Tender For Certain Repairs To Office Accn Of Dpdo Hoshiarpur Under Age B/R-Ii Of Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_798107_1)
Tender Value
16.76 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
11 days left
EMD
33532
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Office Accn Of Dpdo Hoshiarpur Under Age B/R-Ii Of Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_798107_1)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame not exc. 15 sq m each with shutters (without taking off shutters from the fames), complete all as directed by Engr-in-charge. |
| 2 | Taking down chowkats or frame exc. 1.5 sq on but in exc 4 sqm each with shutters (without taking off shutters from the fames), complete all as directed by Engr-in-charge. |
| 3 | Taking down cement plaster or cement line plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc any description, complete all as directed by Engr-in-charge. |
| 4 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not becking), removing serviceable tiles to store and rubbish off the premises, complete all as directed by Engr-in-charge. |
| 5 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) and removing surplus spoil 5 fout of Defence Land where directed at a level not exc 1.5 m above the starting point, complete all as directed by Engr-in-charge. |
| 6 | M&L powder coated aluminium door shutter having 150mm x 44mm x 2.85 mm thick bottom rail, rail, 100mm x44mm x3 mm thick stile and top rait including necessary fitting joinery cleat, glazing packing snao beading 10 mm x 10 mm, 150 mm x 44mm x 2.85mm thick middle aluminium handle 200 mm long (02 Nos), 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size Aluminium tower bolt and Aluminium body hydraulically door closer, designation No-3, universal type, weight between 61 to 80 kg etc inlcuding frame of section 100 mm x 44 mm x3 mm and door shutter, bottom portion covered with 9mm thick prefaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to Aluminium frame work and top portion cavered with 5.00 mm thick float glass and pattern, one mortice in lock with shutter and fixing, complete all as specified and as directed. |
| 7 | M&L powder coated aluminium window/ ventilator shutter side hung having 75 mm x 44 min x 2.85 mm thick stiles bottom rail and top rail including necessary tting joinery cleat glasing packing snap beading 10 mm x 10 mm, 2 nos of aluminium handle 150 mm size 2 mos of chromium plated butt hinges 75 mm size and 2 nos of 100 mm long Aluminium tower bolt etc including frame of section 100 mm x 44 mm x 3 mm and including 5.00 mm thick floạt glass and fixing, complete all as specified and as directed. |
| 8 | S&F 35mm thick ilnd class hard wood plain framed factory made paneled shutters with (2 panel) of 9mm BWP commercial ply of 12mm & veneered particle board with commercial veneering on both faces. The size of rest and stile as per IS. 1003 (Part-1) kin seasoned and Sqm chemically treated, complete all as specified and as directed. |
| 9 | S&F 250mm long Aluminium alloy, anodised sliding door bolts with hasp, staple (bolt type) and fing clips of sheet, cast or extruded sections and furing bolts and sliding bolts of extruded sections or cast aluminiurn alloy fixed, complete all as specified and as directed. |
| 10 | S&Fing 100mm size butt hinges medium weight cold rolled mild steel, complete all as specified and as directed. |
| 11 | S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt, complete all as specified and as directed. |
| 12 | S&F 150 mm mild steel pressed handles oval type, stove enamelled black, complete all as specified and as directed. |
| 13 | Supplying and fixing steel windows 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated comprises of glazed sutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf conisting two Nos sash bar of 'T' section 20 mm x 3 ram complete welded to frame with one vertical mullion of EWR bot Tsection of size 60 mm x 25 mm and 1.25 mm thick including Curangs holes and making good dismantled portion in PCC (1:2:4) type B1 four Nos for each window including following fittings welded to failed shutter (a) Holdfasts 150 mm long 12mm x 3 mm made to shape-4 Nos per window (b) Handle of Z sez 20 mm x 25 mm, 100 mm long - 1 nos per leaf. (c) MS tower bolt 150 mm long-2. Nos per ieal.(d) 'Z' sec 20 mm x 25mm, 100 Jang stopper-01 Nos per leaf. (e) Cleat 55mm long af hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 Nos per leaf (f) MS pintal hinges of size 75 mm x 12 mm-2 Nos per leaf. (g) fabriction and fixing arrangement, complete all as specified and as directed. Note-Grill/guard war, glass pane shall be measured and Paid saperately. |
| 14 | Ditto all as per srl item No. 13 above, but in gauged shutters without sash bars, complete all as specified and as directed. |
| 15 | Ditto all as per srl item No. 13 above, but in ventilators fixed type, complete all as specified and as directed. |
| 16 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forget into spikes: framed guard bars barallel iron doors and similar work conforming to Fe 290 Gde-E-165, complete all as specified and as directed. |
| 17 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks, complete all as specified and as directed. |
| 18 | M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane, complete all as specified and as directed. |
| 19 | S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet and edges will be painted to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-Il, complete all as specified and as directed. |
| 20 | S& F Factory Made Solid PVC Moulded Door Shutters with particle board core, 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front Face & 2mm Prelam PVC sheet on back face all as per specification & drawing, complete all as specified and as directed. |
| 21 | S&F100mm stainless steel butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, stainless steel screws, complete all as specified and as directed. |
| 22 | S&F125mm size brass handles, cast type, polished bright, complete all as specified and as directed. |
| 23 | S&F 250mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (boll type) and fixing boll with rolled of drawn brass bofts and fixed, complete all as specified and as directed. |
| 24 | S&F 200mm size brass barrel tower bolt, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and as directed. |
| 25 | S&F 15mm bore galvanized iron tubes medium grade with ell fitting and fixed complete to walls, incl taking down existing pipes lald in floor/wall, complete all as specified and as directed. |
| 26 | S&F 20mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, incl taking down existing pipes laid in floor/wall, complete all as specified and as directed. |
| 27 | S&F 15mm angle stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in repair. |
| 28 | S&Fin repair Bib tap chromium plated, cast copper alicy suitable for 15mm bore iron pipe with Jong body fancy type, complete all as specified and as directed. |
| 29 | S&F 15mm dien, CP Pittar tap brass, fancy type chromium plated, screwed down high pressure with long screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and as directed. |
| 30 | S&F in repair for Vitreous china wash bend basin, while ftat, size 550 x400 mm ind brackets waste coupting and waste pipe, complete all as specified and as directed. |
| 31 | S&F in repair squatting pan WC orissa pattern size, 580 x 440 mm white with integral foor rest with P or S trap incd provn of time concrete bedding inci breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor, complete all as specified and as directed. |
| 32 | S&F in repairs Vitreous china wash down water closet pan (padestal pattern), white (excluding fixing bolts flushing cistem) incl seat cover and flushung pipe for pedestal pan, including all joints, complete all as specified and as directed. |
| 33 | S & F in repair seat cover for water closet pedestal pattern, complete all as specified and as directed. |
| 34 | S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 tr capacity including brakets fixed in repairs, complete all as specified and as directed. |
| 35 | S& in repair PVC connection fiber, reinforced 45cm long with brass check hut and PVC washers at both ends complete fixed in repair, complete all as specified and as directed. |
| 36 | S&Fin repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 37 | S&F in repair Chromium plagea jet for EWC 600mm long tube superior quality, complete all as specified and as directed. |
| 38 | S&F Soap dish stainless steel chromium plated fixed with brass screws and rawl plug, complete all as specified and as directed. |
| 39 | S&F brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between CP flanges, complete all as specified and as directed. |
| 40 | S&F Toilet Roll Holder, complete all as specified and as directed. |
| 41 | S&F in repair vitreous china Urinal, flat back white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing uninał to plugs with and including 60mm long brass secews, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupline, and union for discharge pipe, waste pipe spreader etc, size of urinal 59cm x 39 cm x 37.5 cm, complete all as specified and as directed. |
| 42 | M&L for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement Diameter of outlet in 75 mm), complete all as specified and as directed. including taking out damaged floor trap in any type and position, complete all as specified and as directed. |
| 43 | S&F in repair 600mm x 450mm looking mirror of selected quality 4 mm thick glass mounted on 6 mm thick commercial plywood 3 & PVC frame moulding all around and fixed to wooden plug with chromium plated brass screws and cup washers including fixing arrangement as per approved by Engineer-in-Charge |
| 44 | S & F in repair 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) Triple layer hosted and fixed in position inci 20mm for ball valve PVC high pressure, with polythene float and fly riut, complete all as specified and as directed. |
| 45 | Demolition and braking up dram pipes AC/PVC pipe in event n.exc 150 mm dia including all fittings, complete all as directed by Engr-in-charge. |
| 46 | S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls and floors, complete all as specified and as directed. |
| 47 | Ditto all as per srl item no 46 above but 75 mm dia, complete all as specified and as directed. |
| 48 | PVC (SWR) bends 110 mm, complete all as specified and as directed. |
| 49 | Ditto all as per srl item no 48 above, but 75 mm, complete all as specified and as directed. |
| 50 | M&L 15mm thick cement plaster in cement mortar 1.6 on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and as directed. |
| 51 | M&L 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface with water proofing compound finished even and fair without using extra cement, complete all as specified and as directed. |
| 52 | M&L for prepration of new plaster surfaces of walls and applying two coats of oil bound distemper including a coat of primer on plastered surfaces over 2mm thick two coat of Birla White Putty, complete all as specified and as directed. |
| 53 | M&L for preparation of oid decorated/treated surface of walls including removing existing treatment by rubbing, scrapping, washing and applying two coats of bil bound distemper including a coat of wall care putty on wall, complete all as specified and as directed. |
| 54 | M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint, complete all as specified and as directed.by Engr-in-charge |
| 55 | M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of Acrylic exterior emultion paint(wheather coat) over a coat of wall primer (X2) complete all as per manufacturer instruction and as specified and directed by Engr-in-Charge. |
| 56 | M&L for preparation of old painted surface and applying one coat of white wash on old surfaces of ceiling including preparation of ceiling surfaces, complete all as specified and as directed. |
| 57 | M&t for preparation of new steel surfaces of any descrption over 10cm width or girth and applied two coat synthetic enamel paint over one coat of red oxidezinc chrome primer complete as as specified and directed by Eng: chage |
| 58 | Preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 59 | M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 60 | M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic ename! paint, complete all as specified and as directed. |
| 61 | M&L for Virified Ceramic tiles(premium quality) light shade 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm in flonrs etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15tam thick cement screed bedding layer in cement mortar 1:6, complete all as specified and as directed. |
| 62 | All as per item above but on vertical surfaces such as skirting etc over and including 10 mm thick cernent plaster finished even and rough to receive tiles in Cerment mortar (1:4), complete all as specified and as directed. |
| 63 | M&L for non skid joint free ceramic coloured tiles(premium quality) of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm and 7-8 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1.6 for laying floor finishes, complete all as specified and as directed. |
| 64 | M&L for coloured glazed ceramic tiles of size 300X450X7mm thick fixed with neat cement slurry in vertical surface to wall and pointed in white/coloured cement to match over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 65 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good by pointing in cernent mortar (1:2) using admixture of pigment to match with shade of granite over and including 10mm thick rendering in (1:4), complete all as specified and as directed. and |
| 66 | M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection/surface channels finishing the surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 67 | M&L for stainless steel pipe 25 mm dia curtain road fixed in the MS hooks, and finials/side brackets (both side)/wall to wall, shade, complete all as specified and as directed. |
| 68 | Demolition of reinforced cement concrete in ground floors and paving n. exc 15 cm thickness (reinforcement to cut as required to facilitate demolition), complete all as specified and as directed. |
| 69 | M&L for reinfored cement concrete type B-1 1:2:4 (20 mm graded aggregate) slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 70 | M&L for MS TMT bars 10 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incd MS wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed. |
| 71 | M&L for form work to soffits of suspended slabs such roof slabs, floor slabs, shelves, landings and similar work, not exceeding 200mm 1 thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc., complete all as specified and as directed. |
| 72 | Surface excavation in exc 30cm deep and averaging 15cm deep in soft/loose soil, complete all as specified and as directed. |
| 73 | M&L for broken stone or boulder hard core of gauge n exc. 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface, complete all as specified and as directed. |
| 74 | M&L Cement concrete type D-2. 1:4:8( 40 mm grade agg) 100 mm thick as in sub base of flooring, complete all as specified and as directed. |
| 75 | M & L 25mm sand cushion, filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 76 | M & L for laying 60 mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS-15656-2006 of M-35 Grade with grey cement and no pigment, complete all as specified and as directed. |
| 77 | M&L PCC (1:2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles, complete all as specified and as directed. |
| 78 | M&L Cutting holes into or through brick walls built in cement mortar and making good in in exc 150 sq cm cement morter 1.3 or cement concrete 1:2:4 Type B-1 as of depth required, complete all as specified and as directed. |
| 79 | S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls and floors including packing of any gaps by cement mortar (1:3), complete all as specified and as directed. |
| 80 | Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved, complete all as specified and as directed. |
| 81 | M&L for point wiring with modular accessories for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes(1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble, complete all as specified and as directed. |
| 82 | Ditto all as per srl item No. 81.00 above but for one fan point controlled by one switch, complete all as specified and as directed. |
| 83 | Ditto all as per srl item No. 81.00 above but for one socket outlet 5 Amps on independent board, complete all as specified and as directed. |
| 84 | Ditto all as per srl item No. 81.00 above but for one socket outlet 5 Amps on the same board controlled by one switch, complete all as specified and as directed. |
| 85 | Ditto all as per srl item No. 81.00 above but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board incl Modular cover plate and suitable metal sunken box of suitable modules including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories, complete all as specified and as directed. |
| 86 | S&F switch piano flush type, 5 Amps, 240 Volt AC single pole, one way, complete all as specified and as directed. |
| 87 | S&F switch piano flush type, 15 Amps, 240 Volt AC single pole, one way, complete all as specified and as directed. |
| 88 | S&F socket out let 5 Amp, 5 pin, 2-in-1 flush type, complete all as specified and as directed. |
| 89 | S&F socket out multi purpose 2 in 1, 5/6 pin, 5 & 15 amps, flush type, complete all as specified and as directed. |
| 90 | S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal, complete all as specified and as directed. |
| 91 | S&Fin replacement LED tube light fitting polycarbonate housing 1 x 20 Watt, appx 4 feet long, with decorative box linear, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and as directed. |
| 92 | S&Fenergy efficient LED Bldg security light fitting of 35W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and as directed. |
| 93 | S&F MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/Acti 9 series of Schneider/Optipro of Indoasian or equivalent in Havells/legrand/Siemens/Hager., complete all as specified and as directed. |
| 94 | S&F(concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 12 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty, complete all as specified and as directed.Note :- MCB/Isolator etc shall be measured and paid separately. |
| 95 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with matching colour back plate, complete all as specified and as directed. |
| 96 | Supply and fiixing LED retrofit lamp 9 W, 6500K, 220-240V with base cap B-22, complete all as specified and as directed. |
| 97 | S&F MCB SPN 63 Amps 240 V, 10 KA, B curve as per, complete all as specified and as directed. |
| 98 | S&F exhaust fan, made of strudy engineering plastic body AC single phase, 230V of size 250 mm size sweep with, blades and frame and louvers, copper winding, complete all as specified and as directed. |
| 99 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 amp 240 V 10 KA, complete all as specified and as directed. |
| 100 | M&L in replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm complete with any type of civil work involved to make good disturbed surfaces, complete all as specified and as directed.Note : Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit |
| 101 | M&L for Cutting holes for exhaust fan of size 250mm dia sweep in bricks wall built in cement mortar or cement lime mortar and stone walls built inline mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and as directed. |
| 102 | M&L in replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm complete with any type of civil work involved to make good disturbed surfaces, complete all as specified and as directed.Note : Two run of 6 sqmm wire and one run of 6 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit |
| 103 | M&L for Earthing complete in replacement with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved., complete all as specified and as directed and testing on completion.Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender