Tender For Provn Of Fast Erectable Modular Structures (Fems) At Tru Op Location At Chushot Palam Under Ge (Af) Leh
Tender Value
1.44 Crore
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Fast Erectable Modular Structures (Fems) At Tru Op Location At Chushot Palam Under Ge (Af) Leh
BOQ
| Sl. No. | Item Description |
| 1 | Design, Supply and Erection of Prefabricated High Altitude Modular Shelter of size 14.00 Mtr X 14.00 Mtr X 3.00 Mtr as per arch line drawing. The structural design all including of footing and foundation needs to be prepared and also to be vetted from IIT by the contractor. Certificate from IIT needs to be in conjunction with codal provns and submitted by the contractor before execution of the work. The work consists of manufacture, supply and transportation & commissioning of High Altitude modular prefab/containerized shelter of size 14.00 Mtr x 14.00 Mtr x 3.00 Mtr up to clear internal height of 2.80 Mtr. Structure frame system design with structural steel conforming to IS Code and design as per IS Codal Provns with std worst combination of load as per IS Code prevailing in various OP location at Leh. The structural frame system should support the structure. The vetted drawing should also provide details of Foundation, MS SHS Column details (min 132x132x4.8 mm), Truss details, Structural Joints and all fixing details required for execution. The work will consist of all associated works like Civil Pedestal(Exavation for foundation, removal/refilling of soil, Reinforcement/RCC work, formwork) and Freight up to site. Preliminary drawing specifications are provided in arch line drg. Final structural drawing, architectural drawing and \\"Good for Construction\\" drawing will be submitted by contractor after conclusion of contract duly vetted by IIT. The contractor shall supply & commission the items as mentioned in the specifications at the locations provided therein in accordance with the work order placed complete in all respects as directed by the Engineer-In-Charge as per the following configuration.Design criteria: The structural shall be designed in accordance with relevant IS Provns/NBC code/ extant government guidelines suitable for various OP location. However, some of design criteria are listed as under:(a) Seismic Co-efficient: As per Seismic Zone IV as per IS 875 Part -1 - 1987.(b) Snow load : Min 1.0 Mtr standing on roof as per IS Codal Provns for various OP locations.(c) Wind load : Equivalent to wind speed of 55 mtrs/sec as per IS-875 Part 3 -1988 or as per Relevant IS Provns.(d) Roof slope : 18 Degree or as per design requirement.(e) External Temperature Range : (-) 35 degree to (+) 25 degree.(f) Water absorption/Penetration: Nil & adequate sealing material be provided through include Silicon Sealing Gun.(g) Fire resistant (Walls and ceiling): Fire resistant & should not emit toxic fumes.(h) Ease of construction : Shelters should be modular in design. Ready to ship and use shelter.(j) Design load: As per IS 875/Relevant IS provn.Note: All Drawings mentioned above will be vetted by IIT. |
| 2 | (k) Imposed Loads – As per IS 875 Part 2 1987 for sloping roof(l) Design of fdn : as per the structure vetted by the IIT.(m) The design of the structure shall be carried out on 10 Ton/m² of soil bearing capacity (SBC). (n) Transportation: The rate shall include transportation charges for a distance of approximately 20 to 30 km from Leh to the OP location site. |
| 3 | Design Data.(a) Length : 14.00 M. (Outer to outer)(b) Width : 14.00 M. (Outer to outer)(c) Shelter Clear Height upto false ceiling :2.80 from FFL. |
| 4 | Material. All material required for the manufacturing of shelters will be new and will comply with relevant IS as applicable and those given succeeding para. The building shall be considered and manufactured as per IS: 875 for structural design. Structural steel : Hollow sections conforming to IS-4923 (SHS/RHS), IS-1161 (CHS) and both conforming to \\"Grade Yst 310\\" and plates as per IS-2062 (Grade E250). All tube ends shall be - welded/capped. Bolts of Grade 8.8 as per IS-1367 shall be used unless noted and specified elsewhere in the tender documents. The material should provide insulation against extreme cold weather conditions. |
| 5 | Workman Ship(a) Connection: Welded connection/ CRS Nut & Bolt will be provided unless otherwise specified in the drawings. The welded connections will be conformed to IS 806-1968.(b) Fabrication: The general provisions in section 11 of IS 800 of 1984 will apply to all types of steel being used for fabrication. Structural steel : Hollow sections conforming to IS-4923 (SHS/RHS), IS-1161 (CHS) and both conforming to \\"Grade Yst 310\\" and plates as per IS-2062 (Grade E250). All tube ends shall be wealed - welded/capped and will be of Make: TATA, Jindal, SAIL, APL Apollo, Swastik or equivalent make Structural Members shall be as per the schedule of structure. All steel members will be provided with 2 coats of red oxide zinc chromate primer & 2 coats of enamel paint as per approved colour scheme from GE (AF) Leh before supply. Please Enable Macros to View BoQ information |
| 6 | Workman Ship(a) Connection: Welded connection/ CRS Nut & Bolt will be provided unless otherwise specified in the drawings. The welded connections will be conformed to IS 806-1968.(b) Fabrication: The general provisions in section 11 of IS 800 of 1984 will apply to all types of steel being used for fabrication. Structural steel : Hollow sections conforming to IS-4923 (SHS/RHS), IS-1161 (CHS) and both conforming to \\"Grade Yst 310\\" and plates as per IS-2062 (Grade E250). All tube ends shall be wealed - welded/capped and will be of Make: TATA, Jindal, SAIL, APL Apollo, Swastik or equivalent make Structural Members shall be as per the schedule of structure. All steel members will be provided with 2 coats of red oxide zinc chromate primer & 2 coats of enamel paint as per approved colour scheme from GE (AF) Leh before supply. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender