Tender For Provn Of Chain Link Fencing For Smq Area (Ph-I) At Af Stn Tezpur
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Chain Link Fencing For Smq Area (Ph-I) At Af Stn Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Site clerance to include clearing away all grass, vegetation, saplings shrubs, brushwood, undergrowth, roots and trees n exc 30 cm girth (measured on 1 metre above ground level) and removing rubbish upto a distence of 50 meters outside the periphery of the area under clearance, complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) in soft/loose soil, each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 3 | M&L for Cement concrete (1:4:8) type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed. |
| 4 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 5 | Supply only chain link fencing of size and type as approved by the Engineer in Charge, complete all as specified and as directed. |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire, complete all as specified and directed. |
| 7 | Supply & fix 10mm dia mild steel round bars as stiffener to chain link fencing including necessary cutting bending etc. conforming to Grade-l, IS 432 (Part-I), complete all as specified and as directed. |
| 8 | S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm, complete all as specified and directed. |
| 9 | Supply & Fix for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290, Grade E-165, complete all as specified and directed. |
| 10 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 11 | M&L for preparation of new steel surfaces n.exc 10cm width or girth when unconnected with other painting or when painted in different paint and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender