Communications and Information Technology Government Departments Closing in 3 days TDR #58483407

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 44 Replacement Of Damaged Lt Cable For Service Connection At Gardadi; Electrical System Or Installation; Service Provider - Supplying And Fixing 3No

Issued by Government Departments · Bengaluru Urban, Karnataka
Tender Value
1.21 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
3 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 44 Replacement Of Damaged Lt Cable For Service Connection At Gardadi; Electrical System Or Installation; Service Provider - Supplying And Fixing 3Nos - 63 Amps 415 Volts Porcelain Fuse Cutouts With Neutral Link In Existing Smc Box And Interconnections Etc As Reqd , S & F Of Pot Head Suitable For 4 Core 16 Sqmm Ug Cable I/C Providing Suitable Clamp On Bescom Pole Etc Complete As Required , Supplying And Fixing 100A Aerial Fuse Cutout- 3Nos & 1No Neutral Link With Dmc/Frp Sheet & With Clamp Suitable For 415 Volts 50Hz Ac Supply Etc Complete As Reqd. (Mescom Approved Make) , Supplying And Fixing Ms Frame Work Made Of 25Mm X 25Mm X 5 Mm Ms Angle For Supporting The Roofing Above Meterboard Including Cutting Welding Drilling Holes Painting Etc. As Reqd , Supplying And Fixing 0.5Mm Thick Nominal Gi Corrugated Roofing Sheet On The Existing Frame Work Including Necessary Nuts Bolts Washers Tar Washers And Cutting To The Required Shape And Dimensions Providing Necessary Holes , Top Angle Sheet Etc. As Reqd , S/F The 40Mm Dia B Class Gi Pipe For Cable Protection In Ground/Mescom Pole. Including Grouting , Cutting, Digging /Clmping On Pole For Cable Protection Including Trench,Refilling Etc… As Reqd. , Supplying And Fixing 63A 4Pole Change Over Switch With Sheet Steel Enclosure Etc As Reqd . Including Testing , Commissioning Etc.. As Reqd(Make : Hpl Socomec ) , Supplying And Laying Of 4X16sqmm Al Conductor Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade With Isi Mark In The Existing Masonry Open Duct As Required. , Supplying And Laying Of 4X16sqmm Al Conductor Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade With Isi Mark In The Existing Pipe As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A) 4 X16 Sqmm , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator).A)4 Way (4 +12), Double Door , Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole , Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. , Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) 63 , Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 300 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) 63 , S&F Of 10W Led Type Bulkhead Fitting Made Of Polycarbonate With 9 Watt Led Bulb Etc Complete As Reqd.(Crompton/Philips/Havells Or Ss Make) , Supplying And Fixing Cable Route Marker With 10 Cm X 10 Cm X 5 Mm Thick G.I. Plate With Inscription There On, Bolted /Welded To 35 Mm X 35 Mm X 6 Mm Angle Iron, 60 Cm Long And Fixing The Same In Ground As Required.

BOQ

Sl. No. Item TitleItem Description
1Supplying and fixing 3Nos - 63 Amps 415 volts porcelain fuse cutouts with neutral link in existing SMC box and interconnections etc as reqdSupplying and fixing 3Nos - 63 Amps 415 volts porcelain fuse cutouts with neutral link in existing SMC box and interconnections etc as reqd
2S & F of Pot head suitable for 4 core 16 Sqmm UG Cable i/c providing suitable clamp on BESCOM Pole etc complete as requiredS & F of Pot head suitable for 4 core 16 Sqmm UG Cable i/c providing suitable clamp on BESCOM Pole etc complete as required
3Supplying and fixing 100A Aerial Fuse Cutout- 3Nos & 1No neutral link with DMC/FRP Sheet & with clamp suitable for 415 volts 50Hz AC supply etc complete as reqd. (MESCOM approved make)Supplying and fixing 100A Aerial Fuse Cutout- 3Nos & 1No neutral link with DMC/FRP Sheet & with clamp suitable for 415 volts 50Hz AC supply etc complete as reqd. (MESCOM approved make)
4Supplying and fixing MS frame work made of 25mm x 25mm x 5 mm MS angle for supporting the roofing above Meterboard including cutting welding drilling holes painting etc. as reqdSupplying and fixing MS frame work made of 25mm x 25mm x 5 mm MS angle for supporting the roofing above Meterboard including cutting welding drilling holes painting etc. as reqd
5Supplying and fixing 0.5mm thick nominal GI corrugated roofing sheet on the existing frame work including necessary nuts bolts washers tar washers and cutting to the required shape and dimensions providing necessary holes , top angle sheet etc. as reqdSupplying and fixing 0.5mm thick nominal GI corrugated roofing sheet on the existing frame work including necessary nuts bolts washers tar washers and cutting to the required shape and dimensions providing necessary holes , top angle sheet etc. as reqd
6S/F the 40mm dia B class GI pipe for Cable protection in ground/Mescom Pole. Including grouting , cutting, digging /clmping on pole for cable Protection including Trench,refilling etc… as reqd.S/F the 40mm dia B class GI pipe for Cable protection in ground/Mescom Pole. Including grouting , cutting, digging /clmping on pole for cable Protection including Trench,refilling etc… as reqd.
7Supplying and Fixing 63A 4pole change over switch with Sheet steel enclosure etc as reqd . Including testing , commissioning etc.. as reqd(Make : HPL SOCOMEC )Supplying and Fixing 63A 4pole change over switch with Sheet steel enclosure etc as reqd . Including testing , commissioning etc.. as reqd(Make : HPL SOCOMEC )
8Supplying and Laying of 4x16sqmm Al conductor PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade with ISI mark in the existing masonry open duct as required.Supplying and Laying of 4x16sqmm Al conductor PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade with ISI mark in the existing masonry open duct as required.
9Supplying and Laying of 4x16sqmm Al conductor PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade with ISI mark in the existing pipe as required.Supplying and Laying of 4x16sqmm Al conductor PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade with ISI mark in the existing pipe as required.
10Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 x16 sqmmSupplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 x16 sqmm
11Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).a)4 way (4 +12), Double doorSupplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).a)4 way (4 +12), Double door
12Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single PoleSupplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole
13Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
14Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 AmpSupplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 Amp
15Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 AmpSupplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 Amp
16S&F of 10W LED type bulkhead fitting made of polycarbonate with 9 watt LED bulb etc complete as reqd.(Crompton/Philips/Havells or SS Make)S&F of 10W LED type bulkhead fitting made of polycarbonate with 9 watt LED bulb etc complete as reqd.(Crompton/Philips/Havells or SS Make)
17Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

AI Tender Summary

OUR REF NO 58483407
AUTHORITY Government Departments
TENDER VALUE 1.21 Lakhs
LAST DATE 18-11-2026
Authority
Authority Name Department Of Telecommunications
Work Description Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 44 Replacement Of Damaged Lt Cable For Service Connection At Gardadi; Electrical System Or Installation; Service Provider - Supplying And Fixing 3Nos - 63 Amps 415 Volts Porcelain Fuse Cutouts With Neutral Link In Existing Smc Box And Interconnections Etc As Reqd , S & F Of Pot Head Suitable For 4 Core 16 Sqmm Ug Cable I/C Providing Suitable Clamp On Bescom Pole Etc Complete As Required , Supplying And Fixing 100A Aerial Fuse Cutout- 3Nos & 1No Neutral Link With Dmc/Frp Sheet & With Clamp Suitable For 415 Volts 50Hz Ac Supply Etc Complete As Reqd. (Mescom Approved Make) , Supplying And Fixing Ms Frame Work Made Of 25Mm X 25Mm X 5 Mm Ms Angle For Supporting The Roofing Above Meterboard Including Cutting Welding Drilling Holes Painting Etc. As Reqd , Supplying And Fixing 0.5Mm Thick Nominal Gi Corrugated Roofing Sheet On The Existing Frame Work Including Necessary Nuts Bolts Washers Tar Washers And Cutting To The Required Shape And Dimensions Providing Necessary Holes , Top Angle Sheet Etc. As Reqd , S/F The 40Mm Dia B Class Gi Pipe For Cable Protection In Ground/Mescom Pole. Including Grouting , Cutting, Digging /Clmping On Pole For Cable Protection Including Trench,Refilling Etc… As Reqd. , Supplying And Fixing 63A 4Pole Change Over Switch With Sheet Steel Enclosure Etc As Reqd . Including Testing , Commissioning Etc.. As Reqd(Make : Hpl Socomec ) , Supplying And Laying Of 4X16sqmm Al Conductor Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade With Isi Mark In The Existing Masonry Open Duct As Required. , Supplying And Laying Of 4X16sqmm Al Conductor Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade With Isi Mark In The Existing Pipe As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A) 4 X16 Sqmm , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator).A)4 Way (4 +12), Double Door , Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole , Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. , Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) 63 , Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 300 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) 63 , S&F Of 10W Led Type Bulkhead Fitting Made Of Polycarbonate With 9 Watt Led Bulb Etc Complete As Reqd.(Crompton/Philips/Havells Or Ss Make) , Supplying And Fixing Cable Route Marker With 10 Cm X 10 Cm X 5 Mm Thick G.I. Plate With Inscription There On, Bolted /Welded To 35 Mm X 35 Mm X 6 Mm Angle Iron, 60 Cm Long And Fixing The Same In Ground As Required.
Basic Detail
Tender No GEM/2026/B/8264096
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 11 Nov 2026
Submission Date 18 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value 1.21 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
ae7d6186-78fc-4292-8d28-0320685be248.pdf
1794393032.xlsx
1794393074.pdf
1794393080.pdf
1794393091.pdf
1794393095.pdf
ATC44_fdb222e2-709e-4cc9-bbe61794393281968_EEEMGL.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
pdf

ae7d6186-78fc-4292-8d28-0320685be248.pdf

xlsx

1794393032.xlsx

pdf

1794393074.pdf

pdf

1794393080.pdf

pdf

1794393091.pdf

pdf

1794393095.pdf

pdf

ATC44_fdb222e2-709e-4cc9-bbe61794393281968_EEEMGL.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender