Tender For Provn Of Hardstanding Alongwith Gate And Fencing For Parking Shed At Bldg No E-23 Of Cod Jabalpur Under Ge(E) Jabalpur
Tender Value
33.97 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
67958
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Hardstanding Alongwith Gate And Fencing For Parking Shed At Bldg No E-23 Of Cod Jabalpur Under Ge(E) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, in any type of soil complete all as specified and directed. |
| 2 | M & L for PCC 1:1.5:3 type B-1 20 MM aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding towall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in ridges, roof covering/ clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | M&L for MS framed works conforming to Fe-410 gd 250 as in trusses, purlin, rafters, column through angle section, fixed with and including iron cleats or other connected plates flat iron wind ties etc incl bending of MS section as requried complete all as specified and as directed. |
| 6 | M & L for 100 mm thick Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub-base finished even and fair complete all as specified and directed. |
| 7 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete complete all as specified and directed. |
| 8 | M&L for Moorum/red bajri filling, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.Note: Consolidated thickness shall be measured. |
| 9 | M&L for Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 10 | M&L for 80mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-40 Grade with grey cement and pigment over stone dust filling complete all as directed.Note: Cost of sand will be measured and paid separately |
| 11 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 12 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 13 | Excavation over areas n.exc. 1.5m deep and getting out in any type of soil complete all as specified and directed |
| 14 | Material and Labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, mass concrete etc complete all as specified and as directed. |
| 15 | M&L for reinforced cement concerete M-25 (design mix) grade using 20 mm graded stone aggregate as in foundations, including rafts, footings foundation beams, plinthbeams ,bases for columns etc basement slabs and mass concrete complete all as specified and as directed. |
| 16 | M&L for reinforced cement concerete M-25 (design mix) grade using 20 mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and mass concrete complete all as specified and directed. |
| 17 | Use and waste of formwork to sides of concrete foundation, footings bases of columns, sides and soffits of plinth beams for rough finished flat surfaces complete all as specified and as directed. |
| 18 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batterfor rough finished flat surfaces complete all as specified and as directed. |
| 19 | Material and Labour for TMT bars 10mm dia and over dia cut to length, bent to shape required, including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 9mm dia or securing with clips complete all as specified and as directed. |
| 20 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in soils complete all as specified and as directed. |
| 21 | Removal excavated material to a distance not exceeding 50 M and depositing where directed at a level n. exc. 1.5 m above starting point as in any type of soil complete all as specified and as directed. |
| 22 | Supplying and Fixing of PVC (SWR) single socketed 110 mm bore of pipes as in weep holes of compound wall complete all as specified and as directed |
| 23 | M & L for broken stone broken or boulders of Loose filling with aggregates of gauge 80 to 150 mm as in back side of RCC Retaining Wall gaps complete all as specified and as directed |
| 24 | M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified. |
| 25 | S & F for angle iron Mild steel posts and struts in fencing including cutting to shape as directed drilling holes notching for wire etc mild steel flat iron fillets (for securing wire mesh etc) including necessary drilling bolting including welding etc. and similar work conforming to Fe-290 gde E-165 complete all as specified and directed. |
| 26 | M & L for MS work as in Bands, straps, supports or stays or rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed. |
| 27 | M&L for 8 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 cm complete all as specified & directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directed. |
| 29 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified & directed. |
| 30 | M&L for mild steel work of sections conforming to Fe.290.Gde-E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings inclusive of steel sheeting, running rails & guides and hanging, fastening & fixing complete all as specified & directed. |
| 31 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 32 | M&L for round bars of 8mm dia and over up to and including 10mm dia in nib of fencing post, spacers and binders complete all as specified and directed. |
| 33 | M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | Schedule of credit amount of Rs 0.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender