Tender For Repair And Maintenance Of Public Health Services Of Govt. Residential Houses (Type-Ix, Vi & V ) Under maintenance Booth Sector-19, U.T Chandigarh(Ch To: 2216 (N.P.) maintenance And Repair )
Tender Value
7.04 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
1 days left
EMD
14084
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Public Health Services Of Govt. Residential Houses (Type-Ix, Vi & V ) Under maintenance Booth Sector-19, U.T Chandigarh(Ch To: 2216 (N.P.) maintenance And Repair )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 2 | Kitchen sink without drain board DSR 17.10.2 |
| 3 | 610x460 mm bowl depth 200 mm.DSR 17.10.2.2 |
| 4 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.DSR 17.15 |
| 5 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto1 Mtr long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16.A |
| 6 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete DSR 17.20 |
| 7 | White solid plastic seat with lid DSR 17.20.1 |
| 8 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.DSR 17.28 |
| 9 | 32 mm dia DSR 17.28.1.1 |
| 10 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR 17.81 |
| 11 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall DSR 18.10 |
| 12 | 15 mm dia nominal bore DSR 18.10.1 |
| 13 | 20 mm dia nominal bore DSR 18.10.2 |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 15 | 20 mm nominal bore DSR 18.17.1A |
| 16 | 15 mm nominal bore NSR |
| 17 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 18 | 15 mm nominal bore DSR 18.21.2.1 |
| 19 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 20 | 15 mm nominal bore DSR 18.46.1 |
| 21 | 20 mm nominal bore DSR 18.46.2 |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 23 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 24 | 15 mm nominal bore. DSR 18.49.1 |
| 25 | Providing and fixing C.P. brass long body bib cock 15 mm dia DSR 18.51.1 |
| 26 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points . DSR 18.53 |
| 27 | 15 mm nominal bore. DSR 18.53.1 |
| 28 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge DSR 18.53A |
| 29 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 30 | 15 mm nominal bore, DSR 18.62.1 |
| 31 | 20 mm nominal bore, DSR 18.62.2 |
| 32 | Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make |
| 33 | Providing and fixing of Wall hung wash basin with full pedestal complete with C.I./MS brackets 32mm C.P. brass waste as per standard pattern including cutting and painting of brackets and making good the walls Make Cera Model CONCORD (Basin - 1022 & Pedestal 1121 ) or equivalent in the same price range or AOR |
| 34 | Providing and fixing of Bib cock with wall flange, make Jaquar range Continental Model CON-047KN or equivalent in the same price range or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 35 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range Continental Model CON-059KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC . |
| 36 | Providing and fixing of Long Body bib cock with wall flange, make Jaquar range Continental Model CON-107KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 37 | Providing and fixing of Central Hole Mixer with 450 mm long braided hoses, make Jaquar range Continental Model CON-167KNB or equivalent in the same price range or AOR |
| 38 | Providing and fixing of Sink Mixer with Swiniging Casted Spout ( Wall Mounted Model ) with connecting legs and Wall Flanges complete make Jaquar range Continental Model CON-309KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 39 | Providing and fixing of Wall Mixer 3 in 1 System with provision for both Hand Shower and Overhead Shower complete with 115 mm long bend pipe,Connecting Legs and Wall Flange make Jaquar range Continental Model CON-281KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 40 | Providing & fixing of Overhead Shower 180 mm Make Jaquar Model 1759 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 41 | Providing and fixing Shower Arm 450 mm long make Jaquar Model SHA-479L450 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 42 | Providing & fixing Hand Shower 100 mm Round Shape Single/Multi Flow Make Jaquar Model HSH-1937or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 43 | Providing and fixing Flexible tube for Hand Shower Make Jaquar Model SHA-549 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 44 | Providing and fixing of Wall Bracket for Hand Shower make Jaquar or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 45 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 46 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 47 | Providing and fixing of Glass Corner ( with bracket ) make Jaquar range Continental Model ACN-1171N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 48 | Providing and fixing of Glass Shelf make Jaquar range Continental Model ACN-1173N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 49 | Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 50 | Providing and fixing C.P. Toilet Roll Holder complete in all respect make Jaquar range Continental Model CAN-1151N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 51 | Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 1-Meter-Long Easy Flex Tube in Chrome Finish & W all Hook Complete Make Jaquar Model ALD-587 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 52 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 53 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 54 | Providing and fixing of C.P. Steel Grating Heavy (With hole or without hole) 100 mm dia, of approved make. |
| 55 | Providing and fixing of C.P. waste complete in all respect |
| 56 | 32mm dia for WHB |
| 57 | 40mm for S.S. Sink |
| 58 | Providing and fixing of PVC tank cover |
| 59 | 500/300 ltr cap. |
| 60 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 61 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 62 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 63 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 64 | Providing and fixing of one piece EWC Seat cover make Hindware , Model ELEMENT Complete in all respect or equivalent model of approved make to the satisfaction of EIC |
| 65 | Providing and fixing GI Tank Nipple 20 mm dia complete in all respect of approved make |
| 66 | Providing & Fixing CP Nozzel Tap any approved make complete in all respect |
| 67 | Providing and fixing of CP/SS Long Bend /short bend for OWC |
| 68 | Providing and fixing of C.P. pillar cock of approved make |
| 69 | Providing and fixing of fitting for low level flushing cistern of approved make. |
| 70 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 71 | 100 mm (110mm) |
| 72 | 75 mm (90mm) |
| 73 | Providing and fixixng of CP Brass Spindle (Heavy Duty) for bib taps and Pillar taps weight approx. 110 grms. |
| 74 | Replacement of 1 H.P. monoblock boosting pump including cost of fixing & fitting accessories, Head range 6 to 39 mtr, discharge 2880-750 LPH, CG Mjnisapphire or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 75 | Replacement of Hydro pneumatic pump of size 0.5 HP of approved make with pressure switch pressure gauge, accessories and making connection complete having discharge 2000 LPH at 6m head make Crompton or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender