Educational and Research Institute Local Bodies Closing in 7 days TDR #58487796

Tender For Providing Generator Shed, Vsat Platform & Water Supply Arrangements For The Work Of Construction Of Prefabricated Workshop Building For Centres Of Excellence In Alagappa Government Polytechnic College At Karaikudi In Sivagangai District.

Issued by Local Bodies · Sivaganga, Tamil Nadu
Tender Value
6.24 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
7 days left
EMD
6250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Generator Shed, Vsat Platform & Water Supply Arrangements For The Work Of Construction Of Prefabricated Workshop Building For Centres Of Excellence In Alagappa Government Polytechnic College At Karaikudi In Sivagangai District.

BOQ

Name of Work:- Providing Generator shed, VSAT platform & water supply arrangements for the work of Construction of Prefabricated Workshop building for Centres of Excellence in Alagappa Government Polytechnic College at Karaikudi in Sivagangai District.
Sl. No. Item Description
1Earthwork Open Excavation by manual means in all soils and sub soil and to full depth as may be directed except in rock requiring blasting but inclusive of baling out water wherever necessary and depositing the earth within the compound in places shown by departmental officers with an initial lead of 10 metres and lift of 2 metres clearing and levelling the site etc. complete complying with standard specification.
2Cement concrete of mix 1:5:10 (One cement, five sand and ten aggregate) using 40mm size ISS gauge hard broken granite stone for foundation including all incidental charges dewatering if found necessary and laid in layers of not more than 15cm thick, finishing and curing as directed by the Departmental Officers complete complying with standard specification.Mixing by manual means.
3Brick work in 1:5 Cement Mortar using best quality Fly ash Brick of size 230x110x75mm conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.
4For foundation and Basement
5For Ground floor
6Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means
7For Foundation and Basement
8Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c, etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
9Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)
10Plastering with cement mortar 1:3 (One cement and three sand) 12mm thick using water proofing compound of approved quality at 2% by weight of cement used including finishing and curing as directed by the Departmental Officers complete complying with standard specification.
11Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including finishing and curing as directed by the Departmental Officers complete complying with standard specification.
12Providing granolithic floor finish of 40mm thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
13Supplying and fixing mild steel grill /door of various sizes including required steel outer frames conforming to ISI.specifications and as per the designs furnished and as directed by the Departmental Officers, including one coat of red oxide primer.The rate is inclusive of cost of all materials, taxes,labour charges, for fabrication,welding charges, finishing, assemble condition at site, fixing in position including dismantling the masonry making necessary holes in masonry wherever necessary to the extent required redoing the same to the original condition and after fixing complete complying with standard specification.(Payment will be made based on the actual weight supplied)
14Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
15Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Three coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
16Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.
17Supplying and fixing 40mm dia GI pipe for including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers
18Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the 32mm dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
19Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level
2032mm upvc pipe.
2140 mm upvc pipe.
22Supplying and Fixing of PVC ready made water tank of approved quality with standard specification and best brand including testing for leakages after making installations and connections. The cost inclusive of lid and lock with bolt and nuts for PVC tank, transportation, loading, unloading, lifting, installation and necessary connections etc., complete complying with standard specifications and as directed by the departmental officers.(The PVC Water Tank should be got approved by the Executive Engineer before use on works).
23Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
24Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements Since the labour for cutting, pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed
2532mm upvc Elbow.
2632mm upvc Tee.
2732mm upvc Coupler.
2832 mm x 25 mm Dia upvc Reducer.
29Supplying, laying and jointing PVC soil pipes of approved and best varietyconforming to IS.Specification with ISI.mark of the following sizes including, cutting and threading of PVC.Pipes, fixing specials but excluding cost of such specials but including fixing to wall with necessary teak wood plugs, PVC.clamps and screws making holes on the wall (or) drilling holes in roof and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.The PVC.Pipes should be got approved by the Departmental Officers before use on work. Below ground level.
30110mm dia PVC soil pipe.
31GST Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58487796
AUTHORITY Local Bodies
TENDER VALUE 6.24 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Department Of Higher Education
Work Description Tender for Providing Generator Shed, Vsat Platform & Water Supply Arrangements For The Work Of Construction Of Prefabricated Workshop Building For Centres Of Excellence In Alagappa Government Polytechnic College At Karaikudi In Sivagangai District.
Basic Detail
Tender No 3.1 2026 27 Dated 11.11.2026
Bidding Type Tender
Location
City Sivaganga
State Tamil Nadu
Key Dates
Publish Date 11 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 6.24 Lakhs
Tender Fee Ref. Documents
EMD 6250
Exemption Not Available
Document List
1eaf2b8e-f9c6-491c-bb2f-65b0382bcc15.html
BOQ_870037.xls
TenderConditionDiversionVSAT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

1eaf2b8e-f9c6-491c-bb2f-65b0382bcc15.html

xls

BOQ_870037.xls

pdf

TenderConditionDiversionVSAT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender