Tender For Repair/Replacement Of Street Light Poles, Junction Box, Panels, Highmast Light Fittings, Highbay Lights Etc And Other Misc Works At 512 Abws And Cafvd Under Age E/M-Ii In Ge (Central) Khadki.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Street Light Poles, Junction Box, Panels, Highmast Light Fittings, Highbay Lights Etc And Other Misc Works At 512 Abws And Cafvd Under Age E/M-Ii In Ge (Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old cable and supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts including cable gland, lugs, thimbles, clamps etc of suitable sizes for connection complete all as specified and directed of following size:- |
| 2 | 10 Sqmm 2 core |
| 3 | 10 Sqmm 4 core |
| 4 | 16 Sqmm 4 core |
| 5 | 25 Sqmm 4 core |
| 6 | 35 Sqmm 3.5 core |
| 7 | 50 Sqmm 3.5 core |
| 8 | 70 Sqmm 3.5 core Note for Item No 1.01 to 1.07 :- (i) During earth work for laying of cable, any damage to the existing services will be made serviceable without any extra cost within 24 hrs. (ii) Old unsv cable amy not be retrieved at some places and hence credit material under sch of credit not considered for complete qty.(iii) Contractor should visit the site before quoting the rate for understanding the scope of work. |
| 9 | Supply and fix tubing 'light grade' galvanised iron with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads complete including taking down old unserviceable GI pipe all as specified and directed of the following bores :- |
| 10 | 80 mm bore |
| 11 | 50 mm bore |
| 12 | 40 mm bore |
| 13 | Material and labour for boring through existing bituminous road /PCC/floor/Stone block Tank road along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the adjacent path /road if damaged to match with the original finishes complete all as specified and as directed. NOTE :- Contractor should visit the site before quoting the rate & GI Pipe will be measured and paid seperately in respective item. |
| 14 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in hard / dense soil complete all as specified and as directed. |
| 15 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/disintegrated rock complete all as specified and as directed. |
| 16 | Material and labour for sand/fine dust cushioning to under ground cable providing with a layer of and 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and as directed.NOTE :- Punning thickness of 18 cm will be measured for payment |
| 17 | Supplying and laying precast, PCC LT cable cover, class LV, type flat , size 250mm x 150mm x 40mm complete for protection of underground cable all as specified and as directed. |
| 18 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and as directed |
| 19 | Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed. |
| 20 | Supply and errect in true vertical position steel tubular swaged poles in replacement complete with MS base plate of 6mm of size 300mm X300mm finial taper plug,pole cap,bolts,nuts and washers screws,pole made out of ERW MS tubing as per IS-1161 and pole shall be as per IS-2713 Part II type 410 SP-31 (9.00 Mtrs Long) complete including one coat of red oxide zinc chrome primer and two coats of Aluminium paint for exposed surfaces and two coats of black bitumenous paint for portion embedded in concrete complete including dismantling old pole and removing from site all as specified and as directed NOTE :- Excavation and earth work ,PCC in foundation /plinth block/coping shall be measured and paid for separately |
| 21 | Supply and errect in true vertical position LT electric pole, GI Octogonal Pole, hot deep galvanised, with base plate of 220x220x12 mm thick, 09 Mtrs Long, top dia 70mm, bottom dia- 135mm, thickness of sheet- 3 mm, including Single arm GI bracket, inbuilt cable junction box with door, connection plate, MCB 6A, duly connecting existing LT UG cable, cable lugs, work included necessary earth work and RCC foundation as per manifacturers recommendation complete all as specified and as directed . Make: Bajaj / Crompton or as approved by GENOTE :- Rates for Earth work, PCC foundation required as per manufacturer recommendation included in the unit rate. |
| 22 | Supply and errect in true vertical position LT electric pole, Octogonal Pole, hot deep galvanised, with base plate of 220x220x12 mm thick, 07 Mtrs Long, top dia 70mm, bottom dia- 135mm, thickness of sheet- 3 mm, including Single arm GI bracket, inbuilt cable junction box with door, connection plate, MCB 6A, duly connecting existing LT UG cable, cable lugs, work included necessary earth work and RCC foundation as per manifacturers recommendation complete all as specified and as directed . Make: Bajaj / Crompton or as approved by GENOTE :- Earth work, PCC foundation as per manufacturer recommendation included in the unit rate. |
| 23 | Supply and fix GI pipe Ring bracket of suitable light for GI octagonal pole complete all as specified and as directed. |
| 24 | Material and labour for cement concrete 1 : 4 : 8 type D-2 using 40 mm graded aggregate as in foundation for pole including necessary form work all as specified and directed |
| 25 | Material and labour for cement concrete 1 : 2 : 4 type B-1 using 20 mm graded aggregate as copping of pole , filling and mass concrete necessary form work all as specified and as directed. |
| 26 | Material and labour for filling and spreading stone aggregate using 20 mm grade trap stone aggregate around 4 pole , 2 pole structure and transformer etc all as specified and as directed. |
| 27 | Material and labour for Dismantling of ACSR conductor HT/LT on any type of pole complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply, stringing, streching and binding in replacement with insulator, ACSR conductor (Weasel /ferret/Mink) on HT/LT Poles including providing of necessary jumpers, connecting all existing incoming and out going connections, trimming of trees approximately 2 mtr around conductor etc all as specified and as directed. |
| 29 | Lopping / prooning of tree branches upto the extend to obtain clearance all around the LT over head lines / HT over head lines conductor upto 2 mtr from farthest conductor on pole including removing of cut branches and cleaning of site complete all as directed.NOTE :-(a). The trees branches etc will be removed from site and stack as directed and will not be carried away by the contractor. (b). Prooning of all tree branches in per Span in HT/ LT OH Line shall be measured as one Job. (c). Contractor will employ sufficient labour to complete the job with in time as directed. (d). Contractor will be responsible for any type of mis-happening / accident while prooning the trees. (e). Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply . (f). The contractor will provide proper tools and safety devices to his staff for prooning of trees. |
| 30 | Material and labour in replacement Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts,bolts,washers, welding , bending cold or hot, drilling holes for bolts,in any shape or sizes as indicated or directed and inclusive of one primer coat and two coats of alluminium paint complete all as specified and as directed. |
| 31 | Supply and fix pin type porcelain , vitreous white, brown or green insulator including galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia wahsers, bolts etc as working pressure 1100 volts complete all as specified and as directed. |
| 32 | Supply and fix shackle type porcelain , vitreous white, brown or green insulator including galvanised mild steel straps, wahsers, insulator bolts, wahsers and nuts, as working pressure 1100 volts height in 100 mm maximum dia 115 mm section of straps in 31 x 5 mm dia of bolts 14 mm complete all as specified and as directed. |
| 33 | Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 63 to 100 Amps breaking capacity 16KA Icu=Ics=100%.including spreader links and seperaters incl addn altrn in exixsting panel complete all as directed at site complete all as specified and as directed. |
| 34 | Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 125 Amps breaking capacity 16 KA. Icu=Ics=100% including spreader links and seperaters incl addn altrn in exixsting panel complete all as directed at site complete all as specified and as directed. |
| 35 | Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 200 Amps breaking capacity 36 KA. Icu=Ics=100% including spreader links and seperaters incl addn altrn in exixsting panel complete all as directed at site complete all as specified and as directed. |
| 36 | Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 250 Amps breaking capacity 36 KA. Icu=Ics=100% including spreader links and seperaters incl addn altrn in exixsting panel complete all as directed at site complete all as specified and as directed. |
| 37 | Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 400 Amps breaking capacity 36 KA. Icu=Ics=100% including spreader links and seperaters incl addn altrn in exixsting panel complete all as directed at site complete all as specified and as directed. |
| 38 | Material and labour for straight through (Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm including dismantling the old burnt cable joint termination complete all as specified and as directed. |
| 39 | Material and labour for straight through (Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm including dismantling the old burnt cable joint termination complete all as specified and as directed. |
| 40 | Supply and fixing street light mounting bracket, made out of Light grade GI Tubing 32 mm bore , bend into shape inner angle not less tan 120° and over all length not less tan 1.0 Mtr including suitable size clamps made from not less than 25x3 mm ms streep , Nut, bolts 12 mm dia with washers complete fixing arrangement all as specified and as directed. . |
| 41 | Supply and fix in replacement LED Street light 90W 230 V, 50 HZ, suitable for operation over voltage range of 140 V to 270 V, duly housed in pressure die cast aluminium housing, compresing of LED with individual optical lens, electronic driver with THD <10%, efficiency >85% and PF more than 0.90, confirming to IP65, rendering color index of 75 with cool day light output including making electrical connection to the fitting with Suitable size of service wire all as specified and as directed. |
| 42 | Supply and fix replacement LED Flood light 120W 230 V, 50 HZ, suitable for operation over voltage range of 140 V to 270 V, duly housed in pressure die cast aluminium housing, compresing of LED with individual optical lens, electronic driver with THD <10%, efficiency >85% and PF more than 0.90, confirming to IP65, rendering color index of 75 with cool day light output including making electrical connection to the fitting with Suitable size of service wire complete all as specified and as directed. |
| 43 | Supply & Fix replacement LED Flood light 200W 230 V, 50 HZ, suitable for operation over voltage range of 140 V to 270 V, duly housed in pressure die cast aluminium housing, compresing of LED with individual optical lens, electronic driver with THD <10%, efficiency >85% and PF more than 0.90, confirming to IP65, rendering color index of 75 with cool day light output including making electrical connection to the fitting with Suitable size of service wire all as specified and as directed. Please Enable Macros to View BoQ information |
| 44 | Supply & Fix replacement LED Flood light 200W 230 V, 50 HZ, suitable for operation over voltage range of 140 V to 270 V, duly housed in pressure die cast aluminium housing, compresing of LED with individual optical lens, electronic driver with THD <10%, efficiency >85% and PF more than 0.90, confirming to IP65, rendering color index of 75 with cool day light output including making electrical connection to the fitting with Suitable size of service wire all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender