Educational and Research Institute Boards / Undertakings / PSU Closing in 9 days TDR #58488103

Tender For Providing Paver Block, Aluminium Partition And False Ceiling Arrangements For Construction Of 4 Class Rooms, 8 Lab, Workshop And Toilets Block In Thanthai Periyar Government Institute Of Technology At Vellore In Vellore District.

Issued by Boards / Undertakings / PSU · Vellore, Tamil Nadu
Tender Value
14.69 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
14700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Paver Block, Aluminium Partition And False Ceiling Arrangements For Construction Of 4 Class Rooms, 8 Lab, Workshop And Toilets Block In Thanthai Periyar Government Institute Of Technology At Vellore In Vellore District.

BOQ

Name of Work:- Providing Paver block, aluminium partition and false ceiling arrangements for Construction of 4 class rooms, 8 Lab, workshop and toilets block in Thanthai Periyar Government Institute of Technology at Vellore in Vellore District.
Sl. No. Item Description
1Supplying and filling of gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Departmental Officers with standard specification.
2Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) 250 mm thick, including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory Soil Compactor to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as pwe clause 406 of MORTH Rev-5 etc., complete as directed by the Departmental Officers with standard specification.
3Supplying and laying of Interlocking Rubber moulded Hydraulic pressed paver block Stone 83mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and labour charges etc., complete as directed by the Departmental Officers with standard specification.
4Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of single leaf fully panelled sliding door with 12mm thick bothside prelaminated partile board at the Shutter bottom rail:[email protected] kg/m,Top & Verticle 50x44.45x2.50mm @ 1.292 kg/m,Lock rail 50x44.45x2.50mm @ 1.292 g/m, Running channel section:50x44.45x2.50mm @1.292 kg/m, and necessary accessories such as Alu.clips 17.15x17.27x1.50mm @ 0.176 kg, Alu handle 100x30mm @ 0.988 kg/mfull length of handles on both sides, lock, roller, including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and waking hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc. complete. All the Alu. sections are to be anodised.with matt finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc.,
5Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use on works etc., complete as directed by the Departmental Officers with standard specification.
6Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick) etc., complete as directed by the Departmental Officers with standard specification.
7Providing Cornice Work for Gyp Board False Ceiling etc., complete as directed by the Departmental Officers with standard specification.
8Supply and fixing of 24W LED 2X2 square type Recessed fitting with LED(Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminate to the fitting etc., complete as directed by the Departmental Officers with standard specification.
9PVC Insulated single core multi strand fire retardant low smoke (FRLS) Flexible copper cable with ISI mark conforming to is 22/0.3 (1.5 sqmm) etc., complete as directed by the Departmental Officers with standard specification.
10SUB TOTAL
11GST @ 18 % Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58488103
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 14.69 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Higher Education Commission
Work Description Tender for Providing Paver Block, Aluminium Partition And False Ceiling Arrangements For Construction Of 4 Class Rooms, 8 Lab, Workshop And Toilets Block In Thanthai Periyar Government Institute Of Technology At Vellore In Vellore District.
Basic Detail
Tender No 16TEDV/2026-27
Bidding Type Tender
Location
City Vellore
State Tamil Nadu
Key Dates
Publish Date 12 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 14.69 Lakhs
Tender Fee Ref. Documents
EMD 14700
Exemption Not Available
Document List
73a322ab-0375-468c-ae37-9c23ed5bc820.html
BOQ_870445.xls
Tendernotice_1.pdf
TPGIT4CRTenderconditions.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

73a322ab-0375-468c-ae37-9c23ed5bc820.html

xls

BOQ_870445.xls

pdf

Tendernotice_1.pdf

pdf

TPGIT4CRTenderconditions.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender