal surface should be finished with 0.8mm thick internal laminate of white or ivory, the cabinet hinge should be 3D soft close 4H half overlay 9 degree auto hinge(Godrej-2507),telescopic channel will be 12 inch long triple sliding(45kg)(godrej-8174), SS pull handle 100mm x 12mm(Godrej-7782), MP drawer lock(Godrej-8000) and the cost includes all materials, labour, T and P, hardware etc. complete in all respect.(NSWI) Make: BWP Ply(Century Sainik 710/ green marine gold 710), Laminate(Greenlam/ Centurylam/Marino).Ground Floor
15150016745\\"APO Bed Fram:-Bed Frame Assembly is a welded of side Frame,Inner Slat & Cladding.The side frame are made assembly of Rect . Tube 50.8 x 25.4 x 1.2 mm THK MS, Assembly Inner Slats of Sq.Tube 19.0 x 1.0 mm THK MS ERW TUBE IS:7138 Make- Godrej Head Board & Tail Board:-Head Board & Tail Board are made up of SQ. Tube 30.0 x 1.2 mm THK & Sq. 19.0 x 1.0 mm THK MS Erw Tube IS:7138 and support Bracket 3.2 mm THK MS Sheet IS:513 Make- Godrej Head/Tail Board Connected with Bed Frame with Mosquito Rod Holding:- Mosquito Rod Holder is Made uo of ø22 x 1.0 mm Thk MS Erw Tube. Make- Godrej Finish:- Epoxy Polyster P.Coat- colours ( As per work Order)_ DFT 40-60 Micron. Make- Godrej Cladding:- 1.2 mm Thk CRCA BEDFRAME WIDTH (W) : 1980 MM OVER ALL WIDTH (W1) : 2084 MM DEPTH (D) : 915 MM HEIGHT (H) : 650 MM BED STEAD HEIGHT(H1) : 400 MM\\"Ground Floor
15250017007APO Aero full Back: SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18. The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. * SEAT SIZE (Larger Seat Depth): 47.0 cm. (W) x 51.5 cm (D) * BACK SIZE: 45.0 cm. (\/V) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: • Up-Down adjustment— 8 steps (8 0+0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. » Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEIGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°. Pedestal Assembly: the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch center dia is 66.1+0.5 cm TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. Make : Godrej(Item Code-56101522SD05869)Ground Floor
15350017009APO OXBO Mid Back :-SEAT ASSEMBLY: The seat assembly OF APO OXBO Mid Back of godrej make should be made up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE: 46.5 cm (W) x 60.5 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-Polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • Upright position locking. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon(Item Code-56101522SD03157)Ground Floor
15450017011APO 1007 Cushioned Chair with Armrest: SEAT/BACK ASSEMBLY: The seat and back are made from 1.0 ±0.1 cm thk. flat plywood measured as per QA method described in OCP-QLTA-P14-18 upholstered with moulded polyurethane foam and fabric. BACK SIZE: 42.0 cm (W) × 28.5 cm (H) SEAT SIZE: 42.0 cm (W) × 42.0 cm (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =45+/-2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. UNDERSTRUCTURE ASSEMBLY: The understructure assembly is a cantilever type mainframe made of Ø 2.54 ±0.03 cm × 0.2 ±0.016 cm thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). ARMREST ASSEMBLY: The armrests are made in twin tube form using Ø 1.58 ±0.02 cm × 0.16 ±0.0128 cm thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Make: Godrej(Item Code-56101522SD02696)Ground Floor
15550017015APO PREMIUM LOUNGE 3 Str CHAIRS: SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated (DFT 40-60 microns). The ends should be fitted with ABS moulded end caps. 2)TIE MEMBER: It should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. The tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated (DFT 40-60 microns). The seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. 3)SEATREST ASSEMBLY: The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4)BACKREST ASSEMBLY: The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) 5)ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface. Back: (W)52.0 cm x (H)59.0cm x 6.0cm(T), Seat : (W)52.0cm x (D) 50.0cm x 6.0cm(T) Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-60.5cm and Depth-70.0 cm. Make : Godrej(Item Code-56112105SD00039)Ground Floor
15650017019APO Pisa Center Table :-APO PISA SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. 2)PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm. Make : Godrej(Item Code-56112105SD00104)Ground Floor
15750017021APO Pisa Side Table :-APO PISA SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. 2)PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm. Make : Godrej(Item Code-56112105SD00105)Ground Floor
15850017025APO Adriana Single Bed Walnut: This bed of godrej make walnut-finish single bed is designed for durability, comfort, and modern aesthetics. Measuring 113.1 cm x 93 cm x 203 cm, it fits a recommended mattress size of 78\\" x 36\\" with a minimum thickness of 5 inches. Crafted for everyday use, the bed weighs 60.70 kg and offers a sturdy structure for long-lasting support. It comes in a knock-down delivery condition for convenient transportation and easy assembly. The bed does not include storage, making it ideal for compact and minimalist interiors. Its elegant walnut finish complements various décor styles, while the product is backed by a 1-year warranty for added assurance.Primary Material:Wood & Primary Material Subtype: Engineered Wood.( Item Code- 56101515SD00048)Ground Floor
15950017031APO Storwel plain of make godrej shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.( Item Code-30161806SD00046)Ground Floor
16050017081APO PREMIUM LOUNGE 2 Str CHAIRS: 1)SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated ( DFT 40-60 microns ). The ends should be fitted with ABS moulded end caps. 2)TIE MEMBER: It should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. The tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. 3)SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4)BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) 5)ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface. Back: (W)52.0 cm x (H)59.0cm x 6.0cm(T), Seat : (W)52.0cm x (D) 50.0cm x 6.0cm(T) Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-60.5cm and Depth-70.0 cm. Make: Godrej(Item Code-56112105SD00022)Ground Floor
16150017085APO MERAKI MediaUnitBrn/Beige godrej make: Overall Size : Width : 180.4cm Depth : 49.5cm Height : 50.4cmMaterial :All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom is made of .9 mm thick prelaminated particle board. Drawer front is made of 18 mm thick PU painted MDF. Middle doors are made of 4mm thick toughened glass with PU paint in black .All drawers are fitted with knobs. Legs : Rubber wood Hardware : Hettich .Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 2 nos(Item Code-56101505SD00125)Ground Floor
16250017087APO Swing Mat 78 36 4:-The Interio by Godrej APO Swing mattress is designed to deliver exceptional comfort, durability, and reliable support for a restful sleeping experience. Measuring 198 cm in length, 91 cm in width, and 10 cm in thickness, it is ideal for everyday use in modern bedrooms. Crafted with high-density foam construction, the mattress provides a balanced combination of extra plush comfort and firm support for improved relaxation and body alignment. The tight top design enhances durability and maintains shape over time, while the premium fabric cover adds softness and breathability. Finished in an attractive red color, this mattress combines style, functionality, and long-lasting performance for comfortable slee(Item Code-56101508SD02049)Ground Floor
16350017089APO Neon Pillow 16 24 1:-Godrej APO Neon Pillow is 100% soft polyester fabric that keeps the pillow durable, lightweight & wrinkle resistant. • Peached polyester fabric for soft & comfortable feel. • 500 grams eco-friendly PET fiber ensures even support and comfort. • Attractive yellow-white packaging.( Item Code-56101508SD08227)Ground Floor
16450017171APO Matrix 3 Str Comm Arm, T. White Back: (W)41.6 cm x (H)23.0cm,Seat: (W)47.8cm x (D) 44.6cm Overall Dimensions of Chair Seat Height - 44.1 cm.Height - 78.5 cm.Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm. The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations. They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel. The welded assembly should be powder coated ( DFT 40-60 microns). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk. The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring. Connecting beam should be fitted with snap locking end cap. lt also aids in side-by-side understructure alignment. Armrest assembly consshould be ts of armrest frame and armrest pad. The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated (DFT 40-60 microns). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. (Item Code-56101522SD03977)Ground Floor
16540000946Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
16640000949Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
16740000952Recessed wiring to Calling Bell Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular bell push ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-bell push switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
16840000955Recessed wiring to Bulk Head Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
16940000958Recessed wiring to Television Point (Modular)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/TV socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK).Ground Floor
17040000961Recessed wiring to Telephone Point (socket)with 2 pair 0.5sqmm telephone cable with 20 mm dia non metalic PVC flexible conduit with socket ISI marked MS Box including all accessories and connection.( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-s witch-Telephone socket -Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK).Ground Floor
17140000964Recessed wiring to Portico Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . ( Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch /Ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17240000967Recessed wiring to Ceiling Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17340000970Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17440000973Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17540000976Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17640000979Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17740000982Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17840000985Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
17940000988Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
18040000991Point wiring for Computer Point ( MODULAR) with 2.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with3 Nos of 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
18140001000Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI/RR/POLYCAB) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK)Ground Floor
18240001006Recessed wiring to submain in 2 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI/RR/POLYCAB) CSR SL .No- 1.8.4)(Make of PVC pipe-AKG/NORPACK)Ground Floor
18340001012Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI/RR/POLYCAB) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK)Ground Floor
18440001015Recessed wiring to submain in 4 x 10 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI/RR/POLYCAB) CSR SL .No- 1.8.11)(Make of PVC pipe-AKG/NORPACK)Ground Floor
18540001039Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI/Gloster)Ground Floor
18640001126providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18)Ground Floor
18740001129Supplying and fixing of 6\\"X4\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam)Ground Floor
18840001132Supplying and fixing of 8\\"X6\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam)Ground Floor
18940001135Supplying and fixing of 8\\"X10\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam)Ground Floor
19040001141Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
19140001145Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
19240001148Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
19340001151Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
19440001154Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
19540001166Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK]Ground Floor
19640001172Supply of U-type fan hook(Make-TATA)Ground Floor
19740001190Supplying and fixing of Call Bell/buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required (CSR sl no-1.30)Ground Floor
19840001193Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells)Ground Floor
19940001218Supply and Fixing of 125 AMP. TPMCCB [35 KA] - 01 SET WITHOUT METER SPACE OUT GOING 100 AMP , 25 / 3 MM. COPPER BUS BAR - 04 NOS INSTRUMENTS 0 –100 AMP. AMMETER WITH SELECTOR SWITCH - 01 SET 100 / 5 AMP. CT - 01 SET 0 – 500 VOLT. VOLTMETER WITH SELECTOR SWITCH - 01 SET INDICATING LAMP WITH CONTROLLING SWITCH - 01 SET etc.including all accessories and connections as per instruction of Electrical Engineer-in- Charge. [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK]Ground Floor
20040001234supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
20140001258SUPPLY & FIXING OF POWER DISTRIBUTION BOX,MAKE-NET RACK/VAL RACKGround Floor
20240001304Earthing with Cupper plate 600 mm x 600 mm x 3.15 mm thick 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing)Ground Floor
20340001679Supply and fixing of surface mounted led 12 wt square/round portico light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections (Make- CROMPTON/ PHILIPS/ WIPRO)Ground Floor
20440001703Supply and fixing of 2 way single door MCB box with 1 no 32 AMP DPMCB with sheet steel encloser,distribution board,on surface /recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and power painted including earthing etc as required(Sl no-2.3.6,2.7)[Make-(a)MCB -Legrand/L &T/ABB/SCHNIDERGround Floor
20540001876Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic)Ground Floor
20640001879Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK)Ground Floor
20740001883Recessed wiring to Gate light Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge .( Make of wire Finolex /Anchor / Havells/V guard) Make-switch /Angle holder-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
20840003121Copper pipe with insulation.Ground Floor
20940003123Drain pipeGround Floor
21040006336Supply & fixing of 6 Way VTPNDB IP 43-Metal Door Incoming: 1 No of 100 A Four Pole MCCB with stud connector Outgoing: 6nos 40 A TPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )[Make-(a)MCB /MCCB -Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC )Ground Floor
21140008124Supply & fixing of 400mm (16\\") wall mounted fan with complete accessories[brown/white].including hanging and connections [MAKE- USHA MODEL-MIST AIR DUOS/ CROMPTON MODEL-TROPEDO HI SPEED//HAVELLS/V-GURAD MODEL-PETAL WF 17/ANCHOR)Ground Floor
21240008126Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR)Ground Floor
21340008142Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER)Ground Floor
21440008158Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO)Ground Floor
21540008291Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing)Ground Floor
21640008495Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL)Ground Floor
21740008505Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX)Ground Floor
21840008507Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX)Ground Floor
21940008509Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszh ,2mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-3-LS)/DIGISOL/MOLEX)Ground Floor
22040008511Supply & fixing of information outlet with faceplate,single port ,modular straight shu and keystone,cat-6 utp,white,toolless type(MAKE-D-LINK/MOLEX/DIGISOL)Ground Floor
22140008513Supplying & fixing of patch panel ,24 PORT,CAT-6 UTP 180 Degree including all accessories and connections(Make-D-Link(Model N o-NPP-C61BLK241)/MOLEX/DIGISOL)Ground Floor
22240008586Supply and fixing of 24 Port Gigabit Smart Managed Switch with 4 Gigabit SFP Ports including all accessories and connection(Make-D-LINK(MODEL NO-DGS-1210-28)/DIGISOL (MODEL NO-DG-GS1528)/MOLEX)Ground Floor
22340008640Providing and fixing of 18 wt. LED COB Light fitting with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON)MODEL NO-CDR-210-18-30/40-SL-NWH/WIPRO(MODEL NO-LD98-271-024-40-G1)/PHILIPS(MODEL NO-18W COB PRO)Ground Floor
22440009312Supply and installation of 1.5Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 4 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA518ENU/AKABISHI(MITSUBISHI)MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEKGround Floor
22540010756Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make-CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001)/PANASONIC (MODEL NO-PBUM01097)/HAVELLS(MODEL NO-ADORE)Ground Floor
22640010758Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- PANASONIC(MODEL NO-PBTM012 07)/HAVELLS(MODEL NO-PHOTON ULTRA)/CROMPTON(MODEL NO-CCS-102-20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4'/ WIPRO(MODEL NO-LL20-221-XXX-65NE3)Ground Floor
22740011132Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- PANASONIC(MODEL-PSTM27258)/HAVELLS(MODEL-ENDURA SUNDOWN30W)/CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO)Ground Floor
22840011134Supply & fixing of 45 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make-PANASONIC(MODEL-PSTM27458)/HAVELLS(MODEL-ENDURA SUNDOWN45W/ CROMPTON(MODEL NO-TRP-417-45-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP031 LED45S 45W 4500LM)/ WIPRO(MODEL NO-LR08-611-XXX-57-XXGround Floor
22940011146Supply and fixing of Bulk Head fitting with 10/12 wt. LED Bulb including all accessories and connections . (Make- PANASONIC(PMHM01107 / HAVELLS-RUGB4GENX10W960)Ground Floor
23040011699Supply & fixing of 120 Wt. LED FLOOD light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories and as per instruction of Electrical Engineer-in-charge . (Make- PANASONIC(MODEL NO-PFLM18CD8R1)/HAVELLS(MODEL NO-JETAIRIS)/CROMPTON(MODEL NO-TRP-411-120-57-SL-GL-NSG)/PHILIPS(MODEL NO-BRP033 LED120S 120W 12000 LM)/WIPRO(MODEL NO-LR08-132-XXX-57-XX)Ground Floor
23140011787Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX)/PANASONIC MODEL NO-PPAM12156BS/HAVELLS MODEL NO-OCTANE)Ground Floor
23240012942Supplying & installation, testing and commissioning of post top lantern of 40 watt LED luminare with all accessories and including connection etc. ( Gate light )(Make-CROMPTON(MODEL NO-LPTO-40-CDL-M (40 WATT)/PHILIPS/WIPRO MODEL NO-LP07-501-XXX-57-C L/PANASONIC(MODEL-PPTM02408)/HAVELLS(MODEL-RUBY 40W)Ground Floor
23340013090Supply and fixing of on 24 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON/ PHILIPS(MODEL NO-22W DURASLIM ROUND/SQUARE 208 MM/WIPRO(MODEL NO-LD80-281-XXX-60-G1/PANASONIC/HAVELLS(OCTANE)Ground Floor
23410000002\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR 11) conforming to IS:15778,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge (MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" For 20mm nominal outer dia pipesGround Floor
23510000004\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR 11) conforming to IS:15778,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge (MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" For 25mm nominal outer dia pipesGround Floor
23610000006\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR 11) conforming to IS:15778,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge (MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" For 40mm nominal outer dia pipesGround Floor
23710000008\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR 11) conforming to IS:15778,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge (MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" For 50mm nominal outer dia pipesGround Floor
23810000174Providing and Laying in trenches Unplasticised PVC pipes conforming to IS : 4985-2000 and specials of the following outside diameter for all classes, including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete.160mm dia. rigid UPVC Pipes,Class-3 (0.60 mpa). (MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) (160mm dia rigid UPVC pipe Class- 3 (0.60 mpa)).Ground Floor
23910000176Providing and Laying in trenches Unplasticised PVC pipes conforming to IS : 4985-2000 and specials of the following outside diameter for all classes, including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete.110mm dia. rigid UPVC Pipes,Class-3 (0.60 mpa).(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) (110mm dia rigid UPVC pipe Class- 3 (0.60 mpa)).Ground Floor
24010000296\\"Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 T ype A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .).(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" according to AR-2013 SL NO-3.3.3(V)Ground Floor
24110000298\\"Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 T ype A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .).(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" .110MM DIA PLAIN BEND P.V.C SWR TYPEGround Floor
24210000300\\"Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 T ype A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .).(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" .110mm dia bend with door P.V.C SWR TYPEGround Floor
24310000304\\"Fixing 110mm size ‘ P ’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification.).(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" 110 MM DIA P.V.C SWR P-TRAPGround Floor
24410000306Fixing floor traps of the following nominal diameter of outlet of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification.110mm dia p.v.c Nahani trap without jally.Ground Floor
24510000308\\"Fixing floor traps of the following nominal diameter of outlet of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification.(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" 110mm dia GULLY Trap P.V.C SWR TYPEGround Floor
24610000310\\"Providing and fixing on wall face PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" 110 mm dia off set p.v.c swr type.Ground Floor
24710000312\\"Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 T ype A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .(MAKE:- SUPREME/FINOLEX/ORIPLAST BRANDS) \\" 110 mm dia cowel P.V.C SWR TYPE.Ground Floor
24810000326Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 380X580X350 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.Porcelam Flat back standmg Urinal (Medium)380 x 580 x 350 including all & As per the direction of the E.I.C.Ground Floor
24910000332Providing and fixing Stainless Steel Kitchen Sink with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. 24'' x 18'' x10'' Steel Sink single bowl (PARRY WARE) OR NIRALI (Orra BG)(Large) etc. Stainless steel kitchen sink - 24'' x 18'' x 10'' Steel Sink Single bowlGround Floor
25010000346Supplying , fitting & fixing of C.P Screw-down Two way Short Body Bib Cocks (Taps) polished bright conforming to IS:781-1995 with CP flange and CP extension piece of the following nominal sizes as per specification complete. 2-Way Bib Cock with Wall Flange (SQT-CHR-512ANKN)(Weight-0.75kg) Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .Fittings : Components have WRAS Approved for food grade conformity with Brass Housing and Spindle.or equivalent product of Parryware / CeraGround Floor
25110000376Providing and fixing framed mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification. AR.-2013 ,SL.-NO-3.4.26.Ground Floor
25210001086\\"Supplying , fitting & Fixing of water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Orissa Pan With L Bend And Extension, Size: 440x575x250 mm(ECS-WHT-451LE)(Weight- 17.6 kg)Warranty - 10 years on Essco sanitaryware.or equivalent product of Parryware / Cera \\"Ground Floor
25310001088Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall.Ground Floor
25410001094Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm.Ground Floor
25510001096Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete, with cement concrete (1:3:6) and 12mm cement plaster (1:3) along with Cement punning.Ground Floor
25610001098\\"Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX \\"110mm Dia Inlet & Outlet floor trap PVC SWR type.Ground Floor
25710001102Fixing of Back to wall WC with UF soft close seat cover, hinges, accessories set with rack bolt 12mm dia stainless steel Size(360x51 5x410mm) (FOR DISABLED) Floor Mounted to the floor fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification WITHOUT CISTERN. make: JAQUAR (DIS-WHT-9 3955P180UF)/ KOHLER(K-2983IN-S-O) DISABLED PERSON COMMODEGround Floor
25810001124Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
25910001126Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
26010001128Providing and fixing of 50mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 50 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
26110001156Providing and fixing of SWIVEL MIRROR of round shape superior glass with steel back cover, with chromium plated brass screws and washers; fixed to head less socket caps, wall plugs complete as per specification. Make: JAQUAR- (ACN 1195N). Swivel Mirror round shape.Ground Floor
26210001160Providing & Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing cpvc tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification .(MAKE:- SUPREME/SINTEX /ORIPLAST BRANDS) Triple Layer Cylindrical Vertical water storage tanks.Ground Floor
26310001162Extra over (item No 3.1.8 as per A.R 2013) for hoisting Rotational moulded polyethylene cylindrical vertical water storage tanks of the following size for every additional height of 5 metres or part there of installation on roof as per the requirement and site condition.Ground Floor
26410001172Providing and fixing of 692mm long stainless steel grab bar handle (FOR DISABLED)fixed to head less socket caps, wall plugs and chromium plated screws as per specification . Make: JAQUAR (WAC-WHT-BR0600N) 692mm long stainless steel grab bar handle.Ground Floor
26510001174Providing and fixing of stainless steel vertical swing grab bar (FOR DISABLED) fixed to head less socket caps, wall plugs and chromium plated screws as per specification. Make: JAQUAR (WAC-WHT-BG0800N) Stainless steel vertical swing grab bar.Ground Floor
26610001209Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish.Ground Floor
26710001464Supplying , fitting & fixing of 15 mm dia CP Long Body Bib Cocks ( Taps ) with CP flange and CP extension piece of the following nominal sizes as per specification complete. Long Body Bib Cock with Wall Flange & Aerator(SQT-CHR-512KN)(Weight-0.78 kg)Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .Fittings : Components have WRAS Approved for food grade conformity with Brass Housing and Spindle.or equivalent product of Parryware / CeraGround Floor
26810001466Supplying , fitting & fixing of 15mm dia C.P Screw-down Angular Stop Cocks conforming to of the following nominal sizes as per specification complete. Basin Inlet Connection (Angle Valve)(SQT-CHR-526NKN)(Weight-0.46 kg)Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / CeraGround Floor
26910001468Supplying , fitting & fixing of Brass C.P Screw-down Consealed Stop Cocks conforming to of the following nominal sizes as per specification complete. Heavy body of concealed stop cock Cold Only suitable for 20mm Pipe line with spindle extension & plastic protection cap (without Exposed Parts)(ALE-CHR-514CCR)(Weight- 0.42 kg)Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / CeraGround Floor
27010001470Supplying , fitting & fixing of Chromium Plated Brass Shower rose (over head)all complete as per specification. Overhead Shower 100 mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System(EOS-CHR-542N)(Weight-0.23 kg)Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / CeraGround Floor
27110001472Supplying , fitting & fixing Chromium Plated Arm for overhead shower all complete as per specification.Shower Arm 240 mm Long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange(ALE-CHR-536A)(Weight- 0.24kg)Plating: Nickel-8.0 micron, Chro mium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / CeraGround Floor
27210001474Supplying , fitting & fixing of Health faucet with 1.0 1 Rm Pvc tube all complete as per specification.Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long Easy Flex Tube & Wall Hook(ALE-CHR-585)(Weight-0.445kg)Plating: Nickel-8.0 micron, Chrom ium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / CeraGround Floor
27310001476Supplying , fitting & fixing of Chromium Plated Soap dish holder complete as per specification.Soap Dish (AEC-CHR-1131N) (W eight-0.45kg)Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting. ,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / CeraGround Floor
27410001478Supplying,fitting & fixing of C.P. glass scif with glass with all fixtures complete as per the requirement at site (rates as per sor)Ground Floor
27510001480\\"Supplying , fitting & fixingof CP Towel Rail (600X20)mm complete as per specification.Towel Rail 600mm Long, Stainless Stee l(AEC-CHR-1111N)(Weight - 0.5 kg)Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / Cera \\"Ground Floor
27610001482Supplying , fitting & fixing of Chromium Plated brass Towel Ring complete as per specification.Towel Ring Round(AEC-CHR-1121N)(Weight - 0.25kg)Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .or equivalent product of Parryware / CeraGround Floor
27710001484Supplying,fitting & fixing of Bevelled Edge Mirror with all fixtures complete as per the requirement at site (rates as per sor)Ground Floor
27810001496Supplying , fitting & fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.Porcelain 22\\"x16\\"(550x400)W.H.B and 15mm dia CP Pillar cock,PVC inlet connection pipe,Chromium Plated brass waste,PVC waste pipe etc complete as per the specification. Wall hung basin(ECS WHT-801) (Weight - 15.3 kg) Pillar cock (STE-CHR-107001)(Weight - 0.85 kg) Plating: Nickel-8.0 micron, Chromium-0.20 micron,In ESSCO Nitrile rubber O-rings are used and these are long lasting.,Warranty 10 years for all commercials and domestic uses .Fittings : Components have WRAS Approved for food grade conformity with Brass Housing and Spindle.Warranty - 10 years on Essco sanitaryware and 2 years for spare parts or equivalent product of Parryware / Cera /Prism jhonson / Hindware.Ground Floor
27910001498Supplying , fitting & fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ trap with seat cover conforming to IS 2556 : PART 8-2004 to the floor and chromium plated screws including joining the trap with soil pipe in cement mortar(1:1) etc all complete as per specification. EWC With PP Soft Close Seat Cover, Hinges, Fixing Accessories and Accessories Set, Size: 360x545x395 mm, S Trap(ECS-WHT-551SSPP)(Weight- 18 Kg)Warranty - 10 years on Essco sanitaryware, 2 years for PP seat cover & Spare parts.or equivalent product of Parryware / Cera/Prism jhonson / HindwareGround Floor
28010001500Providing ,fitting and fixing P.V.C low level flushing cistern with manually controlled device ( handle lever ) confirm to IS : 7231,with all fittings and fixtures complete as per the specification. (10 litre capacity )Wall Hung Cistern with 39mm Drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC)(ESH-WHT-184NL)(Weight- 2.5kg)Warranty - Essco cisterns are offered with a warranty of 2 years.for all domestic and commercial uses or equivalent product of Parryware / CeraGround Floor
28150011089The testing of hydraulic pressure as water tightness joint test for uPVC, cPVC and SWR pipes should be done before connection to the overhead tank for open wiring and before plaster for concealed wiring and must be certified by the divisional head. The cPVC SDR13.5 pipe should sustain hydraulic pressure 430 Kgf/cm2/1hr at 200C and shall show no signs of cracking, splitting or breaking. Similarly, the uPVC and SWR pipes push fit type of pressure 6kg/cm2 should sustain water tightness on joints with pressure 0.5Kgf/cm2/15min and shall not show cracking, blisters or excessive delamination after stress relief. The cost includes all hiring of testing equipments, labour, materials, etc. The testing report should be placed before divisional head for confirmation.Ground Floor
282MIS-CVL-AQUAGUARD
28350005074Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I]Ground Floor
28450005354Supplying and installation of storage water cooler cum purifier on floor base having 3 stage advanced purification process(UV based both for cooling and purifying system). The storage tank capacity 80L, cooling capacity 60LPH, water flow rate 1.5L, the body made up of SS304 and the size 640X450X1350mm. MODEL-AG Green Pure Chill 80SS UV (HSN code-8418)[N.S.W.I]Ground Floor
285MIS-CVL-CHAMBER
28650000000Earth work in hard soil or gravelly soil within 50minitial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth.Ground Floor
28750000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
28850000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
2895000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
29050000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
2915000171912mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.Ground Floor
29250010396Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)Ground Floor
29350010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
294MIS-CVL-PAVERROAD
29550000000Earth work in hard soil or gravelly soil within 50minitial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth.Ground Floor
29650000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
29750000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
29850000063One coat of priming with approved primer over new wood work. including cost of all materials ,labour T& P etc complete.(Primer, Brand :- Dulux Duwel wood Primer(Product code 340300) or Equivalent product of Asian Paints or Berger)Ground Floor
29950000884Enamel painting two coats including cost of all materials, brushes,putty etc.including cost of all materials ,labour T& P etc complete.(Enamel, Brand :- Dulux Gloss Premium Enamel M900(Product code 5888571) or Equivalent product of Asian Paints or Berger)Ground Floor
30050001703Providing and laying 60 mm thick Factory made cement concrete interlocking Paver block of M30 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge.Ground Floor
30150011883Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 .Ground Floor
30250013548Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.Ground Floor
303MIS-CVL-R.C.CDARIN
30450000000Earth work in hard soil or gravelly soil within 50minitial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth.Ground Floor
30550000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
30650000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
307500000216mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.Ground Floor
30850010396Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)Ground Floor
30950010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
310MIS-CVL-R.C.CDARIN
31150000000Earth work in hard soil or gravelly soil within 50minitial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth.Ground Floor
31250000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
31350000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
314500000216mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.Ground Floor
31550010396Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)Ground Floor
31650010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
31750010716Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing.Ground Floor
318MIS-CVL-SEPTICTANK
31950000000Earth work in hard soil or gravelly soil within 50minitial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth.Ground Floor
32050000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
32150000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
32250000018\\"4\\"\\" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. \\"Ground Floor
32350000019\\"25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. \\"Ground Floor
3245000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
32550000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
3265000171912mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.Ground Floor
32750001806F.A brick masonary work in cement mortar (1:4) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.(IN FOUNDATION & PLINTH)Ground Floor
32850010360Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB)Ground Floor
32950010420Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES)Ground Floor
33050010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
331MIS-INE-CCTV
33240000982Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
33340001129Supplying and fixing of 6\\"X4\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam)Ground Floor
33440002763Supply, &laying of 25mm dia size of 2mm wall thick PVC conduit with required accessories .(Norpack/AKG)Ground Floor
335MIS-INE-FIREFIGHTI
33640007924Providing , fixing of terrace boster pump of 450 lpm volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase , 50 cycles AC supply as per the details given below.Make:Wilo / Kiloskar Or Lubi.Ground Floor
33740007936Supply, Installation, Testing and Commissioning 100mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti)Ground Floor
33840007944Providing and fixing of Non return valve 100mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR.Ground Floor
33940007952Providing and fixing of 100mm nominal dia C.I. Butterfly valves conforming to PN 1.6/13095 with nuts, bolts, washers, 3mm thick ins ertion rubber gasket and two matching flanges .SANT / ZOLOTO / KARTARGround Floor
34040007960Supply, installation, testing and commissioning 100mm dia CI `Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers etc., complete.SANT / ZOLOTO / KARTARGround Floor
34140007964Providing and fixing dial type pressure gauge with isolation cock and chrome plated copper pipe at hydrant station.Make - H-Guru.Dial diameter 100 mm calibration 0-15 kg/sp.cmGround Floor
34240007968Providing and fixing electrically operated dual type pressure switches with threaded connection for a pressure vessel, complete suitable for 0-15 Kg/Sq.cm model IPS-200 .Make - Dandfos.Ground Floor
34340007972Providing and fixing of 25mm brass ball valve with lever and screwed female ends.(20 kg/cm2)at all level and position .Zoloto/Kartar.Ground Floor
34440007974Supplying and fixing approved make 25 mm dia automatic air release valve suitable for 20kg/sqcm working pressure with necessary fittings complete in all respect at all level and position .Zoloto/Kartar.Ground Floor
34540007980Providing & fixing Two way fire brigade inlet Gunmetal collecting head with 63 mm dia instantaneous type inlet and 150 mm dia flanged outlet fire brigade connection to fire risers (I.S. 904-1965) complete with campanion flange as per table \\"E\\" nuts, bolts, gasket included cutting & welding at all level and position ..Fire shield / KARTARGround Floor
34640007986Supply , Installation , testing and commissioning of control panel of 450lpm fire pump .Make -ASES/LUBI/GREEN POWER .Ground Floor
34740007998Supply and laying of 3C X 6sqmm sqm copper cable Power cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on existing cable trays).(Finolex/Havells/Polycab)Ground Floor
34840008008Providing and fixing SS landing valve conforming to IS -52290 with 63 mm dia. instantaneous female coupling on the outlet with PVC cap with chain, necessary companion flanges ( as per table \\"E\\") nuts, bolts, washer and gasket complete as per specification. (ISI marked) .SAFE GUARD / KARTAR /Ground Floor
34940008010Providing and fixing first aid fire hose reel drum wall mounting, swinging type fitted with 20mm dia. B129 30m long high pressure rubber hose type -II to IS. 5132 or nylone braieded polypropelene hose of approve make with 5 mm outlet S.S. nozzle with shut off valve (IS. 884-1969).(Make-SAFE GUARD / KARTAR / SWASTIK)Ground Floor
35040008012Providing and fixing SS coupling 63 mm dia. 15m long rubberized EPDM lined hose including SS male and female instantaneous type coupling approved by fire authority.(Make-SAFE GUARD / KARTAR / SWASTIK)Ground Floor
35140008014Providing and fixing standard short size SS branch pipe with SS nozzle 16 mm dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked) .(Make-SAFE GUARD / KARTAR / SWASTIK)Ground Floor
35240008018Providing and fixing M.S. structural work fabricated from standard sections e.g. M.S. Rounds, angles, channels, GI clamps including cutting to size drilling, welding including insert plates or \\"Hilti/ Wurth fastners of required specification in RCC structural/masonry.Ground Floor
35340008020Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with locking arrangement and hanging arrangement for accessories painted \\"Fire Red\\" with enameled paint \\"Fire Hose\\" written on front including suitable supports to place 900 mm above ground level properly anchored, approximately size 750x600x250 mm deep (to house two lengths of canvas hose with couplings, branch pipe with nozzle for external hydrants)(Make-Kartar/Newage)Ground Floor
35440008024Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex )Ground Floor
35540008026Providing and fixing stored pressure portable (powder type) ABC - 6.0 kg fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug(Make -Fire shield/Kanex/Safex .)Ground Floor
35640008033Providing and fixing of 4kg clean agent type fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug (Make -Fire shield/Kanex/Safex .)Ground Floor
35740008055Supply ,Installation,testing & Commissioning of convensational 2 Zone Fire Alarm Panel . Make - Agni /ASES Or GST .Ground Floor
35840008065Supply ,Installation,testing & Commissioning of convensational Manual Call Point . Make - Agni /ASES Or GST .Ground Floor
35940008067Supply ,Installation,testing & Commissioning of convensational Hooter . Make - Agni /ASES Or GST .Ground Floor
36040008073Supply and fixing of wall mounting type Auto glow signages of different type like, fire exit with one side arrow /do not use lift in case of fire/Emergency Exit/Staircase Indicating Arrow etc . Sizes :-300x150mm . type .(Make-Prolite autoglow)Ground Floor
36140008099Supply, Installation, Testing and Commissioning 25mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti/ Wurth)Ground Floor
36240008716Providing ,fixing , testing and commissioning of 2C X 1.5 sqmm copper armoured FR cable with PVC rigid counduit, shaddles, grips, screws etc complete.Make - (Make of wire Finolex / Anchor /Havells/ V guard/KEI)Ground Floor
363MIS-INE-L.PROTECTI
36440002086Air-Terminal Supply, Installation, Testing & Commissioning of Early Streamer Emission (ESE-30))type Lightning Air Terminal. Supporting Mast The mounting pole used to support the lightning air terminal shall be minimum length of 05 Mtr. , non corrosive and made up of medium class GI / SS pipe of 1.5″ diameter having base plate at bottom for securely fixing the mast on roof top. The mounting pole and supports shall be securely fixed with the brackets and PVC insulated metallic guy wires to withstand the maximum wind velocity of that area. Protection Radius :- 48 Mtr Make :- ABB / STROMKING/VTR All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
36540002089Lightning Strike Counter Supply, Installation, Testing & Commissioning of non-electronic & non-resettable (Not require any external power supply) type lightning strike counter to count the lightning stroke having display with IP-67 enclosure including all accessories and connection..(6/7 digit) Make :- ABB / STROMKING/VTR All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Engineer-in-Charge.Ground Floor
36640002095Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL/VTR All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
36740002098Supply, connection &Testing of sub earthing with 16 Sq.mm single core multi stranded copper flexible wire from surge protection device (SPD) panel to earth electrode & Main panel board to SPD panel including all accessories, cable socketing and connections. Make :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-ChargeGround Floor
36840002101Supply, Installation, Testing & Commissioning of indoor type wall mounted Surge protection device (SPD) panel made of 2 mm thick CRCA sheet, dust and vermin proof duly powder coated having the following arrangement & complete factory wired by 16 Sq.mm single core multi stranded copper flexible wire. [A] Type 1+2 AC Surge Protection Device (SPD) (TP+N) (50 KA) - 01 Set [B] 63 Amp. HRC fuse with link – 03 Nos [C] 100 Amp. 4 pole stud connector – 01 No Make of SPD & HRC Fuse :- HAVELLS / L&T / LEGRAND/VTR Make of Wire :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
36940002720Supply and laying of 70sqmm single core FR PVC insulated unseathed copper conductor for voltage grade 1100 volt as per IS-694 in sur face/underground as required(sl no-5.5.2)(Make-KEI/FINOLEX/HAVELLS)Ground Floor
37050011217Supplying and fixing of black granite stone inauguration plate of size:- 3 ' x 2 ' engraved with letters,logo of different size as required with golden/any approved colour complete with all respect excluding structural work and fixing charges.Ground Floor
37150011556Providing and fixing of 3D raising letters made of stainless steel of 16 gauge(powder coated mate black), raising 40mm(solid), gap from wall raising 10mm (total raising 50mm) and arranging with Samsung LED modules(2W each) inside of each letter for shadow halow effect. The steel letters will be welded to make it 3D form and all letters (English/Odiya) will be sealed to the avilable base. This cost includes labour, material, scafolding, supply and fixing complete.Make: SS letter 304 grade(JINDAL/NIPPON STEEL of Premium quality)Ground Floor
37250011727Providing and fixing of solid 8mm thick Arcylic (Imported Make: A-Cast/UB Malyasia/Sincolite) fine laser cutting as per the size of the Creatives (any images) , pasting with 220 GSM Eco printed Vinyl on the top of the arcylic and fixing by using adhesive to the solid base to make it uniformity including cost of labour, material, transportation, scafolding, wastage(if any) complete.Ground Floor
37350011739Supplying and fixing of 2mm thick stainless steel name plates with engraving letters of required size by laser cutting process and all letters will be filled by black colour metalic enamel paint (make: Asian paints/Berger/Dulux) of premium quality of life long warranty. This includes cost of labour, materials, wastage, scafolding, etc. complete. Steel 304 grade Make:(JINDAL/NIPPON STEEL of Premium quality)Ground Floor
374a) APPROVED MAKE /BRAND FOR CEMENT : ULTRATECH, NUVOCO, ACC, JSW (PSC),RAMCO(PSC),DALMIA(PSC),SAGAR(PSC),JK SUPER(PSC),JINDAL PANTHER(PSC)
375APPROVED MAKE / BRANDS ARE TO BE UTILISED STRICTLY DURING EXECUTION OF ABOVE RELATED ITEMS OF WORK Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58489301
AUTHORITY Government Departments
TENDER VALUE 3.33 Crore
LAST DATE 01-12-2026
Authority
Authority Name Orissa State Police Housing And Welfare Corporation Limited
Work Description Tender for Construction Of New Ps Building At Raghunathpalli Ps (Urban Ps), Raurkela.
Basic Detail
Tender No 20/OPHWC/2026-27
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 16 Nov 2026
Submission Date 01 Dec 2026
Open Date 01 Jan 0001
Finance
Tender Value 3.33 Crore
Tender Fee 11800
EMD 3.33 Lakhs
Exemption Available
Document List
01413c22-7346-4b95-a0ce-c0f49f271035.html
BOQ_620033.xls
DTCN8.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 10 days
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

01413c22-7346-4b95-a0ce-c0f49f271035.html

xls

BOQ_620033.xls

pdf

DTCN8.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender