Tender For Repair Maintenance Including Recasting Of Damaged Slabs In Runway, Perimeter Of Security Wall Concertina Coil Barbed Wire At R&O Flt, Sewage Network , Storm Water Drains, Footpath, Approach Path, Barbed Wire, Concertina Coil , Chain Link F
Tender Overview
Project Description
Tender for Repair Maintenance Including Recasting Of Damaged Slabs In Runway, Perimeter Of Security Wall Concertina Coil Barbed Wire At R&O Flt, Sewage Network , Storm Water Drains, Footpath, Approach Path, Barbed Wire, Concertina Coil , Chain Link Fencing Etc At Veer Line, Rezangla Line And Nurshing Line Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 2 | M & L TMT bars 5mm dia and over upto and including 8mm dia in stirrups, spacers and binders |
| 3 | S/F mild steel structural work as in joist, channel, angle or tee sections, fixed independently without connecting plates etc cut to ordinary lengths complete all as specified & direcgted. |
| 4 | M/L preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & directed. |
| 5 | S&F Concertina Coil of 600mm diameter made out of 2.55mm dia high tensile spring steel core wire 240 G/m2 hot dipped zinc coated and 145-160 kg/sqmm tensile strength, each coil having a minium 50 turns (circles) with 25 turns in every 3-meter length, razor length minium 22 mm medium barbs and blade thickness min 0.50 mm with zinc coating of minimum 80-120 g/m2 and 07 rows clipping(175 clips per coil) including handle spikes at both ends of coil (stretchable length of each coil 6 meters) and dipped with corrosion preventive fluid of IS 158 in black colour complete all as specified and directed. |
| 6 | S&F galvnised two strand steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straighting bolts including securing or typing at crossing with and provn of galvnised MS wire staple or steel pins etc as directed |
| 7 | Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description. |
| 8 | Demolition of brick work built in CM incl all quoins arches, pillars etc including removing the same where directed complete all as specified & directed . |
| 9 | M/L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified. |
| 10 | M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 11 | Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified. |
| 12 | Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with two coats of cement base paint of, any colour, complete all as specified & directed. |
| 13 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over old surface. |
| 14 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 15 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 16 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 17 | M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed. |
| 18 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 19 | Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete |
| 20 | Use and waste of formwork to side of RCC/PCC bands in walls etc for rough finished surfaces of concrete complete all as specified and directed. |
| 21 | M&L RCC 1:2:4 Tybe B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete |
| 22 | M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in Columns, pillars etc |
| 23 | M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc |
| 24 | Demolition of cement concrete (reinforced) any description and in any position. |
| 25 | Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level). |
| 26 | Demolition of cement concrete (un-reinforced) concrete of any description and in any position not otherwise all as per specified and directed. |
| 27 | M&L pavement quality concrete (PQC) work in pavement/ hard standing of flexural strength 40 kg/per square centimeter in field using 400 kg of cement per cubic meter, including necessary form work, all as specified and directed by Engr-in-Charge. |
| 28 | Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'B' all as specified |
| 29 | Forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound Grade B |
| 30 | M&L hard core of guage n.exe 63 mm of broken stone or boulders, deposited spread &levelled in layers n.exe 15 cm thick watered & rammed to a true surfaces all as specified and directed. |
| 31 | M&L for cement concrete type C-2, 1:3:6 (using 40 mm graded stone agg) in foundations, filling and mass concrete as in post holes, surface channel, drain etc all as specified and directed. |
| 32 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, make by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compactedbed fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete including all as specified and directed. |
| 33 | Dismantling fencing wire mash any type |
| 34 | M&L for preparation bituminous surfaces of road and marking 1.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paints of approved colour. |
| 35 | Dismantling posts/pillers or struts (Wood, Steel, or RCC) any section, including taking out embedded portion in natural ground and making good disturbed ground. |
| 36 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 37 | Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil. |
| 38 | S&F Mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilled holes,notching for wire etcflats iron fillets (for securing wire mesh etc ) including all necessary drilling,bolting or fiveing etc, and similar work confirming to Fe-290 GdeE -165 all as specified and directed. |
| 39 | Supply only 4 mm dia galvanised iron chain link fencing of size as directed complete all as specified. |
| 40 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. |
| 41 | S&F mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long of diameter of shanks 11 to 15 mm |
| 42 | S/F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0 complete all as specified & directed. |
| 43 | S&F mild steel plain black sheet 1.60 mm th. in steel gate and similar work,cut to size hole punched including round headed screw/welded with steel framing with 40mm lap joint with reveted or welded seams including bending or turning up ,mitred angles etc as required complete all as specified and directed. |
| 44 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete. |
| 45 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in plinth / Hard standing/ pathetic complete all as specified and directed. |
| 46 | M&L machine pressed precast concrete coloured inter locking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade with grey cement and pigment over sand cusion, over compacted earth complete. |
| 47 | M&L sand filling under paver including watering and consolidation |
| 48 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed block coping benching |
| 49 | Plain Cement Concrete Type C1 1:3:6 ( using 20 mm graded aggregte) as in Surface channel and drains. |
| 50 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping of drain including necceesry form work & demolition complete |
| 51 | M&L for providing precast reinforement cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) and set in CM 1:4 as in manhole cover, cover slab for drain & similar articles including demolition of existing reinforced concrete. |
| 52 | S & F RCC hume pipe 450 mm bore class NP-2 laid & jointed complete with collars as specified and as directed |
| 53 | M&L for prepration of new plastered surfaces of wall applying three coat of white wash on plastered surfaces complete all as specified and directed. |
| 54 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness after complete removal of existing treatment on wall surfaces. |
| 55 | Supply only liquid water proofing compound as per manufacture instruction. |
| 56 | M&L for providing chequered cement concrete tile 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment over 20 mm thick screed bed in CM 1:6 in floor |
| 57 | Demolition and breaking of SGSW or RCC drain/Soil pipes jointed in cement mortar and taking out from trenches if required internal diameter 150mm. |
| 58 | M&L PCC 1:3:6 and type C2 using 40mm graded stone agregate for concrete bed to drain pipes including packing under hunching against the sides of pipes after they laid and tested for 150mm dia pipes |
| 59 | M&L Salt-glazed stone ware drain (SWSG) pipe grade 'A' 150 mm dia laid in trenches & jointed in CM 1:1 and tested complete all as specified. |
| 60 | M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate in coping etc, including weathering slightly rounded champers angle forming channels & form work |
| 61 | M&L mild steel TMT bar 8mm dia cut length bent to shape required including cranking bending and binding with MS wire not less than 0.9mm dia or securing clips |
| 62 | S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour all as directed and specified. |
| 63 | S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling |
| 64 | S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete ISI marked |
| 65 | S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour. |
| 66 | Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses. |
| 67 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm screed bed in CM 1:4 complete all as specified and directed. |
| 68 | M&L for Glazed ceramic tiles in vertical surface 350x 450x 7/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 69 | M&L 15 mm thick rendering on fair faces of brick work/ concrete surface in CM (1:4) with applying water proofing compound . (as per manufacturer instruction ) surface finished fair & even complete. (WPC will be paid seperatelly) |
| 70 | M&L for preparation of new plastered wall surfaces and applying two coat of cement based paint of approved colour and shade. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender