Tender For Various Development Works At K5B Scheme Park And Durga Mata Park (Jaswant Nagar) In Ward No. 22, Vidyadhar Nagar Zone.
Tender Value
34.08 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
5 days left
EMD
68160
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Various Development Works At K5B Scheme Park And Durga Mata Park (Jaswant Nagar) In Ward No. 22, Vidyadhar Nagar Zone.
BOQ
| Sl. No. | Item Description |
| 1 | (4.10.1.1) Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m |
| 2 | (4.2.1) Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301.in all type of soil |
| 3 | (4.13) Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. |
| 4 | (1.1.1) Carriage of Materials by mechanical transport including\ loading, unloading and\ stacking ::Earth upto 10 km |
| 5 | (25.1.1) Random rubble masonry with hard stone in foundation and plinth :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | (24.5.2) Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | (32.2) Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:6 (1 cement : 6 fine/ coarse sand) |
| 8 | (32.15) Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 9 | (32.35.1) Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 10 | (9.3) Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manually, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 11 | (30.20.4) Chequered terrazzo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :Ordinary cement without any pigment |
| 12 | (9.11) Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimum compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer in-charge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. |
| 13 | (10.1) Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 14 | (39.48) Supplying, erecting and fixing in position specified precast RCC bench made of RCC grade M-30 consisting of 2 Nos. “L” shaped base support of thickness 100 mm back height 1000mm, front height 450 mm, base width 420mm and 5 Nos. RCC planks of size of 1500x100 x 50 mm and 1 Nos RCC planks of 150x200x50mm including joining all parts with galvanised nuts and bolts of suitable size. All bolts to be sealed after assembly with nice finish and appearance and level complete in all respect as per direction of engineer in-charge. Every bench should have a manufacturer’s logo of appropriate size Engraved at suitable place. |
| 15 | (32.50.1) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 16 | (29.26.2) Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 17 | DoubleSeeSaw: Providing and fixing of double see saw of height 0.5 mtr from ground level.Seat frame and base should be made with 50 mm NB ‘B’ Class G.I. Pipe. Handle pipe should be 25 mm NB ‘B’ class G.I.pipe.Length of see saw lever should be 6 feet. Seats are made with FRP/LLDPE. Max. 4 children can play at one time. |
| 18 | FRP wave slide :Providing and Fixing of FRP wave slide its required area 4.6 mtr x 0.9 mtr platform height should be 5' Ground Level and should be made by 32 mm NB and 25 NB and 20 mm NB pipe MS pipe.Slide length10' all components paint by PU paint in multi colours. |
| 19 | Double Arch Swing: In this two children can enjoy the swing at one time.The arch shaped side frame is made of 65mm NB 'B' Class GI pipe and top pipe is made up of 50mm NB 'B' Class G.I. pipe.The frame is powder coated to give an aesthetic look.The swing is made up of 5mm thick anti skid canvas top. The rubber belt seat is suspended on 6mm rubber coated GI chain. The ball bearings shall be mounted inside a specially designed nylon clamp. |
| 20 | Providing & Fixing of Rotary Thrill Merry Go Round having require area of dia 1.5 meter & height of 1.0 meter from ground level . The center support is made with 60mm ODMS Apollo pipe . The heavy duty ball bearing 6312 of reputed make is attached for smooth rotation. The connecting support to seat shall be made with 32mm ODMS Apollo pipe . The Seat structure is made with 32mm & 25mm ODMS Apollo pipe. The 4 nos. of seats are made from fiber glass reinforce plastic of 3mm thick are attached with the structure . All Equipments should be paint by 2 layer of P.U.paint in multicolor or oven baked powder coated whichever is feasible and possible. |
| 21 | Providing & Fixing of circular swing with steel seat having require area 1.8 mtr. x 1.5 meter and height 2.1 mtr. from ground level. The leg support should be made by 48 mm odms pipe connected with 48 mm ODMS pipe. Top bar connected with outer frame of Circular swing made with 32 mm ODMS pipe & the outer frame is attached with seating structure made with 50 x 15mm ms rectangular pipe & the lower part should be made by 50 x 15mm rectangle pipe for foot rest. All Equipments should be paint by 2 layer of P.U.paint in multicolor or oven baked powder coated whichever is feasible and possible |
| 22 | Providing & Fixing of Climber A-Hexa having require area of 2.4 x 1.2 meter & height of 2.4 meter from ground level . The Vertical support should be made by 48mm ODMS pipe. The Globe outer frame should be made with 40mm ODMS & its inner frame made in 32mm ODMS pipe. Vertical support of spiral climber should be made with 40mm ODMS pipe & its steps made in 25mm ODMS pipe. All Equipments should be paint by 2 layer of P.U.paint in multicolor or oven baked powder coated whichever is feasible and possible. |
| 23 | Providing & Fixing of Toddler Swing having require area of 2.4 x 0.6 meter & height of 2.1 meter from ground level . The arch shape vertical support shall be made with 48mm ODMS Apollo pipe & the center support should be made in 58mm odms Apollo pipe . Between the horizontal bar there is heavy duty metal clamp with inbuilt bearing is attached to swing smoothly . The2 nos. bucket seats of the toddler swing are attached to a rubber coated GI Chain of 6mm . The bucket seats are of LLDPE material . All Equipments should be paint by 2 layer of P.U.paint in multicolor or oven baked powder coated whichever is feasible and possible. |
| 24 | Providing & Fixing of Climber MONKEY BAR having require area of 3.0 x 0.6 meter & height of 2.4 meter from ground level . The Vertical support should be made by 60mm ODMS Apollo pipe & the center support made with 60mm ODMS Apollo Pipe. The loop/ Rings and made in 25mm ODMS & ladder steps made in 32mm Apollo pipe. All Equipments should be paint by 2 layer of P.U.paint in multicolor or oven baked powder coated whichever is feasible and possible. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender