Housing Urban and Rular Development Government Departments Closing in 5 days TDR #58488118

Tender For B.O.Q For Constructionof G+2 Reinforced Cement Concrete Framed Structure With Boundary Wall At Ghs Habak Humair, Srinagar B.W.O Electric Work

Issued by Government Departments · Srinagar, Jammu and Kashmir
Tender Value
12.63 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
25279
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for B.O.Q For Constructionof G+2 Reinforced Cement Concrete Framed Structure With Boundary Wall At Ghs Habak Humair, Srinagar B.W.O Electric Work

BOQ

Name of Work:- B.O.Q for Constructionof G+2 RCC framed structure with boundary wall at GHS Habak Humair, Srinagar B.W.O Electric work
Sl. No. Item Description
1Part A (Internal Electrification)
2Wiring for Light point/Exhaust/Bell/Fan Point point with (P+N+E) 3x1.5 sq.mm FRLS-H/HFFR PVC insulated Multi strand Copper conductor single core cable (Polycab Green/Finolex/Salzer/Havells lifeguard Make) in existing surface/recessed Conduits laid in slabs with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified Anti-Bacterial Series of Legrand/L&T/Siemens/ABB Make & shall be approved before execution of work.
3Supplying and Fixing of Indicator as required, ISO/IEC Certified Anti-Bacterial Series of Legrand/L&T/Siemens/ABB Make & shall be approved before execution of work.
4Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required,ISO/IEC Certified Anti-Bacterial Series of Legrand/L&T/Siemens/ABB Make & shall be approved before execution of work.
5Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Polycab Green/Finolex/Salzer/Havells lifeguard Make) Including termination and p/f of Copper thimbles of required size and number on input and out side rolled with colour coded type and p/f of ferriols on i/p and o/p side
6Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified Anti-Bacterial Series of Legrand/L&T/Siemens/ABB Make & shall be approved before execution of work.
7Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in existing surface/Recessed Conduit (Polycab Green/Finolex/Salzer/Havells lifeguard Make) Including termination and p/f of Copper thimbles of required size and number on input and out side rolled with colour coded type and p/f of ferriols on i/p and o/p side
8Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Anti-Bacterial Series of Legrand/L&T/Siemens/ABB Make & shall be approved before execution of work.
9Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS-H/HFFR PVC insulated copper conductor, single core Cable in existing surface/Recessed medium class PVC conduit (Polycab Green/Finolex/Salzer/Havells lifeguard Make) & shall be approved before execution of work. Including termination and p/f of Copper thimbles of required size and number on input and out side rolled with colour coded type and p/f of ferriols on i/p and o/p side
102x10 sq.mm+ 1x6 sq.mm (P+N+E) for Power point Sub main in One run from Main Panel to Distribution Boards.
112x6 sq.mm+ 1x6 sq.mm (P+N+E) for Lighting/AC Point Sub main in One run from Main Panel to Distribution Boards.
122x4 sq.mm+ 1x4 sq.mm (P+N+E) for Inverter Sub main in One run from Main Panel to Distribution Boards.
132x2.5 sq.mm+ 1x2.5 sq.mm (P+N+E) for Lighting Circuit in One run from switch boards to Distribution Boards.
142x1.5 sq.mm+ 1x1.5 sq.mm (P+N+E) for Inverter Circuit in One run from switch boards to Distribution Boards.
15Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required of Legrand/L&T/Siemens/ABB Make
16Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(L&T/Siemens/Legrand/ABB /Schneider/BCH Make)
17Supply/Fixing/Testing and Commissioning of Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (L&T/Siemens /Legrand/ABB/Schneider/BCH Make)
1825-32Amp.
1940Amp.
2063Amp.
21Providing and fixing of bakelite hylam sheets of required size including cutting, filing with S/F screws etc.
22Supplying and Fixing of MCB 6-Way (4+18) horizontal typed , sheet steel, Double Door Distribution Board, TPN 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/ ABB /Schneider/BCH Make)
23ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value.Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job.
24Supply ,Laying of following PVC Conduits with allied accessories ,including cutting of walls /floors with hydraulic cutters and refacing to original position by way of p/l of cement concrete /POP and painting wherever required and as per instructions of EIC (BCH/Polycab/Finolex/Astral Make.
2525 mm dia
2632 mm dia
27Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required, ISO/IEC Certified Anti-Bacterial Series of Legrand/L&T/Siemens/ABB Make
285/6 A switch
293 pin 5/6 A socket outlet
30Supply and fixing of 15 Watt LED Powder coated die cast/Extruded aluminum Body including trim with Aluminum Reflector(System lumen efficacy ≥ 120 lm/Watt ) Recess/surface mounted (Commercial type) downlighter having following specficafications .The luminaire should have a colour temperature of 6500°K, CRI≥80 and SDCM≤5. Luminaire shall be designed to emit initial system lumen output of greater than 2150 lumens .The downlighter shall be back-lit & not side-lit. The driver shall have THD≤10% (@full Load) and PF ≥ 0.95 (@full load). The luminaire housing /body should made of pressure die-cast aluminum. The fixture should comply with the parameters as per IS10322. The luminaire shall have impact resistance of IK02 & ingress protection of IP20. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The luminary shall have average life of 50000 hrs operating temperature -10 C to + 45 C The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab & BIS certificate for LED Luminaire & Driver. The Agency / firm must submit the Technical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 2-years replacement warrenty from OEM for the entire lighting fixtures from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Make: Philips /Wipro /Regent /Endo /Surya/Halonix Make.
31Supplying, installation, Testing & Commissioning of 50 Watt (System lumen efficacy ≥120 lm/Watt) Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMIEMC as per CISPR -15 , lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Wattoutput . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). The Agency / firm must submit the Technical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 2-years replacement warrenty from OEM for the entire lighting fixtures from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Make: Philips /Wipro /Regent /Endo /Surya/Halonix Make.
32Supply/Installation/Testing and Commissioning of BLDC 1200 mm sweep, ceiling fan with 03 No. blades, 30 cm long down rod, 02 No. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Halonix/Havells/Orient Make.(5-Star)
33Supply/Installation/Testing and Commissioning of upto 400mm Shutter Typed,320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB o including connection etc USHA/Anchor/Polycab/Orient/Halonix Make.
34Supply/Installation/Testing and Commissioning of 6-10 Watt. LED Mirror Light ecorative type) fitting of Philips/Bajaj/ Wipro/Jaguar/Panasonic/Havells/Equivalent Make including making of necessary connections including cost of Ceiling Rose,Silken wire also with round plates whether required Etc complete & shall be approved before execution of work.
35Supply & Fixing of AC/DC Bells with its Batteries of Anchor/ /GM / eq, make. Samples shall be approved before execution of work.
36Supply/Installation/Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified.
37Supply/Installation/Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683) suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G,acetylene and electrical fires.
38Supply and Fixing of single pole blanking plates on existing MCB boxes, excluding cost of Boxes.
39Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required of Legrand/Panasonic/Anchor/Schneider/Equivalent Make
40\\"Design, Fabrication, Assembly, Installation, Testing and Commissioning of Front Operated Cubicle type compartmentalized as per form 3B free standing, dust and vermin proof (IP 42ingress protection) LT panel suitable for use of 415 volts, 3 Phase 4 wire 50Hz suitable for a fault level of 55kA at 415 volts, fabricated from 2 mm thick Powder coated paint finish of approved shade CRCA MS sheet with hinged, gasketted9 metal based neoprene) and lockable doors having structural reinforcement with suitable angle/ channel/T / Flat section incl gland plates as required and lifting hooks with sleeved TPN AL Bus bars and Copper strip of required size with 2 no earthing terminals complete with interconnections as required for MCB's and control wiring. Each incoming / outgoing breakers shall have thermal magnetic release. :1.Incomer:-(a) 160 Amp TPN MCCB breaking capacity 36 kA with thermal release and adjustable settings with extended terminals of L&T/ABB/Seime /Legrend Make = 01 No. (b) 01 Set of R,Y,B Phase indicating lamps.(c) 01 No MFM with 630/5CT coils.(d) 200 Amp TPN Aluminum Bus Bar set with colour coding each sleeves 2. Generator Incomer:63/100 Amp Four Pole Change over Switch of Legrand/Siemens/ABB//LK make = 1 No., 200 Amp Bus bar Al Strips(3+1) = 1 Set, Digital Voltmeter =1 No., Digital Ammeter = 1 No., CT coils for Ammeter 300 / 5A = 1 set, phase indicators =1 setOutgoing :-(a) 32 Amp D.P MCB (1OKA) of L&T/ABB/Seimens /Legrend Make = 06 No. (b) 40 Amp D.P MCB (1OKA) of L&T/ABB/Seimens /Legrend Make = 06 No. (c) 63 Amp D.P MCB (1OKA) of L&T/ABB/Seimens/Legrend Make = 06 No. Panel shall have provision for entry of cables from the bottom as required.The Panel manufacturing unit should be CPRI Registered with latest ammended IEC / IS 61439 and the Contractor has to submit the test certificate of main switch gear's and Drawing's of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards ) & is to approved by Department not less than the rank of SDO before manufacturing of panel.
41Supplying, Fixing of 16 Amp,3-Pin Top for Inverter I/p & O/p of Havells/Anchor/Wipro/Bajaj/GM Make
42Supply/Installation/Testing/Commissioning of 3.5-4.5KVA/48 V Pure Sinewave Solar Inverter With ISOT Technology, Intelligent Load Sharing & BIS Certified (with 2-Year Warranty), 04 No. of 150Ah,12V Tubular battery (with 36 Months Warranty) & Suitable Trolley Support for Inverter resting & resting of Tubular Battery etc Luminious/EXIDE/AMRON Make.The job includes SITC of 05KVA Digital Voltage Stabilizer having input range from 90V of Chinar/LivGuard/Cosco Make.
43Providing and Laying of shock proof rubber mats of 2mx1mx12mm thick in size of Standard Make.
44Supply/Laying/Testing and Commissioning of 3.5- Core 70 mm sq. Al armored XLPE Insulated,PVC cable Havells/Polycab/RR Kabel/Paramount/KEI Make. The cable shall include end termination lugs with its crimping /taping.(Only required quantity shall be executed)
45Supply/Laying of HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation where required and refilling the trench of standard make as approved.
46Supplying, Fixing of 16 Amp,3-Pin Top for Inverter I/p & O/p of Havells/Anchor/Wipro/Bajaj/GM Make Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58488118
AUTHORITY Government Departments
TENDER VALUE 12.63 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for B.O.Q For Constructionof G+2 Reinforced Cement Concrete Framed Structure With Boundary Wall At Ghs Habak Humair, Srinagar B.W.O Electric Work
Basic Detail
Tender No NIT No.218/2026-27 Dt 11/11/2026
Bidding Type Tender
Location
City Srinagar
State Jammu and Kashmir
Key Dates
Publish Date 11 Nov 2026
Submission Date 27 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value 12.63 Lakhs
Tender Fee 600
EMD 25279
Exemption Not Available
Document List
83cf2617-1b08-449c-a7f2-5e3bbce071f3.html
BOQ_1123203.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

83cf2617-1b08-449c-a7f2-5e3bbce071f3.html

xls

BOQ_1123203.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender