Public Administrative Department Government Departments Closing in 1 days TDR #58487721

Tender For Annual Plan-Pudur Grama Panchayath 2026-27 Pro.No:185 Ward No:14-Anakkal Chudalakkadu,Banglakkadu, Kizhakke Michabhoomi, Gundukkal Kudivella Padhathi-General Civil Work-1

Issued by Government Departments · Palakkad, Kerala
Tender Value
12.57 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
1 days left
EMD
31438
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Annual Plan-Pudur Grama Panchayath 2026-27 Pro.No:185 Ward No:14-Anakkal Chudalakkadu,Banglakkadu, Kizhakke Michabhoomi, Gundukkal Kudivella Padhathi-General Civil Work-1-1 CHUDALAKADU KUDIVELLA PADHATHI1.001 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete1.002 5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)1.003 5.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining1.004 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)1.005 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)1.006 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns1.007 OD153694/2026-2027:Supplying and erecting open well submersible pump with motor using best quality, ISI marked motor and pump to suit well , including cost of column pipe (UPVC), UG cable, nylon rope,and all others fitting to including panel board ect and all changes for conveyance of materials , labour,and cost of wiring (KSEB changes for electrical connection paid separately) ect. complete.1.008 51.18.12.7:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) <br> External work - 65 mm nominal dia1.009 OD153394/2026-2027:Providing and fixing HDPE pipes including jointing of pipes with , trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 10kg 63 mm dia HDPE Pipe PE 100 as per IS 4984/1995 modified as 50 .18.9.4.2 1.01 51.18.12.1:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately)<br> External work - 15 mm dia nominal dia,1.011 OD153464/2026-2027:od 1333813/2021-2022: Supplying and fixing foundation post with 20 mm GIpipe and tap including all special etc complete1.012 OD154294/2026-2027:Supply and erection of readymade ferrocement pumphouse of size 1.50x1.50x2.10m as per specification.Rcc post shall be fixed in PCC 1:3:6 of size 45x45x45cm,foundation alround with solid block masonry with CM1:6 of 30x40cm, size ferrocement wall of 1.50mx2.10m of thickness 25mm, ferrocement traingular type roof made of ferrocement slab of thickness 25mm,MS door of size 75x210cm with 1mm thick MS sheet and suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable locking arrangement and a pad lock of 5 lever MS ventilator of size 60x45cm, flooring with CC 1;4;8, 75mm thick and plastered over 12mm thick cement plaster 1;4 and neat cement flushing coat and wall surfaces and roof shall be painted with two coats of exterior emulsion paint over coat of primer.1.013 18.19.4.2:Providing and fixing gun metal non-return valve of approved quality (screwed end): 50 mm nominal boreVertical1.014 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil1.015 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more1.016 10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works1.017 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.1.018 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)2 KIZHAKE MICHABHOOMI UNATHI KINAR NIRMANAM2.001 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil2.002 2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil2.003 5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)2.004 5.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining2.005 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more2.006 10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works2.007 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete2.008 OD155242/2026-2027:Supplying and erecting open well submersible pump with motor using best quality, ISI marked motor and pump to suit well , including cost of column pipe (UPVC), UG cable, nylon rope,and all others fitting to including panel board ect and all changes for conveyance of materials , labour,and cost of wiring (KSEB changes for electrical connection paid separately) ect. complete.2.009 51.18.12.2:Providing and fixing G.I. pipes complete with G.I. fittings (cost of fittings to be paid separately) <br> External work - 20 mm nominal dia2.01 18.12.6:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore2.011 18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore2.012 50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm22.013 OD155223/2026-2027:od 1333813/2021-2022: Supplying and fixing foundation post with 20 mm GIpipe and tap including all special etc complete2.014 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

BOQ

Name of Work:- Annual Plan-PUDUR GRAMA PANCHAYATH 2026-27 Pro.No:185 ward No:14-ANAKKAL CHUDALAKKADU,BANGLAKKADU, KIZHAKKE MICHABHOOMI, GUNDUKKAL KUDIVELLA PADHATHI-General Civil Work-1
Sl. No. Item Description
1CHUDALAKADU KUDIVELLA PADHATHI
250.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
35.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)
45.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining
57.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
64.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
74.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
8OD153694/2026-2027:Supplying and erecting open well submersible pump with motor using best quality, ISI marked motor and pump to suit well , including cost of column pipe (UPVC), UG cable, nylon rope,and all others fitting to including panel board ect and all changes for conveyance of materials , labour,and cost of wiring (KSEB changes for electrical connection paid separately) ect. complete.
951.18.12.7:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) <br> External work - 65 mm nominal dia
10OD153394/2026-2027:Providing and fixing HDPE pipes including jointing of pipes with , trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 10kg 63 mm dia HDPE Pipe PE 100 as per IS 4984/1995 modified as 50 .18.9.4.2
1151.18.12.1:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately)<br> External work - 15 mm dia nominal dia,
12OD153464/2026-2027:od 1333813/2021-2022: Supplying and fixing foundation post with 20 mm GIpipe and tap including all special etc complete
13OD154294/2026-2027:Supply and erection of readymade ferrocement pumphouse of size 1.50x1.50x2.10m as per specification.Rcc post shall be fixed in PCC 1:3:6 of size 45x45x45cm,foundation alround with solid block masonry with CM1:6 of 30x40cm, size ferrocement wall of 1.50mx2.10m of thickness 25mm, ferrocement traingular type roof made of ferrocement slab of thickness 25mm,MS door of size 75x210cm with 1mm thick MS sheet and suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable locking arrangement and a pad lock of 5 lever MS ventilator of size 60x45cm, flooring with CC 1;4;8, 75mm thick and plastered over 12mm thick cement plaster 1;4 and neat cement flushing coat and wall surfaces and roof shall be painted with two coats of exterior emulsion paint over coat of primer.
1418.19.4.2:Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical
152.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
165.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
1710.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1818.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
195.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
20KIZHAKE MICHABHOOMI UNATHI KINAR NIRMANAM
212.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
222.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
235.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)
245.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining
255.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
2610.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2750.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
28OD155242/2026-2027:Supplying and erecting open well submersible pump with motor using best quality, ISI marked motor and pump to suit well , including cost of column pipe (UPVC), UG cable, nylon rope,and all others fitting to including panel board ect and all changes for conveyance of materials , labour,and cost of wiring (KSEB changes for electrical connection paid separately) ect. complete.
2951.18.12.2:Providing and fixing G.I. pipes complete with G.I. fittings (cost of fittings to be paid separately) <br> External work - 20 mm nominal dia
3018.12.6:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore
3118.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
3250.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2
33OD155223/2026-2027:od 1333813/2021-2022: Supplying and fixing foundation post with 20 mm GIpipe and tap including all special etc complete
3418.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58487721
AUTHORITY Government Departments
TENDER VALUE 12.57 Lakhs
LAST DATE 20-11-2026
Authority
Authority Name Local Self Government Department
Work Description Tender for Annual Plan-Pudur Grama Panchayath 2026-27 Pro.No:185 Ward No:14-Anakkal Chudalakkadu,Banglakkadu, Kizhakke Michabhoomi, Gundukkal Kudivella Padhathi-General Civil Work-1-1 CHUDALAKADU KUDIVELLA PADHATHI1.001 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete1.002 5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)1.003 5.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining1.004 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)1.005 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)1.006 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns1.007 OD153694/2026-2027:Supplying and erecting open well submersible pump with motor using best quality, ISI marked motor and pump to suit well , including cost of column pipe (UPVC), UG cable, nylon rope,and all others fitting to including panel board ect and all changes for conveyance of materials , labour,and cost of wiring (KSEB changes for electrical connection paid separately) ect. complete.1.008 51.18.12.7:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) &lt;br&gt; External work - 65 mm nominal dia1.009 OD153394/2026-2027:Providing and fixing HDPE pipes including jointing of pipes with , trenching, refilling &amp; testing of joints complete as per direction of Engineer in Charge. 10kg 63 mm dia HDPE Pipe PE 100 as per IS 4984/1995 modified as 50 .18.9.4.2 1.01 51.18.12.1:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately)&lt;br&gt; External work - 15 mm dia nominal dia,1.011 OD153464/2026-2027:od 1333813/2021-2022: Supplying and fixing foundation post with 20 mm GIpipe and tap including all special etc complete1.012 OD154294/2026-2027:Supply and erection of readymade ferrocement pumphouse of size 1.50x1.50x2.10m as per specification.Rcc post shall be fixed in PCC 1:3:6 of size 45x45x45cm,foundation alround with solid block masonry with CM1:6 of 30x40cm, size ferrocement wall of 1.50mx2.10m of thickness 25mm, ferrocement traingular type roof made of ferrocement slab of thickness 25mm,MS door of size 75x210cm with 1mm thick MS sheet and suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable locking arrangement and a pad lock of 5 lever MS ventilator of size 60x45cm, flooring with CC 1;4;8, 75mm thick and plastered over 12mm thick cement plaster 1;4 and neat cement flushing coat and wall surfaces and roof shall be painted with two coats of exterior emulsion paint over coat of primer.1.013 18.19.4.2:Providing and fixing gun metal non-return valve of approved quality (screwed end): 50 mm nominal boreVertical1.014 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil1.015 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more1.016 10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works1.017 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.1.018 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)2 KIZHAKE MICHABHOOMI UNATHI KINAR NIRMANAM2.001 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil2.002 2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil2.003 5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)2.004 5.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining2.005 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more2.006 10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works2.007 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete2.008 OD155242/2026-2027:Supplying and erecting open well submersible pump with motor using best quality, ISI marked motor and pump to suit well , including cost of column pipe (UPVC), UG cable, nylon rope,and all others fitting to including panel board ect and all changes for conveyance of materials , labour,and cost of wiring (KSEB changes for electrical connection paid separately) ect. complete.2.009 51.18.12.2:Providing and fixing G.I. pipes complete with G.I. fittings (cost of fittings to be paid separately) &lt;br&gt; External work - 20 mm nominal dia2.01 18.12.6:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore2.011 18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore2.012 50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling &amp; testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm22.013 OD155223/2026-2027:od 1333813/2021-2022: Supplying and fixing foundation post with 20 mm GIpipe and tap including all special etc complete2.014 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Basic Detail
Tender No 3/ET/AE/LIDEW/PGP/2026-27
Bidding Type Tender
Location
City Palakkad
State Kerala
Key Dates
Publish Date 12 Nov 2026
Submission Date 20 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 12.57 Lakhs
Tender Fee 2760
EMD 31438
Exemption Available
Document List
Affidaivit.pdf
BOQ_1514069.xls
da5c10f7-8ed4-4ebe-b28c-adbdd6f134cf.html
Fee.pdf
Fot.pdf
Preliminary.pdf
Sbd.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
pdf

Affidaivit.pdf

xls

BOQ_1514069.xls

html

da5c10f7-8ed4-4ebe-b28c-adbdd6f134cf.html

pdf

Fee.pdf

pdf

Fot.pdf

pdf

Preliminary.pdf

pdf

Sbd.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender