Tender For Special Special Repair To Entrance Gate At Snc (O) Mess, Addition / Alteration Of Structural Glazing In Stair Complex Of Family Wing (P-159 C) At Inhs Sanjivani And Augmentation Of Internal Wiring And Distribution Box At Server Room Signal
Tender Overview
Project Description
Tender for Special Special Repair To Entrance Gate At Snc (O) Mess, Addition / Alteration Of Structural Glazing In Stair Complex Of Family Wing (P-159 C) At Inhs Sanjivani And Augmentation Of Internal Wiring And Distribution Box At Server Room Signal School (P-22) At Naval Base Under Ge(Nw) Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete unreinforced in any Position not otherwise specifically provided for , complete all as specified and as directed by Engr-in Charge |
| 2 | Demolition of brick/PCC Block masonary work built in cement mortar, complete all as specified and as directed by Engr-in Charge |
| 3 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out, complete all as specified and as directed by Engr-in Charge |
| 4 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of path/hardstanding. |
| 5 | M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified |
| 6 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand , complete all as specified and as directed by Engr-in Charge |
| 7 | M&L for providing cement concrete Type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 8 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation in soft/loose soil complete all as specified and as directed. |
| 9 | Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified |
| 10 | Removal of surplus soil to a distance n.exc. 50 m and n.exc. 1.5 m above the starting point as directed by Engineer - In - Charge. |
| 11 | M&L cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete all as specified. |
| 12 | M&L precast cement cocrete block masonary (Type C1 1:3:6 )with solid blocks exc 10 cm width and setting in mortar 1 :6 |
| 13 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) offoundation and plinth beams; and similar work; vertical or to batter flat rough finidshed complete all as specified and as directed. |
| 14 | M&L Formwork to sides and soffits roof beams, lintels flat finished rough complete all as specified and as directed. |
| 15 | M&L Formwork to sides of pillers,posts,structs,piers,columns etc complete all as specified and as directed. |
| 16 | M&L for reinforced cement concrete Nominal Mix type M-20 1:1.5:3 (using 20mm graded crushed stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 17 | M&L for reinforced cement concrete type M-20 1:1.5:3 (Nominal Mix) (using graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,lintel etc and the like complete all as specified and as directed. |
| 18 | M&L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 19 | S&F TMT bars 6mm to 8mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 20 | S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165. complete all as specified and directed. |
| 21 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and mixing water proofing compound finished smooth and even without using extra cement complete all as specified and as directed. |
| 22 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl. mixing water proofing compound and finished fair and even without using extra cement complete all as specified and as directed. |
| 23 | M & L for preparation of new plastered external wall surface and applying two coats of Antifungal and anti algae premium exterior emulsion (Apex Ultima protek/weather coat life long 10 or equivalent paint over two coat of elastomeric waterproofing membrane as per manufacturer instruction , complete all as specified and as directed by Engr-in Charge. Note: (i) The new surface shall be prepared using mechanical ways i.e jet spray, grinding etc, in such a manner so that there should not be any impression of dent, all cracks to be filled with crack filler and it should be made even all as per manufacturer instruction before application of primer/base coat and emulsion paint. The cost of materials, labour & T&P wherever required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacturer. The MoU between contractor and paint manufacturer to this effect shall be submitted prior to execution of these items.(iii) The conractor shall be submitted performance guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completetion of entire work (iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor |
| 24 | M&L for Aesthetic Jali Work (Wooden Finish) : Installation Of Low- Maintenance And Weather-Resistant Ornamental Jali (Attice) Work Using Premium-Grade Aluminum Hollow Sections With High-Fidelity with necessary angles , cleats and rebates ,Wood teak-Grain Powder Coating, Providing The Looks Of Traditional Carpentry,Complete All As Specified Note - Rate inclusive of Scaffolding upto 10 mtr height, complete all as specified and as directed by Engr-in Charge. |
| 25 | S&F Illuminated False Ceiling : Installation Of A Soffit Celling At A Height Of 6.0 Mfters Using Wood-Textured Cnc Cut Acp Ceiling Complete All As Specified. Note- Thickness as directed by Engr-in-Charge/GE. |
| 26 | Providing and fabricating, and installing a kerala traditional -style sopanam( balusters/ Lattice) made high quality multi wood boards of minimum size 20mm x 50mm, including decorative head board , side penels , treditional cravings/ design elements , smooth edge finishing , polishing / laminate finish, lipping matching the powder coating and all necessary fittings and accessories, complete all as specified and as directed. Note- Size and thickness as directed by Engr-in-Charge/GE. |
| 27 | S & F of roof trusses trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular pipes or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 28 | Providing and fixing natural laterite stone cladding of approved size , minimum thickness not less than 20mm , texture and colour on gate pillers, including surface preparation cement mortar or approved adhisive , including necessary scaffolding complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for laying MP ceramic roofing tiles of approved quality , size and shade, fixed over the prepared roof frame work and necessary fittings,complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L for ridge or hip tiles to suit mangalore pattern of roofing ceramic tiles tiles bedded and jointed in cement mortar 1:6 complete all as specifiede and as directed |
| 31 | Premium Signage & Name Board : Fabrication Of The Main Signage Board Using A Black Granite Texture Base with 3D acrylic letteswith internal LED modules For A \\"Face-Lit\\" Effect, Ensuring High Visibility,Complete All As Specified |
| 32 | M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete (Make-Asian Apcolite or Equal from Berger, Nerolac) |
| 33 | M&L for mild steel screw bolts 11 to 15 mm neck dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and length of bolt exc 22.5 but nexc 30cm long Complete All As Specified Please Enable Macros to View BoQ information |
| 34 | M&L for mild steel screw bolts 11 to 15 mm neck dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and length of bolt exc 22.5 but nexc 30cm long Complete All As Specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender