Tender For Speical Repair/Replacement Of Ug Cables And Associated Infrastructure In Tech Area At Af Station Barnala Under Ge (Af) Halwara
Tender Value
73.03 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
24 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Speical Repair/Replacement Of Ug Cables And Associated Infrastructure In Tech Area At Af Station Barnala Under Ge (Af) Halwara
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Laying in repairs in trenches/fixed on walls/poles of passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade with and including suitable cable glands and lugs etc complete all as specified and as directed by Engineer in Charge as required of following sizes :- |
| 2 | 400 Sqmm x 3.5 Core |
| 3 | 120 Sqmm x 3.5 Core |
| 4 | 35 Sqmm x 4 Core |
| 5 | 70 Sqmm x 4 Core |
| 6 | 185 Sqmm x 4 Core |
| 7 | Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc complete all as specified and as directed by Engineer-In-Charge. |
| 8 | Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by Engineer-In-Charge. |
| 9 | Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer-In-Charge. |
| 10 | Material & Labour for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable complete all as specified and as directed by Engineer-In-Charge. Note:- Punned thickness shall only be considered for measurement and paymet. |
| 11 | Material & Labour for well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise complete all as specified and as directed by Engineer-In-Charge. |
| 12 | Supply & Fix in repairs GI tubing of protection of cable fixed in wall or laid in trenches complete all as specified and as directed by Engineer-In-Charge suitable for the following size of pipes:- |
| 13 | 100 mm bore |
| 14 | 80 mm bore |
| 15 | Material & Labour for boring of road crossing of size 100 mm dia at suitable depth not more than 1 mtr by using machinery / equipments upto 100 mtrs of length complete without damaging the surface for passing pipes / cables etc with and including removing excavated soil to a distance n exc 50m complete all as specified and as directed by Engineer in Charge.Note : Location of boring holes shall be directed by the Engr-in-Charge as per requirement, nothing extra shall be payable on account of variation in length of crossing of road etc. |
| 16 | Supply and fix cable in repairs route indicator made up of MS angle iron 35x35x6 mm of length not less than 0.9mtr (0.3 mtr below GL) with and including fixed in PCC 1:2:4 of size 0.2x0.2x0.3 mtr and at top with round dial of size 5 inch 9mm thick with embossed lettering of \\"MES LT UG CABLE\\" or \\"MES HT UG CABLE\\" complete all as specified and as directed by Engineer in Charge. Note:- (i) MS Angle iron shall be coated with two coats of syntactic enamel paint of Blue colour over a coat of red oxide primer and the rate quoted by the bidder is deemed to be inclusive of same. (ii) Rate quoated by bidder is deemed to be inclusive of PCC required for the work. |
| 17 | Supply and fix in repairs Bus Bar boxes (Bus bar chamber box ) of LT , 415 Volt, 630 Amps, 4 Way TPN aluminium bus bars with and including fixed on MS angle of size 45X45X5 mm having 0.6 Mtr height, providing the electrical connection for incoming /outgoing cable through proper lugs/thimbles complete all as specified and directed by Engineer in Charge. Note:- (i) MS Angle iron shall be coated with two coats of syntactic enamel paint of Blue colour over a coat of red oxide primer and the rate quoted by the bidder is deemed to be inclusive of same. |
| 18 | Material & Labour in repairs for earthing complete with galavinised steel earth plate electrode 600X600X6mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs. Deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected to Galvanised Earth Strip 32x6mm as earthing lead by means of nuts, bolts, checknuts and washers of galvanised iorn or steel all as shown in electrical plate No.3 of SSR part I and testing complete with and including excavation and GI pipe lightgrade 20mm for watering with GI protection pipe 15mm bore light grade upto7.5 mtrs.GI pipe, light grade 20mm for watering with GI funnel, wire mesh PCC (1:3:6 ) type C1 for earthing pit chamber, CI cover complete all as specified and as directed by Engineer in Charge. Note:- Rate quoated by bidder is deemed to be inclusive of Excavation,PCC, GI pipes,CI cover etc required for the work. |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender