Tender For Construction Of Ph Section Office Madhiapali And Boundary Wall At Kesherkela Pump House, Balangir
Tender Value
64.94 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
64943
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balangir → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ph Section Office Madhiapali And Boundary Wall At Kesherkela Pump House, Balangir
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in all kids of soil including dressing and leavelling the bed upto the required depth and depositing the excaveted materials with all leads & lifts T&P Shoring and shuttering watering if necessary etc. comp |
| 2 | Supplying and filling foundation and plinth with sand watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete (measurement will be taken on finished compacted sec |
| 3 | Cement concrete (1:3:6) using approved quality from approved quarry including lowering laying concrete watering and curing etc. as required levels laid in layers not exceeding(0'-6'') 15 cm thick including cost, conveyance,royalities and taxes of all |
| 4 | Cement Concrete (1:2:4) with 12mm.size & down grade hard granite C.B. chips of approved quality and from approved quarry including watering, lowering laying concrete, compacting with vibrators, curing for 28 days with smooth etc. complete. |
| 5 | R.C.C. work M-25 in grade having a minimum compressive strength (in work test) 250 kg/cm2 in 15cm cubes at 28 days using 12mm. & down grade hard granite C.B. chips of approved quality and from approved quarry including watering, lowering laying concreFooting |
| 6 | Plinth Beam |
| 7 | R.C.C. ColumnsGround floor |
| 8 | 1st Floor |
| 9 | 2nd floor (Head room) |
| 10 | Lintel Ground floor |
| 11 | 1st Floor |
| 12 | 2nd floor (Head room) |
| 13 | Roof Beam Ground floor |
| 14 | 1st Floor |
| 15 | 2nd floor (Head room) |
| 16 | R.C.C. Roof Slab Ground floor |
| 17 | 1st Floor |
| 18 | 2nd floor (Head room) |
| 19 | R.C.C Stair Ground floor |
| 20 | 1st floor |
| 21 | Rigid smooth centering & shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials complete.Footing |
| 22 | Plinth Beam |
| 23 | R.C.C. Columns Ground floor |
| 24 | 1st Floor |
| 25 | 2nd floor (Head room) |
| 26 | Lintel Ground Floor |
| 27 | 1st floor |
| 28 | 2nd floor (Head room) |
| 29 | R.C.C. Roof Beam Ground Floor |
| 30 | 1st Floor |
| 31 | 2nd floor (Head room) |
| 32 | R.C.C. Stair caseGround floor |
| 33 | First floor |
| 34 | R.C.C. Roof SlabGround floor |
| 35 | 1st Floor |
| 36 | 2nd floor (Head room) |
| 37 | Supplying Cutting,bending un- coated HYSD bars,for reinforcement tying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of SYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills Ground floor |
| 38 | 1st Floor |
| 39 | 2nd floor (Head room) |
| 40 | Fly ash bricks masonary incm (1:6) after immersing the bricks 6 hrs. in water before use in Foundation and plinth having C.S. 75kg/cm2 in cluding all cost, carriage, royality etc. complete. |
| 41 | Fly ash bricks masonary in cm (1:6) in Superstructure after immersing the bricks 6 hrs. In water before use in all floors having C.S. 75kg/cm2 in cluding all cost, carriage, royality etc. complete.Ground floor |
| 42 | 1st Floor |
| 43 | 2nd floor (Terrace) |
| 44 | 12 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete.(Outside Wall Surface)Ground floor |
| 45 | 1st Floor |
| 46 | 2nd floor (Terrace) |
| 47 | 16 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete.In Side Wall SurfaceGround floor |
| 48 | 1st Floor |
| 49 | 2nd floor (Terrace) |
| 50 | 6mm thick cement plaster in C.M. [1:4] finished smooth to exposed R.C.C. work with cost of all materials labor etc. complete. Ground floor |
| 51 | 1st Floor |
| 52 | 2nd floor (Head room) |
| 53 | Priming one coat with any approved primer including cost of all labour, materials T & P with taxes, transportation etc all complete.Ground floor |
| 54 | 1st Floor |
| 55 | 2nd floor (Head room) |
| 56 | Finishing wall surface of walls with Acrylicwall putty (Water based ) of approved makeand finished smooth and even surface toreceive painting including cost of scaffoldingstaging charges with cost of all materialstaxes, labour T&P etc complete as per Engineer-in-chargeGround floor |
| 57 | 1st Floor |
| 58 | 2nd floor (Head room) |
| 59 | Finishing wall surface with plastic emulsion paint 2 coat over a coat of primer to the new surfaces of walls with including all cost as per direction of Engineer-in-charge. Ground floor |
| 60 | 1st Floor |
| 61 | 2nd floor (Head room) |
| 62 | Finishing wall surface with weather coat 2 coat over a coat of primer to the new surfaces of walls with including all cost as per direction of Engineer-in-charge. Ground floor |
| 63 | 1st Floor |
| 64 | 2nd floor (Head room) |
| 65 | Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of Tile. Ground floor |
| 66 | 1st Floor |
| 67 | Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes into dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles.Ground floor |
| 68 | 1st Floor |
| 69 | Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost of precast tiles. Ground floor |
| 70 | 1st Floor |
| 71 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with & without cost of precast tiles.Ground floor |
| 72 | 1st Floor |
| 73 | Fixing Chequred Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete |
| 74 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification etc all completed. |
| 75 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Window with top fixed - 60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting sigle glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duty fixed EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set sashes and the system is to be inshtalled at the using anchor fasteners, sillicon rubber sealant, easy glazing/ degilazing at site etc. including cost and conveyance of all materials, acessories, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards,.....(W) |
| 76 | Providing fitting and fixing in position M.S. window Grill with M.S. flat and angles of approved drawing and design including cutting bending the angles and flats to proper sizes welding, chamfering etc. including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries and T&P etc. required for the work complete, as per direction of the Engineer in charge. |
| 77 | Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete as per direction of EIC.Ground floor |
| 78 | 1st Floor |
| 79 | 2nd Floor |
| 80 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete excluding cost of laminated board. |
| 81 | Providing fitting and fixing of PVC door shutters of approved design and specification including all cost, conveyance and taxes of all materilas, all labour, all T&P sundries required for the work as per the direction of the Engineer-in-charge. |
| 82 | Providing fitting, fixing of false celling with Aluminium anodized T section No. 3215 with 2'-0\\" centre to centre, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2'-0\\" x 2'-0\\" suspended from ceilling including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete. |
| 83 | Supplying all materials, labour, T&P for fitting and fixing of all electrical accessories for complete Internal Electrification work including Concealed wiring to light point / fan point / exhaust fan point / call bell point, submain wiring,junction box, provision for ceiling rose,piano type switch, sockets on metal box,RCCB and MCCB arrangements,Distribution Panel,adequate LED lighting arrangements inside and outside,Chemical earthing,Fans etc. all complete as per direction of EIC.(Add 10% for EI work) |
| 84 | Supplying all materials, labour, T&P for water supply, S/I, S/D work including fitting fixing of all PH Fixtures for complete PH work as per direction of EIC.Construction of 20 users septic tank size - ( 3.00m x 1.0m x 1.50m liquid depth ) detailed estimate enclosed (Annexture - \\"B\\" |
| 85 | Construction of OHT of Ground Floor detailed estimate enclosed (Annexture - \\"C\\") |
| 86 | Supply fitting and fixing of 2000 litre capacity Triple Layer white Cylinderical Vertical water storage tanks (ISI Marked) (including cost of 2000 ltr PVC Tank/Triple Layer) |
| 87 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 88 | Supplying all materials ,Labour,T & P and laying in treanches PVC pipe ( 4Kg/cm2) as sewer line and alinging to requisite gradients inside the trench, jointing with solvent cement ,0.08m sand filling in bed , 0.10m C.C ( 1:4:8) using 40 mm size hbg metal in bed , C.C ( 1:2:4 ) with 12 mm chips for 0.05 m in bed & intermediate pillar @ 3.0 Mtr interval including lowering the pipes to the bed of trench, Earthwork in excavation in all kind of soil ,Filling the trenches with excavated earth with watering and ramming and removal of surplus earth, testing of sewer lne etc.complete as per the direction of Er.in charge. i) 110 mm OD PVC pipe SWR pipe(Type B) |
| 89 | Construction of Inspection Chamber of internal size-(0.75mx0.75mx0.45m) Including RCC Cover slab as per P.H. Specification. |
| 90 | Construction of Man hole Chamber of internal size-(0.9mx0.9mx0.9m) Including RCC Cover slab as per P.H. Specification. |
| 91 | Supplying all materials ,Labour,T & P and fixing SWR PVC pipe type B & fitting to wall with nails , clamps and wooden plug as per P.H specification & the direction of Engineer in charge.110 mm SWR PVC pipe type B |
| 92 | 75mm SWR PVC pipe type B |
| 93 | 110mm dia Bend Plain |
| 94 | 110mm dia Tee with Door |
| 95 | 110mm dia Single Y with door |
| 96 | 110mm dia Vent Cowl |
| 97 | 110mm dia P.V.C. Nahani Trap |
| 98 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 99 | Providing and fixing to wall or celing and floor P.V.C pipe ( Sch-80)/6 Kg/cm2 of the following nominal dia including cost of G.I fittings,clampc including making good the damages to wall ,celling & floor etc complete as per specification in ground floor20 mm diameter ( Sch-80) |
| 100 | 25 mm diameter ( Sch-80) |
| 101 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.25mm dia Gun Metal Full Way Valve |
| 102 | Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved reputed make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. E.W.C. with P-trap |
| 103 | 23\\" I.W.C.(Orissa Pan) |
| 104 | 22\\"x 16\\"(550x400) W.H.B |
| 105 | Standard Pedestal for WHB |
| 106 | Urinal Large- half stall urinal flat back 580x380x350 mm(Magnum type)White |
| 107 | 10 litr pvc low level cistern with fittings |
| 108 | 15 mm dia CP Short body Bib cock - |
| 109 | 15 mm dia CP Long body Bib cock |
| 110 | 15mm dia c.p concealed stop cock |
| 111 | 15 mm CP 2 way Bib Cock |
| 112 | Health Foucet with 1.2 mtr Flexible Tube with wall hook |
| 113 | 15 mm dia CP Pillar cock |
| 114 | 15mm dia c.p.angular stop cock |
| 115 | 600mm x 450mm Bevelled Edge Mirrior |
| 116 | 600 mm long Single CP Towel Rail |
| 117 | C.P. Towel Ring round |
| 118 | 600mm long C.P.Shelf with Glass |
| 119 | CP Soap dish holder |
| 120 | 140mm dia CP Over head Shower |
| 121 | CP Arm for Over head Shower |
| 122 | C.P.gratings |
| 123 | 32mmx 1150mm long PVC waste pipe |
| 124 | 15mmx600mm PVC connection pipe |
| 125 | 32mm dia CP waste Coupling |
| 126 | C.P. flange |
| 127 | plastic seat and cover |
| 128 | 100mm size ‘P’ or ‘S’ trap |
| 129 | 25 mm PVC Ball Cock with Rod & Ball Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender