Tender For Providing And Laying Of Ug Cable For Service Connection To Newly Constructed 120 Kld Sewage Treatment Plant (Stp) At Yelahanka Campus Under Stc Bsf Bangalore.
Tender Value
12.12 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
5 days left
EMD
24250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Laying Of Ug Cable For Service Connection To Newly Constructed 120 Kld Sewage Treatment Plant (Stp) At Yelahanka Campus Under Stc Bsf Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 2 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 3 | Earthing with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 4 | Providing and fixing 25 mm X 5 mm G.I. strip in 40mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 5 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 6 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door |
| 7 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 100 A, 16 KA,TPMCCB |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.A) Single pole |
| 9 | B) Triple pole and neutral |
| 10 | Supplying and laying of one number XLPE power cable of 1.1 KV grade of Aluminium conductor 3.5 x 120 Sqmm size in the existing DWC/GI pipe as required. |
| 11 | Supplying and laying of one number PVC insulated and XLPE power cable of 1.1 KV grade of Aluminium conductor 3.5 x 120 Sqmm size in the existing masonry open duct as required. |
| 12 | SITC of water protected outdoor hut type Joint box 600mmx600mmx350mm depth for 415 Volt, 3 phases, 50 Hz made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. The joint box having 200Amp/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with required current carrying capacity bus bars with switchgears, separate detachable gland plate, including angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the panel with legs 600 mm long, hinged door, with locking arrangement for inside/outside separately, earth bar/stud, i/c grouting the legs in 1:3:6 cement concrete foundation complete as required with following instruments mounted on it. (Panel should be as per design & drawing approved by Engg in charge) (Panel should be as per design & drawing approved by Engg in charge) Instruments(Inside/outside) i) LED Pilot light (22.5 MM dia) with 03 Nos with 6 amp MCB on door closure |
| 13 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 3½ X 120 sq. mm (45mm) |
| 14 | Add Cost index 114% on DSR item Rs. 233058/- i.e. Rs. 32,628.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender