Housing Urban and Rular Development Local Bodies Closing in 9 days TDR #58488019

Tender For Repairs To Cyclone Centre Building @ Thirumullaivasal Panchayat In Kollidam Block

Issued by Local Bodies · Mayiladuthurai, Tamil Nadu
Tender Value
25 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
9 days left
EMD
25000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mayiladuthurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repairs To Cyclone Centre Building @ Thirumullaivasal Panchayat In Kollidam Block

BOQ

Name of Work:- Repairs to Cyclone Centre Building @ Thirumullaivasal Panchayat in Kollidam Block
Sl. No. Item Description
1Repairs to Cyclone Centre Building @ Thirumullaivasal Panchayat in Kollidam Block
2Dismantling and removing the Damaged plastering surface and clearing the unused materials away from the site as per specifications etc complete.W-0103 P.NO 34
3Brick partition walls using country bricks of size 83/4\\"x41/4\\"x23/4\\" etc., complete.
4Plastering in CM 1:5 , 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.
5Roof Ceiling Plastering
6Chipping of Concrecte and roughening the surface( m-0036)
7Ceiling Plastering in CM 1:3 , 10mm thick including cost and conveyance of all materials and all labour charges etc., complete.
8Floor Finishing
9Dismantaling of damaged weathering course with pressed tiles including cost conveyance of all etc complete W-0037
10Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
11Providing and laying finishing with one course of pressed tiles of size 20x20x2 cm including cost and conveyance of all materials to work site and all labour charges for watering, curing and all other incidental charges etc., complete.
12Dismantaling of damaged floor finish & Dadooing Walls in Cement Mortor with Mosaic tiles/Glazed tiles/clay tiles Cuddapah slab including cost conveyance of all etc complete W-0042 p.NO 31
13Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
14Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
15Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.
16Dadooing of walls with colour glazed tiles of size300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.
17Door Repairs/Replacement
18Fixing of Steel window of size (1.20 X 1.20) as per specifications etc complete
19fixing of Steel Ventilators of size (.45 X .60 m ) as per specifications etc complete wd-m 1489
20Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.
21Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
22Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
23Painting two coats with ready mix paint of approved colour and trade for doors & windows including cost and conveyance of all materials and all other labour charges etc., complete.
24Sub Estimat Elders sitting slab
25Brick work in C.M 1:5 mix using country bricks of size 83/4” x 41/4 \\" x 21/4\\" , including cost and conveyance of all materials to worksite, including labour for watering with good water within 200m Lead for good water, including all labour and all other incidental charges etc. complete for UP TO BASEMENT.
26Reinforced Cement Concrete 1:11.5:3 mix using 20mm ISS size HBG metal from approved quarry, including cost and conveyance all materials to worksite including labour for mixing, laying, watering with in 200m lead for good water, compacting the concrete including all labour for forming formwork and centering charges etc.,
27Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc.,
28Supply and fabrication of steel including cost and conveyance of steels from godown to work site including labour for cutting, jointing and welding if necessary including labour for tieing with binding wire and labour for placing in position as directed by departmental officers, including all labour and all other incidental charges etc., complete for all RCC items.
29Plastering with Cement Mortar 1:5, 12mm thick including cost and conveyance of all materials to worksite, and all labour for watering, curing and all leads for good water including cost of form work, and all labour and all other incidental charges etc. complete.
30Sub Estimate Baby feeding Room
31Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work M-0390 P.N0 84
32Supplying and fixing of door shutter using MDF board of exterior grade both sides prelaminated of 35mm thick for double leaf door of size 1.00x2.10m
33provision for Secren with satinless steel handle
34Sub Estimate Repairs toilet
35Dismantling and removing the Damaged plastering surface and clearing the unused materials away from the site as per specifications etc complete. W-0104 P.NO 34
36Dismantling Floor finish &dadooing walls in Cement mortor with Mosaic tiles /Glazed tiles /clay tiles etc complete W-0042 P.NO 31
37Dismantling Floor finish &dadooing walls in Cement mortor with Mosaic tiles /Glazed tiles /clay tiles etc complete W-0042 P.NO 31
38Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
39Supplying and fixing in Steel door of approved qualitiy including all labour charges etc complete .75x2.10
40Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.
41Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
42Painting two coats of Old plastered wall surface with Oil Bound Distemper paint of first class quality and approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plaster of pairs putty, wherever required etc complete complying with standard specification
43Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plaster of pairs putty, wherever required etc complete complying with standard specification
44Supplying and fixing in position of Indian Type water closet 580x440mm of approved qualitiy
45PVC Storage tank including all charges etc complete
46Sub Estimate Borewell
47Drilling of 140/ 150mm dia pilot borewell using calyx rigs WD-W0834 P:No 222 sor 2025-2026
48Reaming from 200 mm dia pilot borewell to 300mm dia WD-W-0835 p:no 222
49Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board p.no:201 WD -W0836
50Charges for developing the bore well with air compressor of 300 cfm p:no 223 WD-W0839
51Supply and delivery of 200 mm OD PVC Plain casing pipes 6 KSC P:NO 5 WD-M-0030
52Supply and delivery of 200mm PVC end cap p:no 11 WD-M0115
53Supply and delivery of 65 mm UPVC COLUMN pipe 6Ksc P.n-8 WD-M0052
54Supply and delivery of 65mm PVC end cap p:no 11 WD-M0115
55Supply and delivery of 63 mm PVC Elbow pipe 6Ksc P.n-10 WD-M0112
56Supply and delivery of 65 mm GI Elbow p.no;36 M-0594
57Supply and delivery of 65 mm GI Pipe P;no 30 M-0490
58Supply and delivery of 65 mm GI Coupling P.NO:32 WD-M-0596
59Supply and delivery of 65 mm GI Bend P.NO:36 WD-0602
60Supply and delivery of 50 mm dia GM Gate valve p:no 37 m-0618
61Supply and delivery of 65 mm dia GI Flange set p:no 36 M-0597
62Solvent Cement
63Supplying 1 HP Submerssible pump with ISI make including cost and conveyance of all materilas and labour charges etc complete as per standerd specification M-0871 Page No:-226
64Supply and delivery of 4sqmm Submerssible cable P:NO 140 M-1975
65150 mm ms clamp set WD -M0617 P.NO32
66Bore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) P.no :215 WD-W0738
67Labour charges for the erection of Mono block pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. P:NO:225 W-0855
68Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.25)
69Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64)
70Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70
71Sub Estimate Rain water harvesting
72Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and consolidated and depositing the surplus earth in all places shown by the departmental officers with inital leads and lifts, etc. Including leveling the sites complete complying with standard specifications and as directed. In sand or other loose soil, wet sand not under water, silt, light black cotton soil, sandy loams and ordinary soil. TNBP SS NO 20B 23 & 24
73Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
74Supplying and filling with20mm HBG metal including cost and conveyance of metal to work site including all labour charges for filling etc., complete.
75Supplying and filling with 40mm HBG metal including cost and conveyance of metal to work site including all labour charges for filling etc., complete.
76Supplying and fixing RCC Rings of inner dia 90cm including cost and conveyance including all labour charges for laying etc., complete.
77110mm OD PVC Pipe 6kg
78110mm Pvc Door bend
79110 mm dia PVC Tee
80Wooden plug clamp and screw set m-0517
81Plumber I Class 1 No.
82Sub Estimate Electrification
83Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.20)
84WT Bulk head fitting sd 83
85Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC plug point (SD No.38) 5 pin plug point
86supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106
87Supply and fixing of tube light fitting including angle holder.SD 88
88Supply and Fixing 18 w cfl in the existing light point SD 83
89Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125)
90Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70
91Supply and Fixing of 16 Amps DP Switch of 500V with Metal Clad with Fuse and Neutral SD 142
92SD 64
93SD 69
94Sub Estimate Sanitary Arrengements
95110mm Pvc pipe 6 KG WD-M-0013 P.no 5
9675mm Pvc pipe 6 KG WD-M0010 P.NO 5
97110mm Pvc bend WD-M-0107 P.NO 11
98110mm Pvc elbow WD-M0112 P.NO 11
99110mm Pvc Tee WD-M0113 P.NO 11
10075 MM PVC ELOW WD-M0112 P.NO 11
101110mm Pvc Tee WD-M0113 P.NO 11
10220 MM Pvc pipe( M-0875) VOLLUME 1 P.NO 18
10325 MM Pvc pipe( M-0876) VOLLUME 1 P.NO 158
10425 MM TEE (M-0900) P.NO 160
10520 MM TEE(M-0899) P.NO 160
10625 MM BEND(M-0894) P.NO 160
10720 MM BEND(M-0893) P.NO 159
10820 MM ELBO (M-0887) P.NOI 159
10925 MM COUPLER(M-0882) P.NO 159
110Shellac(M-0518) P.NO 91
111UPVC Adhesive m-0520 P.NO 92
1121000 litres water tank m-0540 P.NO 92
11325mmGI pipe m-0437 P.NO 87
11425mmGI Tee m-0461 P.NO 88
11525mmGI Bend m-0455 P.NO 88
11625mm GI Elbow m-0449 P.NO 88
11725mm GI Bend m-0455 P.NO 88
118PVC Screw Down tap 20 mm dia M-0511 P.NO 91
119Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
120Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone M.Sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M.Sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
121Supplying and fixing in position of Indian Type water closet 580x440mm of approved qualitiy
122Supplying laying and jointing PVC specials etc., complete
123Provision for Name board
124GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58488019
AUTHORITY Local Bodies
TENDER VALUE 25 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Repairs To Cyclone Centre Building @ Thirumullaivasal Panchayat In Kollidam Block
Basic Detail
Tender No 2337/2025/A2 Dt 11.11.2025
Bidding Type Tender
Location
City Mayiladuthurai
State Tamil Nadu
Key Dates
Publish Date 12 Nov 2026
Submission Date 02 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 25 Lakhs
Tender Fee Ref. Documents
EMD 25000
Exemption Not Available
Document List
25b6fbba-8090-4484-8dbd-c7571f15f341.html
BOQ_870599.xls
pricebid.pdf
techbid.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

25b6fbba-8090-4484-8dbd-c7571f15f341.html

xls

BOQ_870599.xls

pdf

pricebid.pdf

pdf

techbid.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender