Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58488963

Tender For Repair/Maint Of Water Treatment Plant At Main Water Point In Zone-Ii & 25 Sect Pump House At Mil Stn Lekhapani Under Ge Dinjan No.2

Issued by Statutory Bodies & Commissions/Committees · Tinsukia, Assam
Tender Value
27.95 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
55900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maint Of Water Treatment Plant At Main Water Point In Zone-Ii & 25 Sect Pump House At Mil Stn Lekhapani Under Ge Dinjan No.2

BOQ

Name of Work:- REPAIR/MAINT OF WATER TREATMENT PLANT AT MAIN WATER POINT IN ZONE-II & 25 SECT PUMP HOUSE AT MIL STN LEKHAPANI UNDER GE DINJAN NO.2
Sl. No. Item Description
1Removal of catalytic media (MnO2) complete from mild steel shell (oxidation chamber) of iron removal plant having capacity 10000 GPH/5000 GPH and disposal of unseviceable materials to a distance outside the pump house complete all as specified and directed by Engineer in charge
2Removal of filter media complete from mild steel shell of iron removal plant up to 10000 GPH/5000 GPH of dimension up to 2.5 metre dia and 3 metre height and disposal of unseviceable materials to a distance not exc 50 meter complete all as specified and directed by Engineer in charge
3Removal of filter media complete from mild steel shell Horizontal pressure filter of dimension up to 2.50 metre diameter and 7.2mtr length of capacity 30000 GPH and disposal of unseviceable materials to a distance not exc 50 meter complete all as specified and directed by Engineer in charge
4Scraping, de-scaling cleaning external surfaces of mild steel shell and applying two coats of red oxide /zinc chrome primer with one coat of approved anticorrosive paint over coat of red oxide /zinc chrome primer with necessary prepration of surfaces on external surface of iron removal plants / Lamella Clarifier plant and Horizontal pressure filter including pipelines / MS structures complete all as specified and directed by Engineer in charge
5Scraping, de-scaling cleaning internal surfaces of mild steel shell and applying two coats of red oxide /zinc chrome primer with one coat of approved black bituminous paint over coat of red oxide /zinc chrome primer of drinking water grade paints with necessary prepration of surfaces on internal surface of iron removal plants / Lamella Clarifier plant and Horizontal pressure filter complete all as specified and directed by Engineer in charge.
6Supply and incorporation of MNO2 of size 20-25 mm as filter media of iron removal plant / Oxidation chamber complete all as specified and directed by Engineer in charge
7Re-use of old filter media GRAVEL of size 12-25 mm after duly cleaning by jet and segregate them as per mentioned size and fill properly in iron removal plant / Horizontal pressure filter upto required thickness layer complete all as specified and directed by Engineer in charge
8Supply and incorporation of GRAVEL of size 12-25 mm as filter media of iron removal plant / Horizontal pressure filter complete all as specified and directed by Engineer in charge
9Re-use of old filter media GRAVEL of size 6-12 mm after duly cleaning by jet and segregate them as per mentioned size and fill properly in iron removal plant / Horizontal pressure filter upto required thickness layer complete all as specified and as directed by Engr-in-charge.
10Supply and incorporation of GRAVEL of size 6-12 mm as filter media of iron removal plant / Horizontal pressure filter complete all as specified and directed by Engineer in charge.
11Supply and incorporation of GRAVEL of size 3-6 mm as filter media of iron removal plant / Horizontal pressure filter complete all as specified and directed by Engineer in charge
12Supply and incorporation of GRAVEL of size 1.5-3.0 mm as filter media of iron removal plant / Horizontal pressure filter complete all as specified and directed by Engineer in charge
13Supply & incorporation of Filter SAND of 10x20 mesh size suitable as filter media of iron removal plant / Horizontal pressure filter complete all as specified and directed by Engineer in charge
14Taking out PVC strainers nozzle double nut type obtained from iron removal plant /Horizontal pressure filter and setting aside and cleaning the serviceable strainers for re-laying/ re-fixing or removal of unserviceable strainers from site of work complete all as specified and directed by Engineer in charge
15Supply & fixing new PVC strainers double nut type as per sample provided for iron removal plant /Horizontal pressure filter complete all as specified and directed by Engineer in charge
16Material & Labour for cleaning & washing of JACK WELL of dia 4.60 metre and depth 10 meter after complete pumping out of dirty water / sludge from the static tank (Pumpset is own arrangement of the contractor) by making preparatory arrangement and taking out deposited sludge, soils etc from the bottom including cleaning of inside walls with steel wire brush, gunny bags, etc and washing/ cleaning and removing sludge, soil, etc. to a distance not exceeding 50 meter from the pump house campus and deposited where directed complete including writing the words \\"Date Cleaned on\\" on the Front/Road side face complete all as specified and directed by Engineer in charge
17Material & Labour for cleaning/washing sedimentation tank of capacity 20000 Gallons after complete pumping out of dirty water / sludge from the static tank (Pumpset is own arrangement of the contractor) by making preparatory arrangement and taking out deposited sludge, soil etc. from the bottom including cleaning of inside walls / RCC channels with steel wire brush, gunny bags, etc and washing/cleaning and removing sludge, soils etc to a distance not exceeding 50 metre from the pump house campus area, and deposited where directed complete including writting the words \\"Date Cleaned on\\" on the Front/Road side face complete all as specified and directed by Engineer in charge
18Material & Labour for cleaning/washing Lamella clarifier plant (comprising of 01xFlocculation tank, 04xchemical dosing chambers and 01xLamella settling plates tank) of tank capacity / discharge 80000 litre/hour including cleaning of the each inclined settling plates of the clarifier plant by making preparatory arrangement and taking out deposited sludge, soil etc. from the bottom including cleaning inside walls of complete plant with steel wire brush, gunny bags, etc and washing/cleaning and removing sludge, soils etc to a distance not exceeding 50 metre from the pump house campus area, and deposited where directed complete including writting the words \\"Date Cleaned on\\" on the Front/Road side face and including internal painting of complete plant with two coats of primer of red oxide / zinc chrome and one coat of black bituminous paint for the complete inner surface of plant complete all as specified and directed by Engineer in charge
19Material & Labour for cleaning/washing of Ground level storage sump of 20000 gallons capacity after complete pumping out of water from the static tank (Pumpset is own arrangement of the contractor) and removing all dirts/sludge by scraping with steel wire brush/ gunny bags cleaning/ washing thoroughly floor and inner walls with bleaching powder solution and removing sludge/soils etc. to a distance not exceeding 50 metre from pump house campus, including writting the words \\"Date Cleaned on\\" on the Front/Road side face complete all as specified and directed by Engineer in charge.
20Material & Labour for cleaning/washing of Ground level storage sump of 50000 gallons capacity after complete pumping out of water from the static tank (Pumpset is own arrangement of the contractor) and removing all dirts/sludge by scraping with steel wire brush/ gunny bags cleaning/ washing thoroughly floor and inner walls with bleaching powder solution and removing sludge/soils etc. to a distance not exceeding 50 metre from pump house campus, including writting the words \\"Date Cleaned on\\" on the Front/Road side face complete all as specified and directed by Engineer in charge
21Supply, install, jointing & testing CI body sluice valve 250mm bore, class PN-1.6, ISI marked (as per IS-14846 of 2000) heavy duty with flanged ends with high tensile stainless steel spindle, iron hand wheel with a provision of extended stem of not less than 5 mtr in length and fixing with nuts, bolts, washers and rubber gasketsheet for packing including taking out existing us sluice valve fixed at any position complete all as specified and directed by Engineer in charge
22Description all as per item no 21 here in before , but for 150 mm Sluice valve.
23Description all as per item no 21 here in before, but for 100 mm Sluice valve.
24Description all as per item no 21 here in before, but for 80 mm Sluice valve.
25Supply, install, jointing & testing Non Returning Valve 100 mm bore fixing with nuts, bolts, washers and rubber gasketsheet for packing including taking out existing us Non Returning valve fixed at any position complete all as specified and directed by Engr-in-Charge.
26All as per item no. 25 above, but for 80 mm Non return valve.
27Supply, install, jointing & testing cast iron butterfly Valve 150mm bore fixing with nuts, bolts, washers and rubber gasketsheet for packing including taking out existing us cast iron butterfly valve fixed at any position all as specified and directed by Engr-in-Charge.
28Description all as per item no 27 here in before, but for 100 mm Butterfly valve.
29Description all as per item no 27 here in before but for 80 mm Butterfly valve.
30M & L for construction of valve chamber of internal size 120cm x 120cm x 90cm with 23 cm thick wall in CM 1:6 including excavation, earth work in any type of strata / soil & PCC 1:4:8 foundation type D-2, 75 mm thick including 25 mm thick PCC 1:2:4 type B1 in & plastering the internal surface with 10 mm thick cement mortar 1:4 providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with 40x40x5mm angle iron frame duly painted with two coat of black bituminous paint over one coat of red oxide primer and finishing exposed faces of concrete surfaces and plaster surfaces with three coats of white wash including dismantling the existing unserviceable valve pit complete all as specified and directed by Engr-in-Charge.
31M & L for construction of valve chamber of internal size 90cm x 90cm x 90cm with 23 cm thick wall in CM 1:6 including excavation, earth work in any type of strata / soil & PCC 1:4:8 foundation type D-2, 75 mm thick including 25 mm thick PCC 1:2:4 type B1 in & plastering the internal surface with 10 mm thick cement mortar 1:4 providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with 40x40x5mm angle iron frame duly painted with two coat of black bituminous paint over one coat of red oxide primer and finishing exposed faces of concrete surfaces and plaster surfaces with three coats of white wash including dismantling the existing unserviceable valve pit complete all as specified and directed by Engr-in-Charge.
32Supply and fix 150mm bore heavy class GI pipe flange type fixed together by nuts, bolts, washers and rubber gasket etc. including all necessary fittings (bend, tee, short pieces etc.) required for leakproof jointing and laid on wall/floor/ground including testing complete after taking down old u/s GI pipe complete all as specified and directed by Engr-in-Charge.
33Supply and fix 100mm bore heavy class GI pipe flange type fixed together by nuts, bolts, washers and rubber gasket etc. including all necessary fittings (bend, tee, short pieces etc.) required for leakproof jointing and laid on wall/floor/ground including testing complete after taking down old u/s GI pipe complete all as specified and directed by Engr-in-Charge.
34Supply and fixing water pressure gauge of suitable dia measureing pressure of 0 to 20 Kg /cmsq with suitable size of brass sampling and pressure gauge cock (conforming to relevant IS) including necessary fixing accessories complete after taking down old unserviceable pressure gauge complete all as specified and directed by Engr-in-Charge.
35Supply and fix 1/2\\" steel spray nozzle as per sample provided to be used in aeration system of water treatment plant alongwith all necessary fittings as required including taking down old u/s spray nozzles complete all as specified and directed by Engr-in-Charge.
36Supply and fixing of Chlorine feeding / injecting recoil PU pipe of size 10x6.5 mm to be connected from Chlorine dosing system to Venturi system of pressure filter / iron removal plant including all necessary fittings as required on site complete after taking down old u/s chlorine feeding pipe complete all as specified and directed by Engr-in-Charge.
37Supply only Chemical / Reagent O-Toludine (Ortho-Toludine) / OT Solution (500ml) used as a reagent for Chlorine test of potable water complete all as specified.(Note- OT Solution of 500ml quantity will be considered as unit quantity and wiil be measured in A/U of Each only) complete all as specified and directed by Engr-in-Charge.
38Supply and fixing TMT bars 12 to 16 mm dia and over, cut to length, bent to shape required, including welding (SMAW / GMAW /MIG etc.) work complete with structural steel sections like angle, channels, beams etc including dismantling old rusted structural sections complete all as specified and directed by Engr-in-Charge.
39Supply & fixing mild steel Fe 410 -W (Gde- E- 250) quality- A Fe angle iron as in angle, channel, tee-scetion, tie bar, cross arm, bracing, I-section etc. as required and directed including making necessary holes through drilling/ welding/ cutting work for fixing of TMT round bars, nuts, bolts and washers complete including dismantling old old rusted structural sections complete all as specified and directed by Engr-in-Charge. .
40Supply & Fixing plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment cofirming to Fe 410 -W (Gde- E- 250) quality-A complete including dismantling old old rusted structural sections complete all as specified and directed by Engr-in-Charge.
41Supply and fixing mild steel machine made nuts, bolts and washers etc. dia of 16 to 20 mm as required for fixing of various structural steel sections like angle, channels, plate, etc. complete including dismantling old rusted nuts, bolts, washers etc. complete all as specified and directed by Engr-in-Charge. .
42Supply only gear oil suitable for lamella clarifier dozing systemcomplete all as specified and directed by Engr-in-Charge.
43Collecting water sample in clean bottle from location as directed for testing of Physical test, Chemical test & Bacteriological test as per IS-10500-2012 (second revision) from NEIST JORHAT / PHED Dibrugarh or any government recognized institute and submitting test report complete all as specified and directed by Engr-in-Charge.
44M&L for cement concrete 1:4:8, Type D-2 using 40mm nominal size graded crushed stone aggregate in foundation, filling and mass concrete etc. complete all as specified and directed by Engr-in-Charge.
45Supply & Fixing of fully automatic star delta starter sheet metal enclosure of make L&T type MN-25F or equivalent suitable for 15 / 20 HP motor , 440 volt, 3 Phase Electric Motor with Single Phase Protection and motor protection relay feature conforming to IS -60947 after taking down old unserviceable one and fixed to the same location by making electrical connection properly with lugs complete all as specified and directed by Engr-in-Charge.
46Supply & Fixing of DOL (Direct on line) starter sheet metal enclosure of make Havells or equivalent suitable for 01 HP motor , 240 volt, single Phase Electric Motor conforming to IS -60947 after taking down old unserviceable one and fixed to the same location by making electrical connection properly with lugs complete all as specified and directed by Engr-in-Charge.
47Supplying and laying of CPVC pipes SDR-11 & Plain CPVC SDR-11 fittings of outer dia 16mm including taking down old unserviceable pipes complete all as specified and directed by Engr-in-Charge.
48M&L for Servicing / cleaning of Air compressor upto 3 HP rating after disconnecting or opening the drain valve to remove moisture, clean or replace the intake filter by ensuring vents are free from debris, checking the belt tension by ensuring the belt is centered on the pulleys including testing the safety valves, and tightening the fasteners by checking all visible bolts, especially on the head and motor mount fasteners etc. to ensure smooth and efficient functioning of compressor complete all as specified and directed by Engr-in-Charge.
49M&L for disconnecting of defective Air compressor of 3 HP rating from the Pump house installation including taking out burnt 3-phase electric motor and transporting to nearest work shop and rewinding the same by using approved make super enamelled insulation copper wire of suitable insulation class of approriate size after pulling out burnt out copper wires from the slots of stator including replacement of minor accessories and varnishing/heating at heat chamber suitably including testing to get satisfactory result complete including dismantling or separating the unserviceable spare parts of Air Compressor and cleaning the serviceable parts, re-metalling machining, polishing and re-assembling including replacement of old u/s parts with new one paid as supply only items alongwith painting of whole air compressor by applying spray paint technology with two coat of synethetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-charge. (Note:- The following spare items are measured and paid separately.)
50Supply only Liner as per sample complete all as specified and directed by Engr-in-Charge. .
51Supply only Bearing as per sample complete all as specified and directed by Engr-in-Charge.
52Supply only Gear oil suitable for Air compressor as per specification complete all as specified and directed by Engr-in-Charge.
53Supply only Compressor air meter / pressure gauge as per sample complete all as specified and directed by Engr-in-Charge.
54Supply only Air filter element as per sample complete all as specified and directed by Engr-in-Charge.
55Supply only Fan belt as per sample complete all as specified and directed by Engr-in-Charge.
56Supply & Fixing Gun metal / Bronze gate valves, with iron wheel head, suitable for 15mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old u/s valves complete all as specified and directed by Engr-in-Charge.
57Description all as per item No 56 here in before but size of valve suitable for 20 mm bore.
58Description all as per item No 56 here in before but size of valve suitable for 25 mm bore.
59Description all as per item No 56 here in before but size of valve suitable for 40 mm bore.
60Description all as per item No 56 here in before but size of valve suitable for 50 mm bore.
61Taking out from trenches or taking down from wall / floor GI steel tubing and connections, 15 mm bore, setting aside the unserviceable pipe andcomplete all as specified and directed by Engr-in-Charge.
62Description all as per item No 61 here in before but for 20 mm bore of pipe.
63Description all as per item No 61 here in before but for 25 mm bore of pipe.
64Description all as per item No 61 here in before but for 40 mm bore of pipe.
65Description all as per item No 61 here in before but for 50 mm bore of pipe.
66Supply and fixing of 15 mm bore GI tubing, medium grade with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed by Engineer in charge
67Description all as per item No 66 here in before but for 20 mm bore of pipe.
68Description all as per item No 66 here in before but for 25 mm bore of pipe.
69Description all as per item No 66 here in before but for 40 mm bore of pipe.
70Description all as per item No 66 here in before but for 50 mm bore of pipe.
71Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation, etc. or for taking out/laying of CI/GI pipes etc or for shafts,wells, cesspits,manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed by Engineer in Charge
72Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and directed by Engineer in Charge
73Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer in Charge
74Material and labour in replacement DI fittings for double ended flanged pipe such as bends (any type, any radius) tapers any type, Tee, pieces, collars, caps plugs etc from 80mm to 200mm bore dia DI pipes complete all as specified and directed by Engineer in Charge.
75Supply and fix in repairs 100mm dia mettallic cast iron foot valve at the end of GI pipe/PVC pipe with complete fixing accessories under jackwell/river complete all as specified and directed by Engineer in Charge
76Description all as per item no. 75 here in before but for 80mm dia.
77Supply and fix in repairs Injection valve (Line NRV) used in Dosing system having feeding range capacity upto 6 LPH made of PP plastic material complete all as specified and as directed by Engineer in charge
78Supply and fix PVC Suction pipe (heavy duty) of 100mm size with working pressure not less than 3 Kg/cm2 to be connected with existing PVC suction / CI / DI pipe alongwith all necessary fitting & accessories like clamps, nuts, bolts, washers etc. complete including taking down old unserviceable pipe complete all as specified and directed by Engineer in charge Supply and fixing Bib taps fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for GI pipe of size 15 mm complete all as specified and directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58488963
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 27.95 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maint Of Water Treatment Plant At Main Water Point In Zone-Ii & 25 Sect Pump House At Mil Stn Lekhapani Under Ge Dinjan No.2
Basic Detail
Tender No 8016/E8
Bidding Type Tender
Location
City Tinsukia
State Assam
Key Dates
Publish Date 11 Nov 2026
Submission Date 02 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 27.95 Lakhs
Tender Fee 500
EMD 55900
Exemption Available
Document List
0092ec19-b005-4c23-84e9-a408603d5e92.html
BOQ_895479.xls
TENDER1.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
html

0092ec19-b005-4c23-84e9-a408603d5e92.html

xls

BOQ_895479.xls

pdf

TENDER1.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender