Tender For Maintenance Works To Mini Power Pump,Open Well Motor,Toilet Motor,Market And Bus Stand Motor At Municipal Town Ward 19 To 36
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
15 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Works To Mini Power Pump,Open Well Motor,Toilet Motor,Market And Bus Stand Motor At Municipal Town Ward 19 To 36
BOQ
| Sl. No. | Item Description |
| 1 | Labour charges for removing and refixing the compresser motar (Ouotation) |
| 2 | Labour charges for removing the existing borewell HDPE pipe Refixing and erection of HDPE Pipes (Ouotation) |
| 3 | Rewinding the 1.50HP& 2.00HP compressure motar coil including costof burint coil including all labor charges etc complete1.5HP Rewinding charges (Ouotation) |
| 4 | 2.0HP Rewinding charges (Ouotation) |
| 5 | Supply and fixing of motar and compresser Specials S&Fcenter shaft Bearing (Ouotation) |
| 6 | S& F Motar centrifical switch (Ouotation) |
| 7 | S&F 25mft Running condenser (Ouotation) |
| 8 | 120-150mft starting condencer (Ouotation) |
| 9 | 200-250mft starting condencer (Ouotation) |
| 10 | Motar center Bearing (Ouotation) |
| 11 | Connecting rod (Ouotation) |
| 12 | Pisten set (Ouotation) |
| 13 | A38(1.5HP Compresser ) (Ouotation) |
| 14 | B48(2.0HP Compresser) (Ouotation) |
| 15 | Oil (Ouotation) |
| 16 | Supply and fixing pipe and specials ( Bore well pipe and specials ) TWAD & PWD SOR 2025-26 25mm Pvc pipe (10 kg. per cm2) (M-0876) |
| 17 | 32mm pvc pipe (10 kg. per cm2) (M-0877) |
| 18 | 15mm G.I pipe AS PER IS 1239/PART I/2004 (WD-M0484) |
| 19 | 20mm G.I pipe AS PER IS 1239/PART I/2004 (WD-M0485) |
| 20 | 25mm G.I pipe AS PER IS 1239/PART I/2004 (WD-M0486) |
| 21 | 32mm G.I pipe AS PER IS 1239/PART I/2004 (WD-M0487) |
| 22 | 20mm GM Gate Valve AS PER IS BS 5154 (WD-M0618) |
| 23 | 25mm GM Gate Valve AS PER IS BS 5154 (WD-M0618) |
| 24 | 32mm GM Gate Valve AS PER IS BS 5154 (WD-M0618) |
| 25 | 25mm GI Elbow AS PER IS 1239/PART II (WD-M0594) |
| 26 | 32mm GI Elbow AS PER IS 1239/PART II (WD-M0594) |
| 27 | 32mm G.I tee AS PER IS 1239/PART II (WD-M0595) |
| 28 | 1\\"x1/2\\" Bottom unit (Ouotation) |
| 29 | 1/2\\" Hose Joint (Ouotation) |
| 30 | 1\\" Hose Joint (Ouotation) |
| 31 | 32mm HDPE Pipe Class-5 (1 MPa or 10 kg./cm2 pressure) (M-1056) |
| 32 | 25mm HDPE pipe Class-5 (1 MPa or 10 kg./cm2 pressure) (M-1055) |
| 33 | 20mm HDPE pipe Class-5 (1 MPa or 10 kg./cm2 pressure) (M-1055) |
| 34 | Brass Chromium Plated Screw Down Tap 15 / 12mm dia (M-0508) |
| 35 | Supply of 2000 Liter capacity PVC tank with ISI specification cost of material including all labor charges etc complete with standared specification.,, (WD-M1419) |
| 36 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth values erection clamps, pressure gauges upto the exterior wall of pump room and erection of pannel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. up to 5HP Submersible motor (WD-W0871) |
| 37 | Rewinding the 5.00HP Submersible motar coil including costof burint coil including all labor charges etc complete Submersible motor (Ouotation) |
| 38 | Supply and fixing of 4.00 Sq.mm PVC insulated and sheathed 3core flat type copper cable confirming to IS 694/1990 for including all cost etc., complete (WD-M1975) |
| 39 | Supply and fixing of Sub motor 3phase starter including all cost etc complete., (Ouotation) |
| 40 | Supplyandrunof4of4sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeconcealedinwallandceilingwithcontinuousearthwireconnectionof4sq.mmcopperwireandmakinggoodof the concealed portion with suitable colour (SD-61) |
| 41 | Supply,delivery and fixing of 1.5Hp Compressor motor with ISI specification cost of material including all labor charges etc complete with standared specification.,, (Ouotation) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender