Tender For Addition/Alteration To Boundary Wall,Main Gate Including Raising Of Main Entrance And Provision Of Ceramic Tiles On Dado Of Compoundwall As Special Item At Bmu And Sound Proofing And Wall Panelling At Officers-In-Charge Cabin And Conferenc
Tender Value
42 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
19 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration To Boundary Wall,Main Gate Including Raising Of Main Entrance And Provision Of Ceramic Tiles On Dado Of Compoundwall As Special Item At Bmu And Sound Proofing And Wall Panelling At Officers-In-Charge Cabin And Conference Hall At Bmu Chhennai Under Ge I Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 2 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 3 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc and getting out in soft/loose soil all as specified and directed. |
| 6 | Material and labour for providing Plain Cement Concrete (1:4:8) type D2 using 40 mm graded coarse aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 7 | Material and labour for High Strength Corrosion Resistant Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 8 | Material and labour for High Strength Corrosion Resistant Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 9 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, coping, shelves including supports, overhangs, etc. also splays between floors and beams complete of flat fair finished surfaces of concrete complete all as specified. |
| 10 | Form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and directed. |
| 11 | Material and labour for providing (RCC) Reinforced cement concrete nominal mix in Type A1 1:1.5:3 using 20 mm graded coarse aggregate for footings, foundation beams/columns etc., complete all as specified and directed. |
| 12 | Material and labour for providing (RCC) Reinforced cement concrete nominal mix in type A1 1:1.5:3 using 20 mm graded aggregate for columns, pillars,beams ,lintel beams and struts etc complete all as specified and directed. |
| 13 | Material and labour for Brick work with fly ash bricks, old size straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type soil complete all as specified and as directed. |
| 15 | Removing excavated soil to a distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.50 Metre above the starting point complete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc and removing rubbish out side MD land etc., complete all as specified and as directed. |
| 17 | Material and labour for complete removal of existing treatment on walls and washing, rubbing down and stoping of distempered and painted surfaces complete all as specified and as directed. |
| 18 | Material and labour for rendering in Cement Mortar 20mm thick in two coats, i.e, in Cement Mortar 1:4, 10mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed.Note: WPC shall be shall be measured and paid separately. |
| 19 | Supply only integrated water proofing componud conforming to IS-2645 |
| 20 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 21 | Supply and Fixing framed work as in steel gates Fe 410-W (GdeE- 250) quality 'A' of angles or other section with gusset plates , rails , braces etc . complete and gates to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging gate fitting complete all as specified and as directed . |
| 22 | Dismantling fencing wire mesh, any type etc., complete all as specified and as directed . |
| 23 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete, brick work masonary etc complete all as specified and as directed . |
| 24 | Fixing only posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work complete all as specified and directed . |
| 25 | Material and Labour for Preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over one coat of red oxide primer complete all as specified and as directed. |
| 26 | Supply and fixing in repairs galvanized , 2 strand , steel bar bed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc., complete all as specified and directed. |
| 27 | Supply and fix of 610mm dia razor plade galvanised punched type concertina coil (50 turns per coil), weight of coil 8.75 Kg ±5%, Strechable to cover a distance of 5 to 7 RM with Central core wire made of high tensile galvanised spring core wire (HTGS) made up of 2.6 mm dia as per IS: 4454, Part-1, Grade-II having minimum galvanizing of 230 – 250 gms per sqm, with a tape of razor sharp barbs strip of 0.5 mm thick and 19 mm width conforming to IS: 513 DD, barbs punched along the length at regular interval of 120 barbs per running meter, crimped with 4 to 5 Nos. of clips per each spire made up of Stainless Steel (SS-304) including fixing of concertina coil in position and secured both sides of 'Y' shape angle iron post with 2.642mm GI binding wire, u-nails / split pin, etc., complete all as specified and as directed. |
| 28 | Material and Labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with Cement mortar 1:6 creed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified and directed. |
| 29 | Material and Labour for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 10mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in cement mortar 1:3 and 10mm thick on fair faces of brick work or concrete surface for fix granite complete all as specified and as directed. |
| 30 | Material and labour for Providing edge moulding (rounding of edges) to 18-20mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 31 | Demolition of Cement Concrete (unreinforced in ground floors and pavings exc 15 cm thickness but above ground floors complete all as specified and as directed. |
| 32 | Material and Labour for Hardcore of Broken stone or boulders of guage exc 63mm but n. exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 33 | Material and Labour for PCC 1:2:4 type B1 Using 20 mm graded aggregate for flooring and in foundations, filling and mass concrete complete all as specified and directed. |
| 34 | Material and Labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed. |
| 35 | Material and Labour for Sand filling under floors or in foundations including watering and consolidation for interlocking tiles complete all as specified and directed. |
| 36 | Material and labour for laying of machine pressed precast concrete interlocking paver block, 100mm thickness, M-50 grade with grey cement and pigments of any shape and size confirming to IS 15658-2006 over compacted sand cushioning all as specified and as directed by the Engineer-in-charge.Note: Sand cushioning shall be measured and paid separately. |
| 37 | Supply and fixing of stainless steel letters of size 30x22 cm made out of 0.5 mm thick stainless steel of grade 304 including necessary elumination etc., complete all as specified and as directed. |
| 38 | Material and Labour for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste if in repairs in patches n exc 5 sqm each, including taking down old and jointing new to old as required complete all as specified and directed. |
| 39 | Material and Labour for10mm thick rendering in CM 1:3 on fair faces of brickwork or concrete surfaces as backing coat for tiles all as specified and directed. |
| 40 | Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 300mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and as directed. |
| 41 | Material and Labour for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as completed as Speciifed and as directed . |
| 42 | Material and Labour for thickness of 25mm lnsulated PVC Wall Lining consisting of PVC Insulated Panels sheet without relevant PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet used instead of plain colour sheet duly fitted into the wall as per specifications and drawing complete all as specified and as directed. |
| 43 | Providing and fixing factory made uPVC white colour Sliding window of area exceeding 2.00 sqm each, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories compelete all as specified and as directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 44 | Supply and Fixing for 4.8 mm thick sheet glass selected quality approved fixed in position in aluminium /iron /wooden frame work including rubber beading and pointing cleats/glazing with oil putty complete all as specified and as directed. |
| 45 | Material and labour of window Zebra blinds pelmet (Product specification - Powder coating pelmet channel ,38mm roller top channel ,Powder coating Triangle and round bottom channel , Smooth operating Zebra mechanism with endless chain And Pelmet plastic cover , Semi Blackout 7.5cm , Composition: 100% polyester , Finished Width: 310 cm , Weight: 165g/m²±5% , Color Fastness: 6-7 Grade , Roll Length: 50 M , Repeat: 7.5cm x 5cm ) complete all as specified and as directed. |
| 46 | Taking down copper/aluminium point wiring (light, fan, socket or power complete) including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, calling bell etc revoing materials to store for taking credit and making good the disturbed surface of wall/ ceiling / floor etc. complete all as specified and as directed. |
| 47 | Taking down carefully submain wiring with aluminium conductor cable 16 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 48 | Taking down carefully submain wiring with aluminium conductor cable 16 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender