Tender For Providing Additional Borewell Arrangements For The Work Of Womens Hostel For 100 Persons In Alagappa Chettiyar Government College Of Engineering And Technology At Karaikudi In Sivagangai District.
Tender Value
6.89 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
8 days left
EMD
6900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Additional Borewell Arrangements For The Work Of Womens Hostel For 100 Persons In Alagappa Chettiyar Government College Of Engineering And Technology At Karaikudi In Sivagangai District.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of 150mm dia Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site including construction of mud pit. |
| 2 | Upto 60 m Depth ending below ground level |
| 3 | From 60 m upto 90 m Depth ending from ground level |
| 4 | From 90 m upto 120 m Depth ending from ground level |
| 5 | Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the Deparrtemntal Officer. |
| 6 | For Borewell up to 60m |
| 7 | For Borewell up to 60m to 90m |
| 8 | For Borewell up to 90m to 120m |
| 9 | Supply of PVC 150mm CM Casing pipes As Per IS 12818 / 2010 |
| 10 | Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots)in the drilled hole including jointing the pipeswith PVC Couplers with Cement paste etc.,complete, supply and packing the annularspace with pebbles of size and quality as approved by the executive engineer. |
| 11 | Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by Departmental Officers and conducting yield test by ‘V’ notch method . |
| 12 | Supplying and erecting 3 phase 3 HP submersible pumpset 150mm dia borewell at a duty of 75 lpm x 225m of ISI make with necessary accessories including Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days and as directed by the departmental officers |
| 13 | Supply and fixing of Three Phase Panel Board for the Pumpset including Labour charges. |
| 14 | Supply of 65mm MS Clamp of 0.75m length ,with bolt and nuts of heavy type as directed by the departmental officers etc., complete. |
| 15 | Supply of 40mm HDPE pipe for submersible pump of best quality including cost of coupling as directed by the departmental officers etc., complete |
| 16 | Supply of 4 sq.mm. three core flat copper cable for submersible motor pump with wire bounded punched copper conductor insultaed and sheathed with PVC with voltage grate upto 1100v conforming to and marked with IS(694-1990) complying with standard etc., complete. |
| 17 | Supply and delivery of Nylon rope of 20mm dia for holding the submersible pupmset and HDPE pipe etc., complete. |
| 18 | Supply and fixing Borewell End cap of 140mm dia |
| 19 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the 40mm Dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply Below ground level .40mm dia UPVC pipe. |
| 20 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valvewith BIS make of the 40mm dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 21 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender