Tender For Special Repairs In False Ceiling Repairs In The Ii Additional District Court And Plastering,Partitions And Internal Arrangements For Establishing The Special District Court For Trial Of Cases Under The Pocso Act,2012 And Two Car-Shed Shutt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
5 days left
EMD
3100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs In False Ceiling Repairs In The Ii Additional District Court And Plastering,Partitions And Internal Arrangements For Establishing The Special District Court For Trial Of Cases Under The Pocso Act,2012 And Two Car-Shed Shutters And The Judges Entrance Gate In The Combined Court Complex At Tiruppur And Installation Of Incinerator.
BOQ
| Sl. No. | Item Description |
| 1 | Clean removal of damaged CEMENT PLASTER from the wall surfaces etc.,cpmplete as directed by the departmental officers as per standard specification. |
| 2 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers.All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. |
| 3 | Supplying, fabricating and fixing inposition Aluminium anodised natural colour matt finish fixed ventilator of size 1.80mx0.60m in all floors with Aluminium section of Outer frame: 24x33x3mm @0.546kg/m,Centre mullion :[email protected] kg/m,Alu. Clips: 17.27x17.15x1.40mm @0.175kg/m and with necessary accessaries such as rubber beading and fixing 4mm thick plain glass including cost of all materials, labours, power consumptions required for fabrication, drilling holes in RCC column, slab, masonry walls wherever necessary with power drills to the required extent and work good to be original condition after fixing and also as directed.All the Aluminium section are to be anodised with matt finish under electrically controlled conditions in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc. complete. |
| 4 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed plastic Interior Emulsion of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 5 | Supplying, fabricating, erecting and fixing Hilux Board Plain Sheets (10mm thick) or Equivalent False Ceiling upto a ceiling height of 4.5m from floor level 5 as directed by the department officers. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance Etc. complete complying to standard specication. |
| 6 | Providing Cornice Work for Gyp board False Ceiling etc., complete complying with standard specifications and as directed by departmental Officers. |
| 7 | Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,- Manually operated (up to 8 m2 area) |
| 8 | Supplying and fixing of Incinerator for Ladies Bathroom.The cost is inclusive of including all labour charges and conveyance etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 9 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender