Tender For As And As To Parking Shed Next To Adm Bldg, Samudra Manthan Conference Hall In Bldg No. P-47 And Industrial Canteen At Mo[V] New Site Under Ge[Nd] Visakhapatnam
Tender Value
1.23 Crore
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
1.98 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for As And As To Parking Shed Next To Adm Bldg, Samudra Manthan Conference Hall In Bldg No. P-47 And Industrial Canteen At Mo[V] New Site Under Ge[Nd] Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 2 | Demolition of Unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish out side MD land complete all as specified and as directed. |
| 3 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish out side MD land complete all as specified and as directed. |
| 4 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed |
| 5 | Demolition of plain or corrugated steel sheeting any gauge, thickness or similar pattern as in roof coverings complete all as directed |
| 6 | Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 7 | Excavation in trenches not exc 1.5m wide and depth exc 1.5m but not exc 3.0m for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 8 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. (Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.) |
| 9 | Removing excavated material /soil to a distance exc 250m but not exceeding 500m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed |
| 10 | M & L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified. |
| 11 | Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in foundation, footing, plinth beam using 20mm graded stone aggregate complete all as specified and as directed. |
| 12 | Use and waste of steel formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beams and similar works, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 13 | Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in columns, pillars, piers, posts and struts, etc using 20mm graded stone aggregate complete all as specified and as directed. |
| 14 | Use and waste of steel Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 15 | Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span using 20mm graded stone aggregate complete all as specified and as directed. |
| 16 | Use and waste of steel Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 17 | Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in chajjas using 20mm graded stone aggregate complete all as specified and as directed. |
| 18 | Use and waste of steel Formwork to sides and soffits of chajjas and similar articles including edges for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 19 | M & L for mild steel TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 20 | M & L for high strength corrosion resistant deformed steel bars bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spaces and binders complete all as directed |
| 21 | S& F rolled mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W(Gde-E-250) quality-B including painting with one shop coat of zinc chrome primer at contractors workshop before fabrication complete all as specified and directed |
| 22 | S& F rolled mild steel plates (plain or chequered), channels, square cut or notched, forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed |
| 23 | S & F mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as directed |
| 24 | M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 25 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / 'Z' profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with and including self tapping screws complete all as specified and directed. |
| 26 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with and including self tapping screws complete all as specified and directed. |
| 27 | M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 8mm dia bars at every fourth course of brick work complete all as specified and directed. |
| 28 | M & L for brick work with Fly Ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks complete all as specified and directed. |
| 29 | M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. |
| 30 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces duly mixed with and including liquid water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as specified and directed. |
| 31 | M & L for providing and injecting chemical emulsion for post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at 2.25 litres per linear running metre including drilling and plugging holes with cement mortar (1:2) to match with the existing surface complete all as specified and directed by Engineer-in-Charge. |
| 32 | M & L for providing and injecting emulsion for post construction anti-termite treatment under existing floors using emulsion CHLOROPHYRIFOS 20 EC at 1% concentration at the rate of one litre per each hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floor complete all as specified and directed by Engineer-in-Charge. |
| 33 | M & L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as directed. |
| 34 | M & L for 100mm thick, PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in flooring / hard standing complete all as specified and directed. |
| 35 | M & L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 36 | Use and waste of steel formwork to soffits of suspended slabs rough finished surfaces of concrete flat complete all as specified and directed. |
| 37 | M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces of slabs, chajjas, roof projection, shelves, etc. finished even and smooth with out using extra cement complete all as specified and directed. |
| 38 | M & L for preparation of newly plastered surfaces of ceilings by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.[Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.] |
| 39 | M & L for preparation of concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm area, rendering 10mmthick in cement mortar 1:4 duly mixed with and including water proofing compound as per manufacturers instructions on concrete surfaces finished even and smooth without using extra cement for levelling the surfaces smooth to receive the water proofing membrane, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sqm reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sqm, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion including applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sqm on top and bottom of membrane and finally finished with one coat of bituminous aluminium paint at 100 grams per Sqm complete all as specified and as directed. |
| 40 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. |
| 41 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 42 | S & F Stainless steel butt hinge 125mm long |
| 43 | S & F floor door stopper of aluminium body and tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mm complete all as specified and as directed. |
| 44 | S & F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as directed |
| 45 | S & F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty fixed to aluminium windows in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 46 | S & F 12mm thick, Prelaminated Particle Board, interior grade, prelaminated two side with decorative Choice Lamination on Both Sides, for kitchen cup boards complete all as specified and as directed. |
| 47 | Supply and fixing factory made UPVC white colour Two track two panels sliding window upto 1.50mheight made of (big series) frame 67x50mm & sash 46x62mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 Sqm upto 2.50 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVC profile), appropriate dimension ofuPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately).[Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth &width of profile shall be acceptable. Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.] |
| 48 | S & F anodised aluminium grill (anodised transperant or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern with approved standard section and fixed to the existing window frame with CP brass / stainless ateel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as directed by the Engineer-in-Charge. |
| 49 | S & F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including necessary builders hardware complete all as specified and directed by the Engineer-in-Charge |
| 50 | Dismantling wall and ceiling boards of any description including frame work and cover fillets complete all as directed |
| 51 | S & F Seamless Calcium Silicate False Ceiling made out of 8mm thick, 1800mm x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish and applying two or more coats of Cement based Wall Care Putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer and including Frame Work using Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 52 | M & L for 40mm thick, PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in flooring complete all as specified and directed. |
| 53 | M & L for 50mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring complete all as specified and directed. |
| 54 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris outside MD land complete all as specified and as directed. |
| 55 | M & L for double charged, vitrified coloured ceramic tiles 10mm thick (square/rectangular), area of each tile exceeding 0.42 Sqm but not exceeding 1.0 Sqm, as in floors set and jointed neat with epoxy grout and masking tape shall be put before putting the epoxy grout, (3mm joint filling shall be done using 3mm thick PVC spacers) grout shall be througly cleaned immediatlely and pointed in white15mm thick in CM 1:6 complete all as specified and as directed. |
| 56 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.Notes: [a] The colour/ shade/ design of tiles shall be as approved by GE.[b] The tile joint shall be kept as 3mm using tile spacers and masking tape shall be provided before applying of the epoxy grout and the surplus grout materials shall be thoroughly cleaned immediately. |
| 57 | M & L for double charged vitrified coloured ceramic tiles 10mm thick (square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in dado / skirting / risers to steps, etc set and jointed neat with epoxy grout and masking tape shall be put before putting the epoxy grout, grout shall be througly cleaned immediatlely and pointed in white or coloured to match the shade of the tile and laid over and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed. |
| 58 | M & L for coloured Glazed ceramic tiles of size 450x350x7 to 8mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 59 | M & L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:4 complete all as specified and as directed. [Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded.] |
| 60 | M & L for preparation of newly plastered surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.complete all as directed.(Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Exterior emulsion painting through their authorised applicators before commencement of the work to GE for approval. |
| 61 | M & L for preparation of newly plastered surfaces of walls by using vaccume based sanding machine, removal of nails and applying two coats of plastic emulsion paint by using auto roller / airless sprayer over one coat of alkali resistant primer on wall surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.[Note:- The contractor shall carryout painting & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out works through their authorised applicators before commencement of the work to GE for approval.] |
| 62 | Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed. |
| 63 | S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern] of size 560x440x395mm or nearest size, White, including flush pipe of polyethylene of low or high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 64 | S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 450mm X 300mm, 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 65 | S & F CPVC Pipes 20 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 66 | S & F CPVC Pipes 25 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 67 | S & F in repairs 15mm bore bib tap fancy type Chromium plated capstan head, screwed down, screwed for 15mm dia bore iron pipe complete all as specified and directed. [Make shall be Jaquar of Cat Part No. ACN-CHR-5041N or its equivalent] |
| 68 | S & F in repairs 15mm bore, Hand shower (Health faucet) (ABS Body) with 8mm dia, minimum 1.2m long Spirochrome flex & wall Hook complete all as directed. [Make shall be Jaquar of Cat No. ALD-587 or its equivalent] |
| 69 | S & F in repairs 15mm bore fancy type Chromium plated two way bib taps, screwed down for iron pipe or for brass ferrule with flanges complete all as specified and directed. [Make shall be Jaquar of Cat Part No. FLR-5041PM or its equivalent] |
| 70 | M & L for PVC (SWR) plain floor / Nahani trap of 75/110mm di outlet including jointing with solvent cement complete all as specified and as directed. |
| 71 | S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 72 | S & F 125mm dia round stainless steel (chrome polished) of grade SS-304, floor grating with cockroach trap with/without hole suitable for fixing in nahani trap including jointing with solvent cement complete all as directed |
| 73 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, two layered, hoisted and fixed in position including 20mm dia PTMT ball valve including taking down old tank complete all as specified and directed. |
| 74 | S & F frameless polished edge 6mm thick clear glass mirror, size as required including cutting, edge polishing, holes / cutouts for fittings, fixing with stanless steel mirror clips including making good to adjoining surfcaes complete all as specified and directed |
| 75 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 76 | S & F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as specified complete all as directed. |
| 77 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as directed |
| 78 | S & F factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 02 Nos of 150mm long brackets of 15x15mm MS square tube, the two vertical profiles are to be reinforced with 19x19mm MS tube and 50% of portion is fixed with 3mm thick pin headed / frosted glass and remaining portion is covered with wire mesh and 3mm thick pin headed / frosted glass louvers including 12mm dia MS guard bars and necessary fixtures complete all as directed. |
| 79 | S & F 150mm long Aluminium handles, anodised cast type complete all as directed |
| 80 | S & F aluminium anodised barrel tower bolt of size 150mm long of extruded section complete all as directed. |
| 81 | S & F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed. |
| 82 | M & L for 110mm bore PVC (SWR) bends any radius complete all as specified. |
| 83 | M & L for 75mm bore PVC (SWR) bends any radius complete all as specified. |
| 84 | M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified. |
| 85 | M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified. |
| 86 | S & F 110mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling or laid in floors including taking down old pipes complete all as specified and directed. |
| 87 | S & F 75mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling or laid in floors including taking down old pipes complete all as specified and directed. |
| 88 | S & F 110mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints laid in trenches including taking down old pipes complete all as specified and directed. |
| 89 | S & F 110mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints laid in trenches including taking down old pipes complete all as specified and directed. |
| 90 | M & L for 25mm thick, PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in flooring complete all as specified and directed. |
| 91 | M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified. |
| 92 | M & L for preparation of newly plastered surfaces of walls by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.[Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.] |
| 93 | S & F 6mm thick Calcium Silicate board false ceiling of board size 600x600mm of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish and applying two or more coats of Cement based Wall Care Putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer and including Frame Work using Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 94 | Complete removal of existing treatment over wall surfaces including preparation of surfaces by rubbing with sand paper and using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.[Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.] |
| 95 | Complete removal of existing treatment over wall surfaces including preparation of surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.complete all as directed.(Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Exterior emulsion painting through their authorised applicators before commencement of the work to GE for approval. |
| 96 | SCHEDULE 'A' PART-II [E/M Works]:Taking down aluminium / copper point wiring for light / fan / socket / power, etc complete with all fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, cover plates, frame and light fitings including making good to the disturbed surfaces complete all as directed Please Enable Macros to View BoQ information |
| 97 | SCHEDULE 'A' PART-II [E/M Works]:Taking down aluminium / copper point wiring for light / fan / socket / power, etc complete with all fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, cover plates, frame and light fitings including making good to the disturbed surfaces complete all as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender