Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58489008

Tender For special Repair To Bldg No P-12 Servant Qtr At Offr Mess And Bldg No P-19 (Mt Tech Office And Fol Store) Under Age B/R-I At Ge Gurdaspur.

Issued by Statutory Bodies & Commissions/Committees · Gurdaspur, Punjab
Tender Value
33 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for special Repair To Bldg No P-12 Servant Qtr At Offr Mess And Bldg No P-19 (Mt Tech Office And Fol Store) Under Age B/R-I At Ge Gurdaspur.

BOQ

Name of Work:- Spl repair to bldg No P-12 Servant Qtr at Offr Mess and bldg No P-19 (MT Tech Office and FOL store) under AGE B/R-I at GE Gurdaspur.
Sl. No. Item Description
1Roughing the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/mud etc.and brushing with neat cement slurry @ 3kg/Sqm all as directed by Engineer-in-Charge.
2M&L for cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in roof padding averaging thickness of 50 mm complete all as specified.
3M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.6 Kg per Sqm including cleaning surfaces complete all as specified and directed
4M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) laid on a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m by forced application with butane torch over entire roof area with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in after cleaning surface complete all as specified and directed and all as per manufacturer's instructions.
5M& L for providing PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed
6S&F prepartion of new surface and applying two coats of aluminum paint on above of APP Membrane complete all as specified and directed.
7Supply only integral water proofing compound.
8Demolition of cement concrete of any description and in any position (above/below of ground level) not otherwise specifically provided as in sunken floor, plinth protection, roof kerb, foundation etc. all as specified and directed.
9M&L for cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection thickness of 75mm finishing the surface even and fair with joints to full depth at corners, along the wall and @ 3 meter c/c filled with mastic mortar complete all as speicified and directed
10M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:6 and dismantling of existing tile complete all as specified.
11M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm to 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:6 and dismantling of existing tile complete all as specified.
12M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado and demolition of existing tile complete all as specified.
13Demolition of stone slabs and tiles of any description or thickness in floors, aprons, counter platforms etc, complete all as specified and directed
14M&L for green marble work 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms, stair case and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 20 mm thick screed bed in CM 1:6 complete all as specified and directed (The green marble shall be fixed on one piece no joints shall be allowed).
15S&F machine cut kota stone slab flooring 18-20mm thick over cement screed base 20mm thick in 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (with bees wax polish) including demolition existing complete all as specified and directed by Engineer-in-Charge.
16Demolition of cement concrete (reinforcment) of any description including cutting of reinfrocement of chajjah, fascia, Parapet, projection, shelves etc with necessary scaffolding upto 12m ht complete all as specified and directed by Engr-in charge.
17Use and waste formwork to rough finished surface of concrete flat to soffits of shelves, chajjah, fin etc including supports over hangs complete all as specified and directed
18S&F of TMT bars 6 to 8mm dia bars cut to length bent to shape including cranking binding spiraly, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securing with clips, complete all as specified and directed.
19M&L for RCC in 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in chajjas facia, shelves etc and similar work complete all as specified and directed.
20Taking down cement plaster of any description on brick walls on concrete surfaces etc including racking out joints hacking for key, scrubbing down with water etc from walls and ceiling surfaces of any description complete all as specified and directed.
21M&L for ready mix 12mm thick plaster in cement mortar 1:6 on brick or concrete surfaces of walls, finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
22M&L for rendering 5mm thick on ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
23M&L for rendering 15mm thick in cement mortar 1:4 on brick or concrete surfaces of walls, finished surface even and fair with WPC complete all as specified and directed by Engineer-in-Charge.Note : WPC shall be measured and paid separatel
24M&L for preparation of new plaster surface and applying three coat of white wash on wall complete all as specified and directed.
25M&L for preparation of new plaster surface and applying two coats of Oil bound distemper of wall over a coat of chalk whiteing primer and 2mm thick wall care putty on plastered surface wall complete all as specified and directed.
26M&L for preparation of new plaster surface and applying three coat of white wash on ceiling complete all as specified and directed.
27M&L for preparation of new plaster surface and applying two coats of cement base paint on wall surface complete all as specified and directed.
28M&L for preparation of old plastered surface of walls including rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescence salts and trading oil and greasy spots, making good holes, cracks, etc on existing distempered surfaces and applying two coats of oil bound distemper on wall including 2mm thick wall care putty incl cleanning the floor/ joinery, surfaces, glass panes complete all as specified and directed.
29M&L for preparation of old plastered surface of walls including rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescence salts and trading oil and greasy spots, making good holes, cracks, etc and applying two coats of colour wash incl cleaning the floor/ joinery surfaces, glass pans all as directed by Engr-in-charge
30M&L for preparation of old plastered surfaces of ceiling including rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescence salts and trading oil and greasy spots, making good holes, cracks, etc and applying two coats of white wash on ceiling incl cleaning the floor/ joinery surfaces, glass pans all as directed by Engr-in-charge
31M&L for complete removal of existing treatement including preparation of old plastered surface of walls and applying two coats of cement base paint on wall incl cleanning the floor/ joinery, surfaces, glass pane complete all as specified and directed.
32M&L for preparation of old painted steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
33M&L for preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
34Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats) complete all as specified and directed.
35Taking down chowkats with shutter exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutter for the chowkats) complete all as specified and directed.
36Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.
37S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hings, lock strike, plate etc complete of size 125x60mm all as spd including two coats of painting over a coat of primer and filling with PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) in the frames complete all as specified and directed.
38S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube in opening complete all as specified and directed.
39S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
40S&F 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels on both side complete all as specified and directed.
41S&F 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc , sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and directed.
42S&F aluminium alloy, anodised, sliding door 300 mm long ISI marked bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
43S&F 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate joint through welding/bolt in metal/wooden frame to be carried out complete all as specified and directed.
44S&F aluminium anodized barel tower bolt of extruded section 200mm long ISI marked complete all as specified and directed.
45S&F aluminium alloyed handle fabricated type anodized of size 150mm long ISI marked complete all as specified and directed.
46S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 through bolt or with screw complete all as specified and directed.
47S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 completeincl two coat of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for hold fasts (four Nos for each window). (viii) Painting with one shop coat of zinc chromate primer. Note: Wire cloth, glass shall be measured and paid for separately
48S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for hold fasts, painting with one shop coat of zinc chromate primer incl two coat of painting incl taking down old existing window/ventilator complete all as specified and directed. Note: Glass/ wire cloth shall be measured and paid for separately.
49S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
50S&F 4mm thick sheet glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm each complete all as specifiwd and directed.
51S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putting in squares not exc 0.50 Sqm each incl hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed.
52M&L for preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
53S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed.
54Re-fixing old steel tubing 15mm bore in new or old position including cleaning the same and taking taking up and down complete all as specified and directed
55S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed.
56Re-fixing old steel tubing 20 mm bore in new or old position including cleaning the same and taking taking up and down complete all as specified and directed
57S&F 500 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks and 20mm dia brass float valve with polythene float and flynut complete all as specified and directed.
58S&F 1000 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks and 20mm dia brass float valve with polythene float and flynut complete all as specified and directed.
59S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed.
60S&F in repair stop valves or angel valve cast copper alloy 15mm bore fancy type chromium plated alloy with butterfly handle screwed down for high pressure, screwed on bath ends, fixed with iron pipe etc complete all as specified and directed.
61S&F in repair concealed stop valves cast copper alloy 15mm bore fancy type chromium plated alloy with butterfly handle screwed down for high pressure, screwed on bath ends, fixed with iron pipe etc complete all as specified and directed.
62S&F in repair bib taps cast copper alloy 15mm bore fancy type chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
63S&F in repair pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed.
64S&F in repair brass chromium plated shower rose fancy type 125mm size with swivel joints, including fixing to steel pipe or union with brass CP arm 225mm long, 15mm size complete all as specified and directed.
65S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long with flanges complete all as specified and directed by Engr-in-Charge.
66S&F stainless steel soap dish, oval type standard size fixed to plugs with chromium plated brass screws complete all as specified and directed
67S&F in repair vitreous China wash basin, with pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and coupling complete all as specified and directed.
68S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest, including connection to trap and lime concrete bedding complete all as specified and directed.
69S&F in repairs vitreous china wash down water closet (pedestal pattern) fixing with bolts ,white colour, incl stainless steel L-type jet spray with 1m hose pipe, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. incl seat covercomplete including making good to floor complete all as specified and directed.
70S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern) white with grating, waste coupling and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing arround urinal back in cement, grating and union for discharge pipe incl PTMT waste coupling, waste pipe, urinal spreader complete all as specified and directed.
71S&F in repair PVC low level flushing dual cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed.
72S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
73S&F in repair 600mm X 450mm(min size) beveled edge mirror of selected quality glass fancy type and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
74Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches, if required all as directed by Engineer-in-Charge.
75S&F PVC (SWR) pipes 110mm dia in any length with rubber ring joint fixed to wall/floor complete all as specified and directed.
76S&F in repair PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed.
77S&F in repair PVC (SWR) floor trap 110mm dia, including jointing with solvent cement complete all as specified and directed.
78S&F in repair 110mm bore PVC(SWR) branch pieces (Single T), single (equal or unequal ), ordinary or inverted) or with parallel branches with oval access door complete all as specified and directed.
79S&F in repair PVC vent cowl of size 110mm all as directed by Engineer-in-Charge.
80Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as spcified and directed
81M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
82All as per Srl item No 80 above but except bricks (reused old bricks).
83M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
84M&L for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:2:4) (using 12.5mm graded crushed stone aggregate) and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of Finishes to match with the existing surfaces in at any height complete all as specified. Note: - Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the Contractor.
85S&F in repair cutrain rod 20mm dia of mild steel with PVC coated with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed.
86S&F stainless steel cockroach trap with hole, square size 127 x 127mm complete all as specified and directed.
87S&F in repair 18 mm thick plywood , grade BWR, laminated on both side with decorative choice lamination , Incl fire resistant, moisture resistant type fixed with screws to timber/steel frame work Incl 6mm thick lipping fixed with nails on all sides on cupboard, kitchen cabinets and the like complete all as specified and directed by Engineer-in-Charge.
88S&F aluminium alloyed handle fabricated type anodized of size 100 mm long complete all as specified and directed.
89S&F 75mm size hasp and staple safety type aluminium anodised brass with mild steel hinge pin type including bolt to hinge plate and fixed with screw complete all as specified and directed.
90S&F in repair stack clamps (110 mm pipe) made out of 20x1.5mm galvanised mild steel incl stays, bolt and nuts and securing ends of stays to wall or roof complete all as specified and directed.
91M&L for cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. (to raise level only)
92M&L for 60 mm thick PCC (M-35) factory made (machine pressed ) with gray cement and no pigment interlocking tiles/ paver block of shape/ size as conforming to IS 15658-2006 joints will be filled with fine sand, complete all as specified and as directed by Engr-in-Charge. (Note :-Sand will be paid under relavent item).
93M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
94E/M PORTION Taking down carefully aluminium/ copper point wiring for light, fan, bell, socket of point complete fiitings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed.
95M&L for point wiring with PVC insulated and PVC unsheathed multistranded FRLSH copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing on CI/MS boxes for mounting of accessories like switch sockets and regulators etc. complete all as specified for One light / Fan/ bell point controlled by one way modular switch.
96All as per Srl item No 95 above but one 5 amp socket outlet on independent board.
97All as per Srl item No 95 above but one 5 pin socket outlet 5 amp on same board
98All as per serial item No.95 here-in-before but wiring with 2.5 sqmm FRLSH copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet. Please Enable Macros to View BoQ information
99All as per serial item No.95 here-in-before but wiring with 2.5 sqmm FRLSH copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58489008
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 33 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Bldg No P-12 Servant Qtr At Offr Mess And Bldg No P-19 (Mt Tech Office And Fol Store) Under Age B/R-I At Ge Gurdaspur.
Basic Detail
Tender No GE GSR-87/2026-2027
Bidding Type Tender
Location
City Gurdaspur
State Punjab
Key Dates
Publish Date 11 Nov 2026
Submission Date 05 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 33 Lakhs
Tender Fee 500
EMD 66000
Exemption Not Available
Document List
87TenderDocuments.pdf
b26bf662-ff60-4731-9188-db9f8664130d.html
BOQ_895412.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
pdf

87TenderDocuments.pdf

html

b26bf662-ff60-4731-9188-db9f8664130d.html

xls

BOQ_895412.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender