Tender For Repair To Wooden And Steel Furniture At Af Station Bhisiana, Abohar And Ferozepur Under Ge(Af) Bhisiana
Tender Value
34 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wooden And Steel Furniture At Af Station Bhisiana, Abohar And Ferozepur Under Ge(Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Repair to Chair Easy (FD-229) |
| 2 | Removing the unserviceable front leg of Chair Easy and supplying and fixing a new leg of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 3 | Removing the unserviceable rear leg of Chair Easy and supplying and fixing a new leg of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 4 | Removing the unserviceable fillet (holed for caning seat and back) of Chair Easy and supplying and fixing a new fillet of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 5 | Removing the unserviceable arm rest of Chair Easy and supplying and fixing a new arm of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 6 | Removing the unserviceable rail (any front/back/side) of Chair Easy and supplying and fixing a new rail of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 7 | Removing the unserviceable cane from the seat or back of the Chair Easy and providing and fixing/canning with new plastic cane, half-round, 2 mm wide and 0.4 mm thick, of approved shade and as per Godrej pattern, including minor repairs such as grinding of the outer surface, hammering of nails, and filling micro-cracks with Fevicol and wood putty, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 8 | Material and labour for French polishing of all surfaces of Chair Easy requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Supply and fixing in replacement complete set of PVC shoes of Chair Easy, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 10 | Repair to Chair Dining (FD-279) |
| 11 | Removing the unserviceable front leg of Chair Dining and supplying and fixing a new leg of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 12 | Removing the unserviceable rear leg of Chair Dining and supplying and fixing a new leg of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 13 | Removing the unserviceable rail (any front/back/side) of Chair Dining and supplying and fixing a new rail of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 14 | Removing the unserviceable horizontal wooden members of back rest of Chair Dining and supplying and fixing a new member of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 15 | Removing the unserviceable stiffener (side and between front leg, rear leg etc) of Chair Dining and supplying and fixing a new stiffener of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 16 | Removing the unserviceable cane from the seat of the Chair Dining and providing and fixing/canning with new plastic cane, half-round, 2 mm wide and 0.4 mm thick, of approved shade and as per Godrej pattern, including minor repairs such as grinding of the outer surface, hammering of nails, and filling micro-cracks with Fevicol and wood putty, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 17 | Removing the existing unserviceable cushioned seat along with its base from Dining Chair (FD/MAP/II/04) and supplying and fixing a new seat of the same size, comprising 12 mm thick commercial plywood of BWR grade as the base, 75 mm thick polyurethane (PU) foam of 40-density, duly upholstered with best-quality tapestry cloth of approved shade and design, including all necessary fixing and finishing, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 18 | Removing the existing unserviceable plastic seat from Dining Chair (FD/MAP/II/05) and supplying and fixing a new PVC seat 4mm thick with holes & screwed with frame of the same size, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 19 | Supply and fixing in replacement complete set of PVC shoes of Chair Dining (any type), complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 20 | Material and labour for French polishing of all surfaces of Chair Dining (cushioned/Caneing/PVC seat) requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | Repair to Chair Writing (FD-280) |
| 22 | Removing the unserviceable front leg of Chair Writing and supplying and fixing a new leg of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 23 | Removing the unserviceable rear leg of Chair Writing and supplying and fixing a new leg of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 24 | Removing the unserviceable rail (any front/back/side) of Chair Writing and supplying and fixing a new rail of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 25 | Removing the unserviceable horizontal wooden members of back rest of Chair Writing and supplying and fixing a new member of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 26 | Removing the unserviceable stiffener (side and between front leg, rear leg etc) of Chair Writing and supplying and fixing a new stiffener of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 27 | Removing the unserviceable arm rest of Chair Writing and supplying and fixing a new arm of the same size, made out of 1st class teak wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 28 | Removing the unserviceable cane from the seat of the Chair Writing and providing and fixing/canning with new plastic cane, half-round, 2 mm wide and 0.4 mm thick, of approved shade and as per Godrej pattern, including minor repairs such as grinding of the outer surface, hammering of nails, and filling micro-cracks with Fevicol and wood putty, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 29 | Material and labour for French polishing of all surfaces of Chair Writing requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | Supply and fixing in replacement complete set of PVC shoes of Chair Writing, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 31 | Repair to Hard Bed Ply Top (FD-246 & 247) |
| 32 | Removing the unserviceable plywood top of Bed and supplying and fixing a new top of the same size, made of 12 mm thick commercial plywood of BWR grade, conforming to IS 303:2024, ISI marked, in a single piece, including fixing with new 25 mm long steel screws/nuts and bolts with washers, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 33 | Removing the unserviceable long rail of Bed and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 34 | Removing the unserviceable stiffener of Bed and supplying and fixing a new stiffener of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 35 | Removing the unserviceable headboard of Bed and supplying and fixing a new headboard of the same size, made of a teak wood frame covered with 3 mm thick BWR-grade plywood, conforming to IS 303:2024, one side teak face (visible outer surface is covered with a thin teak wood veneer, showing the natural teak wood grain) and other side standard commercial-grade plywood face, including teak wood beading all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 36 | Removing the unserviceable foot board of Bed and supplying and fixing a new foot board of the same size, made of a teak wood frame covered with 3 mm thick BWR-grade plywood, conforming to IS 303:2024, both side teak face (covered with a thin teak wood veneer, showing the natural teak wood grain), including teak wood beading all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 37 | Material and labour for French polishing of all surfaces of Hard Bed Ply Top requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Repair to Side Board (FD-241) |
| 39 | Removing the unserviceable top of side board and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 40 | Removing the unserviceable door of side board (any leaf right or left side) and supplying and fixing a new door of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, fixed with piano hinges, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 41 | Removing the unserviceable side of side board and supplying and fixing a new side of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 42 | Removing the unserviceable back ply of side board and supplying and fixing a new back ply of the same size, made of 6mm thick commercial plywood of BWR grade, conforming to IS 303:2024, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 43 | Removing the unserviceable drawer of side board and supplying and fixing a new drawer of the same size, with the front made of 18/19 mm thick teak-faced pre-laminated particle board and the sides, bottom and back made of 12 mm thick commercial plywood of BWR grade, conforming to IS 303:2024, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 44 | Material and labour for French polishing of all surfaces of Side Board requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | Repair to Table Dining 06/08 Persons (FD/MAP-II/03/FD, FD-273, FD-376) |
| 46 | Removing the unserviceable top of table 6 person and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 47 | Removing the unserviceable top of table 8 person and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 48 | Removing the unserviceable long rail of table 6 person and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 49 | Removing the unserviceable long rail of table 8 person and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 50 | Removing the unserviceable short rail of table and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 51 | Removing the unserviceable leg of table and supplying and fixing a new leg of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 52 | Material and labour for French polishing of all surfaces of Table Dining 06 Persons requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 53 | Material and labour for French polishing of all surfaces of Table Dining 08 Persons requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | Repair to Table Dressing Gents With Mirror (FD-230) |
| 55 | Repair to the dressing table gents by removing and replacing unserviceable components, including the top, sides, drawer front, base, back, etc., with new pre-laminated particle board or BWR-grade plywood, as applicable, of the same type, thickness and size as the existing components, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 56 | Removing the unserviceable looking mirror of the dressing table gents and supplying and fixing a new 5 mm thick mirror with plywood backing, of the same size as the existing mirror, including necessary repairs to the frame and beading, wherever required, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 57 | Material and labour for French polishing of all surfaces of Table Dressing Gents requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | Repair to Table Dressing Ladies With Mirror (FD-251) |
| 59 | Repair to the dressing table ladies by removing and replacing unserviceable components, including the top, sides, drawer front, base, back, etc., with new pre-laminated particle board or BWR-grade plywood, as applicable, of the same type, thickness and size as the existing components, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 60 | Removing the unserviceable looking mirror of the dressing table ladies and supplying and fixing a new 5 mm thick mirror with plywood backing, of the same size as the existing mirror, including necessary repairs to the frame and beading, wherever required, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 61 | Material and labour for French polishing of all surfaces of Table Dressing Ladies requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 62 | Repair to Peg Table (FD–384) |
| 63 | Removing the unserviceable top of peg table and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 64 | Removing the unserviceable leg of peg table and supplying and fixing a new leg of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 65 | Removing the unserviceable long rail/short rail/top rail/bottom rail/stiffener of peg table and supplying and fixing a new of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 66 | Supply and fixing in replacement complete set of PVC shoes of peg table, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 67 | Material and labour for French polishing of all surfaces of Peg Table requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 68 | Repair to Table Centre (FD–274) |
| 69 | Removing the unserviceable top of table centre and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 70 | Removing the unserviceable leg of table centre and supplying and fixing a new leg of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 71 | Removing the unserviceable long rail of table centre and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 72 | Removing the unserviceable short rail of table centre and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 73 | Removing the unserviceable stiffener of table centre and supplying and fixing a new stiffener of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 74 | Supply and fixing in replacement complete set of PVC shoes of table centre, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 75 | Material and labour for French polishing of all surfaces of Table Centre requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 76 | Repair to Teapoy Wooden (FD–278) |
| 77 | Removing the unserviceable top of teapoy and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 78 | Removing the unserviceable leg of teapoy and supplying and fixing a new leg of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 79 | Removing the unserviceable long rail of teapoy and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 80 | Removing the unserviceable short rail of teapoy and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 81 | Removing the unserviceable stiffener of teapoy and supplying and fixing a new stiffener of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 82 | Supply and fixing in replacement complete set of PVC shoes of teapoy, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 83 | Material and labour for French polishing of all surfaces of Teapoy Wooden requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | Repair to Table Writing (FD-275) |
| 85 | Removing the unserviceable top of table writing and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 86 | Removing the unserviceable door of table writing and supplying and fixing a new door of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, fixed with piano hinges, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 87 | Removing the unserviceable drawer of table writing and supplying and fixing a new drawer of the same size, with the front made of 18/19 mm thick teak-faced pre-laminated particle board and the sides, bottom and back made of 12 mm thick commercial plywood of BWR grade, conforming to IS 303:2024, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 88 | Removing the unserviceable leg of table writing and supplying and fixing a new leg of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 89 | Removing the unserviceable back ply of table writing and supplying and fixing a new back ply of the same size, made of 6mm thick commercial plywood of BWR grade, conforming to IS 303:2024, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 90 | Supply and fixing in replacement complete set of PVC shoes of table writing, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 91 | Material and labour for French polishing of all surfaces of Table Writing requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | Repair to Hat Stand with Mirror (FD- 233) |
| 93 | Supply and fixing in replacement aluminium peg hook of size and shape as per existing and complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 94 | Removing the unserviceable looking mirror of the hat stand and supplying and fixing a new 5 mm thick mirror of the same size as the existing mirror, including necessary repairs to the frame and beading, wherever required, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 95 | Removing the unserviceable back ply of hat stand and supplying and fixing a new back ply of the same size, made of 6mm thick commercial plywood of BWR grade, conforming to IS 303:2024, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 96 | Material and labour for French polishing of all surfaces of Hat Stand requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 97 | Repair to Sofa Set (FD-281) |
| 98 | Removing the unserviceable arm rest of sofa (any side of single-seater or three-seater) and supplying and fixing a new arm of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 99 | Removing the unserviceable front rail of sofa set single seat and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 100 | Removing the unserviceable front rail/long of sofa set three seater and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 101 | Removing the unserviceable side rail of sofa set (any side of single-seater or three-seater) and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 102 | Removing the unserviceable leg of the sofa set (single-seater or three-seater, front or rear) and supplying and fixing a new leg of the same size, made of hardwood, including all necessary fittings, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 103 | Removing the unserviceable wooden batten of the sofa set (single-seater or three-seater) and supplying and fixing a new batten of the same size, made of hardwood, including all necessary fittings, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 104 | Supply only sofa cushion of size 530 mm × 560 mm × 100 mm thick, made of 32-density polyurethane (PU) foam, duly upholstered and provided with a removable cushion cover made of best-quality tapestry cloth of approved shade and design, fitted with a concealed zip chain stitched on one side for easy removal and refitting, complete all as specified and as directed by the Engineer-in-Charge. |
| 105 | Removing the existing unserviceable cushion cover and supplying and fixing a new removable cushion cover made of best-quality tapestry cloth of approved shade and design, suitable for a sofa cushion of size 530 mm × 560 mm × 100 mm thick, including stitching and providing a concealed zip chain on one side for easy removal and refitting, complete all as specified and as directed by the Engineer-in-Charge. |
| 106 | Material and labour for French polishing of all surfaces of Sofa Set (single seat) requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 107 | Material and labour for French polishing of all surfaces of Sofa Set (three seater) requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 108 | Repair to Table 900mmX600mmX760mm, With or w/o Drawer (FD–284) |
| 109 | Removing the unserviceable top of table and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 110 | Removing the unserviceable leg of table and supplying and fixing a new leg of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 111 | Removing the unserviceable long rail of table and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 112 | Removing the unserviceable short rail of table and supplying and fixing a new rail of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 113 | Removing the unserviceable stiffener of table and supplying and fixing a new stiffener of the same size, made out of hard wood, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 114 | Supply and fixing in replacement complete set of PVC shoes of table, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 115 | Material and labour for French polishing of all surfaces of Table 900mmX600mmX760mm, With or w/o Drawer requiring polishing, including both existing and newly replaced wooden parts, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | Bin Soiled Linen Large (FD-244) |
| 117 | Material and labour for French polishing of all surfaces of Bin Soiled Linen Large requiring polishing, comprising removal of old and worn-out polish, scratching and rubbing with sandpaper, filling cracks and surface defects with suitable wood filler wherever required, and preparing and making all surfaces smooth for polishing, followed by application of French polish in one or more coats to achieve a uniform, glossy and shining finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 118 | Replacement of handle/knob/hasp and staple to door/drawer of wooden furniture |
| 119 | Supply and fixing in replacement stainless steel handle of size 75mm including fixing screws complete all as specified and as directed by the Engineer-in-Charge. |
| 120 | Supply and fixing in replacement aluminium anodized knob as per sample including fixing screws complete all as specified and as directed by the Engineer-in-Charge. |
| 121 | Supply and fixing in replacement stainless steel hasp and staple of size 75mm including fixing screws/nut bolt complete all as specified and as directed by the Engineer-in-Charge. |
| 122 | Repair to Table Office Clerk Steel (FD- 1004) |
| 123 | Removing the unserviceable top of table clerk steel and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 124 | Material and labour for preparation of steel surfaces of table clerk (exposed surface, internal and external) by scrubbing with emery paper, filling if required and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 125 | Repair to Table Steel (900mmx900mmx760mm) (FD-1009) |
| 126 | Removing the unserviceable top of table steel and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 127 | Material and labour for Welding to broken joints (any numbers) of table steel complete all as specified and as directed by Engr-in-charge. |
| 128 | Material and labour for preparation of steel surfaces of table (exposed surface, internal and external) by scrubbing with emery paper, filling if required and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 129 | Supply and fixing in replacement complete set of PVC shoes of table steel, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 130 | Repair to Table Steel (900mmx600mmx760mm) FD-1007 & FD-1008 |
| 131 | Removing the unserviceable top of table steel and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 132 | Material and labour for Welding to broken joints (any numbers) of table steel complete all as specified and as directed by Engr-in-charge. |
| 133 | Removing the unserviceable leg of table steel and supplying and fixing a new leg of the same size, made of 25 Sqmm MS tube having wall thickness 1.6mm, including welding work, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 134 | Material and labour for preparation of steel surfaces of table (exposed surface, internal and external) by scrubbing with emery paper, filling if required and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 135 | Supply and fixing in replacement complete set of PVC shoes of table steel, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 136 | Repair to Charpoy Gi Pipe with Ply Top (FD-220) |
| 137 | Removing the unserviceable plywood top of charpoy and supplying and fixing a new top of the same size, made of 12 mm thick commercial plywood of BWR grade, conforming to IS 303:2024, ISI marked, in a single piece, including fixing with new suitable size round headed steel nuts and bolts with washers, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 138 | Removing/unscrewing the old and unserviceable long rail from the GI pipe charpoy and supplying and fixing a new long rail made of 32 mm bore medium-grade GI pipe, cut to the required length and duly threaded at both ends for proper fixing to the charpoy, including all necessary fittings and jointing, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 139 | Removing/unscrewing the old and unserviceable short rail from the GI pipe charpoy and fixing a new short rail fabricated from the long rail retrieved under the item hereinbefore, cut to the required length and duly threaded at both ends for fixing to the charpoy frame, including all necessary fittings and jointing, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 140 | Removing/unscrewing the old and unserviceable leg from the GI pipe charpoy and fixing a new leg fabricated from the short rail retrieved under the item hereinbefore, cut to the required length and duly threaded at one end. The other end shall be provided with a 3 mm thick MS base plate, duly welded, including welding of two parallel MS clamps made of 25 × 3 mm flat iron, fabricated to the required shape and size suitable for holding 19 mm diameter conduit, as shown in the drawing. The clamps and base plate shall be duly painted with black synthetic enamel paint, including all necessary fittings and finishing, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 141 | Note for long rail/short rail and leg of charpoy :- (i) The existing serviceable three-way elbows and check nuts shall be dismantled carefully and reused. Any unserviceable elbows or check nuts, if required to be replaced, shall be supplied and fixed with new ones. Such replacement items shall be measured and paid for separately under the respective BOQ items as supply only.(ii) The cutting schedule for the aforesaid items shall be prepared and approved by the Engineer-in-Charge prior to commencement of the work. |
| 142 | Supply only in replacement new 3-way elbow 32mm bore, 6mm wall thickness (ISI marked), complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 143 | Supply only in replacement new check nut 32mm bore, 6mm wall thickness (ISI marked), complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 144 | Repair to CHARPOY IP HARD TOP (FD/MAP-II/01) |
| 145 | Removing the unserviceable plywood top of charpoy IP Hard top and supplying and fixing a new top of the same size, made of 12 mm thick commercial plywood of BWR grade, conforming to IS 303:2024, ISI marked, in a single piece, including fixing with new suitable size round headed steel nuts and bolts with washers, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 146 | Material and labour for preparation of steel surfaces of charpoy IP Hard top (exposed surface, internal and external) by scrubbing with emery paper, filling if required and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 147 | Supply and fixing in replacement complete set of PVC hard rubber shoes or 3 mm thick rubber sheet fixed with adhesive shall be fixed at bottom of each leg of charpoy, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 148 | Repair to Charpoy Folding IP With Hard Top (FD 388 R ) |
| 149 | Removing the unserviceable plywood top of charpoy folding and supplying and fixing a new top of the same size, made of 8 mm thick commercial plywood of BWR grade, conforming to IS 303:2024, ISI marked, in two equal pieces, including fixing with new suitable size round headed steel nuts and bolts with washers, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 150 | Material and labour for Welding to broken joints (any numbers) of charpoy complete all as specified and as directed by Engineer-in-Charge. |
| 151 | Material and labour for preparation of steel surfaces of charpoy by scrubbing with emery paper, filling if required and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 152 | Supply and fixing in replacement complete set of PVC hard rubber shoes/cap shall be fixed at bottom of each leg of charpoy, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 153 | Repair to ALMIRAH LARGE STEEL, MEDIUM STEEL (FD-1032/1031) |
| 154 | Material and labour for preparation of surfaces of almirah large steel (exposed surface, internal and external) by denting wherever required, scrubbing with emery paper, filling if required, and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 155 | Material and labour for preparation of surfaces of almirah medium steel (exposed surface, internal and external) by denting wherever required, scrubbing with emery paper, filling if required, and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 156 | Removing of old unserviceable lock from almirah large/medium steel and supply and fixing new lock same as per existing with two keys complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 157 | Removing of old unserviceable handle from almirah large/medium steel and supply and fixing new MS handle same as per existing complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 158 | Removing the old and unserviceable three-way locking device and chakar (excluding lock, handle and rod) from the large/medium-size steel almirah and supplying and fixing a new three-way locking device and Chakar of the same type and pattern as the existing one, including necessary repairs to the locking rods wherever required, complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 159 | Removing the old unserviceable shelf from the almirah large steel and supplying and fixing a new shelf made of 20-gauge mild steel (MS) sheet made to shape as per existing, including providing and fixing suitably shaped supporting clamps to match the existing shelf arrangement, and applying one coat of suitable primer and two coats of 1st quality synthetic enamel paint of approved shade by spray gun, complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 160 | Removing the old unserviceable shelf from the almirah medium steel and supplying and fixing a new shelf made of 20-gauge mild steel (MS) sheet made to shape as per existing, including providing and fixing suitably shaped supporting clamps to match the existing shelf arrangement, and applying one coat of suitable primer and two coats of 1st quality synthetic enamel paint of approved shade by spray gun, complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 161 | Removing the old unserviceable leg from the almirah large steel and supplying and fixing a new leg made out of 1mm thick CRCA sheet, made to shape as per existing, including welding work, and applying one coat of suitable primer and two coats of 1st quality synthetic enamel paint of approved shade by spray gun, complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 162 | Removing the old unserviceable leg from the almirah medium steel and supplying and fixing a new leg made out of 1mm thick CRCA sheet, made to shape as per existing, including welding work, and applying one coat of suitable primer and two coats of 1st quality synthetic enamel paint of approved shade by spray gun, complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 163 | Repair to Chair Verandah (FD-256 & 359) |
| 164 | Removing the unserviceable cane from the seat and back of the Chair Verandah and providing and fixing/canning with new plastic cane, 4-4.5 mm wide of approved shade and as per Godrej pattern, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 165 | Material and labour for Welding to broken joints (any numbers) of Chair Verandah complete all as specified and as directed by Engineer-in-Charge. |
| 166 | Material and labour for preparation of steel surfaces of Chair Verandah by scrubbing with emery paper, and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 167 | Supply and fixing in replacement complete set of Hard Rubber toe /shoes of chair, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 168 | Repair to Table Computer Map (FD/E6/MAP/03 & TP) |
| 169 | Removing the unserviceable top of table steel and supplying and fixing a new top of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, including teak wood beading 4mm thick all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 170 | Material and labour for Welding to broken joints (any numbers) of table steel complete all as specified and as directed by Engr-in-charge. |
| 171 | Removing of old unserviceable channel of drawer/ keyboard tray/mouse tray and supply and fixing new telescope channel same as per existing suitable size complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 172 | Removing the unserviceable keyboard tray of table and supplying and fixing a new keyboard tray of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 173 | Removing the unserviceable mouse tray of table and supplying and fixing a new mouse tray of the same size, made of 18/19mm thick pre-laminated particle board, teak faced, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 174 | Repair to the drawer of the table by removing and replacing the unserviceable front, base, sides and back, wherever required, with new 18/19 mm thick pre-laminated particle board of the same size, shade and finish as the existing, including all necessary cutting, jointing, fitting and finishing, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 175 | Supply and fixing in replacement complete set of shoe/leg with nylon buffers of table, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 176 | Repair to Chair CB Steel with Arms (FD 75(M)) |
| 177 | Removing the unserviceable seat frame of chair and supplying and fixing a new seat frame of the same size, made out of hard wood duly polished, including all necessary fitting, duly weaved with new plastic cane, half-round, 2 mm wide and 0.4 mm thick, of approved shade and as per Godrej pattern, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 178 | Removing the unserviceable back frame of chair and supplying and fixing a new back frame of the same size, made out of hard wood duly polished, including all necessary fitting, duly weaved with new plastic cane, half-round, 2 mm wide and 0.4 mm thick, of approved shade and as per Godrej pattern, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 179 | Material and labour for preparation of steel surfaces of chair CB by scrubbing with emery paper, filling if required and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 180 | Removing the unserviceable arm rest of Chair CB and supplying and fixing a new arm of the same size, made out of teak wood, duly painting with synthetic enamel paint in black colour, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 181 | Repair to Locker Bed Side Steel (FD-257) |
| 182 | Supply and fixing in replacement stainless steel hasp and staple of size 100mm including fixing screws/nut bolt/riveting complete all as specified and as directed by the Engineer-in-Charge. |
| 183 | Supply and fixing in replacement stainless steel handle of size 100mm including fixing screws complete all as specified and as directed by the Engineer-in-Charge. |
| 184 | Removing the old unserviceable leg/ foot rest from the locker bed side and supplying and fixing a new leg/ foot rest made out of 1mm thick PBI sheet, made to shape as per existing, including welding work, and applying one coat of suitable primer and two coats of 1st quality synthetic enamel paint of approved shade by spray gun, complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 185 | Material and labour for preparation of surfaces of locker bed side steel (exposed surface, internal and external) by denting wherever required, scrubbing with emery paper, filling if required, and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 186 | Repair to Chair Writing (MAP) (FD/E6/MAP/12 & TP) |
| 187 | Removing the existing unserviceable cushioned seat and back along with its base from Chair Writing and supplying and fixing a new seat and back of the same size and shape, comprising ply wood upholstered with fabric and 50 mm thick polyurethane (PU) foam of 50-density, duly upholstered with best-quality tapestry cloth of approved shade and design, including all necessary fixing and finishing with PVC lipping all round, including painting to steel frame with synthetic enamel paint (1st quality) of approved shade with spray gun, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 188 | Removing the unserviceable arm of chair and supplying and fixing a new one piece arm rest made out of black integral skin polyurethane and reinforced with MS insert of the same size and shape, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 189 | Supply and fixing in replacement complete set of Rubber Stoper /shoes of chair, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 190 | Repair to Chair Computer (MAP)/ Chair Revolving (FD/E6/MAP/01 & TP) |
| 191 | Removing the existing unserviceable cushioned seat and back along with its base from Chair Computer and supplying and fixing a new seat and back of the same size and shape, comprising 12mm ply wood upholstered with fabric and 40 mm thick polyurethane (PU) foam of 40-density, duly upholstered with best-quality tapestry cloth of approved shade and design, including all necessary fixing and finishing with PVC lipping all round, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 192 | Removing the unserviceable arm of chair and supplying and fixing a new one-piece arm rest made out of black integral skin polyurethane and reinforced with MS insert of the same size and shape, including all necessary fitting, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 193 | Removing the unserviceable hydraulic system (gas lift mechanism) of the chair and supplying and fixing a new hydraulic system of the same type, size and capacity as the existing one, including all necessary fittings, adjustments and testing to ensure proper functioning, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 194 | Removing the unserviceable base of the chair and supplying and fixing a new base of the same type, size and capacity as the existing one, including all necessary fittings, adjustments and testing to ensure proper functioning, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 195 | Removing the unserviceable base wheel of the chair and supplying and fixing a new wheel of the same type, size and capacity as the existing one, including all necessary fittings and adjustments, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 196 | Material and labour for preparation of steel surfaces of side rack with tray (FD-81M / FD-1023) (exposed surface, internal and external) by denting wherever required, scrubbing with emery paper, filling if required, and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 197 | Material and labour for preparation of steel surfaces of rack shoe (FD/E6/MAP/02) (exposed surface, internal and external) by denting wherever required, scrubbing with emery paper, filling if required, and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 198 | Material and labour for preparation of steel surfaces of table for senior officers (FD-1002) (exposed surface, internal and external) by denting wherever required, scrubbing with emery paper, filling if required, and applying one or more coat of synthetic enamel paint (1st quality) of approved shade with spray gun upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge. |
| 199 | Removing of old unserviceable lock from door/drawer of any type of Table/ Book Shelf/ Book case steel or wooden and supply and fixing new lock same as per existing with two keys complete all as shown on the respective drawing, as specified and as directed by the Engineer-in-Charge. |
| 200 | Repair to Repair Of School Chair with Hard Board (FD/E6/MAP/05) |
| 201 | Removing the unserviceable seat and back from school chair and supplying and fixing a new seat and back of the same type, made out of 4mm thick PVC in single piece, weight not less than 1.2 kg, including all necessary fittings/fixture, adjustments, complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 202 | Removing the unserviceable hand board from school chair and supplying and fixing a new hand board top openable with hinges on RHS, made of 18/19mm thick pre-laminated particle board exterior grade approved shade, including teak wood beading 4mm thick all round, including hinges, iron strips etc; complete all as shown on the drawing, as specified and as directed by the Engineer-in-Charge. |
| 203 | Net CONTRACT SUM will be worked out in General Summary after deduction of ‘CREDIT SCHEDULE’ amount inserted by MES. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender