Tender For Development Works At The Dhwaj Jayanti Mata Temple For The Convenience Of Devotees (Including The Construction Of Accommodation, Drinking Water Facilities, Toilets, Pathways, Etc.).
Tender Value
74.12 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
11 days left
EMD
1.74 Lakhs
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Works At The Dhwaj Jayanti Mata Temple For The Convenience Of Devotees (Including The Construction Of Accommodation, Drinking Water Facilities, Toilets, Pathways, Etc.).
BOQ
| Sl. No. | Item Description |
| 1 | 2.8.1 Earth work in excavation by mechanical means (HydraulicExcavator )/ manual meansin foundation trenches or drains (not exceeding 1.5 m in widthincluding dressing of sides out the excavated soil and disposal of surplus excavated soil1.5 m, including gettingand ramming of bottoms, lift upto |
| 2 | 4.1.8 Providing and laying in position cement concrete of specifiedgrade excluding theAll work upto plinth level1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm |
| 3 | 5.3 Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above |
| 4 | Reinforcement for R.C.C. work including straightening,cutting, bending, placingin position and binding all complete. 5.22.1 |
| 5 | Shelves (Cast in situ) 5.9.4 |
| 6 | Providing and fixing aluminium handles, ISI marked 9.100.1 |
| 7 | Providing and fixing aluminium tower bolts, ISI marked, anodised 9.97.2 |
| 8 | Providing and fixing aluminium sliding door bolts, ISI marked anodised 9.96.2 |
| 9 | Providing and fixing aluminium hanging floor door stopper |
| 10 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinthlevel upto floor V level in all shapes and sizes inCement mortar 1:6 5.9.6 |
| 11 | Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sandgraded stone aggregate 20 mm nominal size) upto plinth level with 1.7 |
| 12 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4slurry, but excludingthe cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate 9.97.2 |
| 13 | 12 mm cement plaster of mix1:6 (1 cement : 6 fine sand) 9.96.2 |
| 14 | Steel work welded in built up section/framed work includingin position and applying a priming coat of approved steelprimer using steel etc. In gratings, frames, guard bar, gates and similar worksladder, railings, brackets, 10.25.2 |
| 15 | Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold 11.3.1 |
| 16 | Providing and fixing ISI marked flush door shuttersnon-decorative type, core of block board construction withframe of 1st class hardwood and well matched commercial 3 ply veneering with35 mm thick including 9.21.1 |
| 17 | Providing and laying in position cement concrete of specified grade excluding thecost of centring and shuttering - All work upto plinth level1:2:4 .4.1.3 |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved . 11.36 |
| 19 | Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturerwith water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, .11.46.1 Size11.46 |
| 20 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shadeNew work with cement primer 11.3.1 |
| 21 | Finishing walls with textured exterior paint of required shadeNew work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement |
| 22 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard 17.6.2 |
| 23 | Providing and fixing white vitreous china water closet squatting panOrissa pattern W.C. pan of size 580x440 mm 17.13.2 |
| 24 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all10 litre capacity - White 17.18.1 |
| 25 | 18.10.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc Internal work |
| 26 | 18.12.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc External work |
| 27 | 17.7.1 White Vitreous China Wash basin size 630x450 mm witha pair of 15 mm C.P. brass pillar taps |
| 28 | 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete |
| 29 | 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion |
| 30 | 4.6.1 Providing and fixing at or near ground level precast cement concrete inkerbs, edgings etc. as per approved pattern and setting in positionwith cement mortar 1:3 (1 Cement : 3 coarse sand), including the costof required centering, shuttering complete.4.6.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stoneaggregate 20 mm nominal size). |
| 31 | 18.48. A Providing and fixing rectangular high density polyethylene waterstorage loft tank with cover, conforming to ISI : 12701, colour ofopaque white or as approved by Engineer-in-charge. The rate includesmaking necessary holes for inlet, outlet & over flow pipes. The basesupport i/c fittings & fixtures for tank shall be paid separately. per litre 8.80 |
| 32 | 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved qualityconforming to IS standards and weighing not less than 810 gms.18.50.1 15 mm nominal bore |
| 33 | 17.31 Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
| 34 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36mm height of approved quality and colour, weighing not less than300 gms. 17.74 |
| 35 | Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.18.65 |
| 36 | 1.3 S.O.R Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls,etc. including supply of all material, labour, T&P and royaltiies etc.complete as per drawing and technical specifications Clauses 702, 7041202 & 1203 of MORD Specifiction |
| 37 | 11.20.1 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 38 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, inbreast walls, retaining walls, parapets, scuppers, etc. including supply ofall material, labour, T&P and royaltiies etc.1.4 SOR |
| 39 | 12.1.1 Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers filled with white lead, including a coat of approved steelwashers or with G.I. limpeprimer and two coats of approved paint on overlapping of sheetscomplete . 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 40 | 12.4.1 Providing ridges or hips of width 60 cm overall width plain G.S. sheetfixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete0.80 mm thick with zinc coating not less than 275 gm/m |
| 41 | 5.1.2 Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centring, shuttering,finishing and reinforcement - All work1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone |
| 42 | 5.2.2 Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and stringcourses, fillets, columns, pillars, piers,abutments, posts andstruts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement1:1.5:3 . |
| 43 | Lintels, beams, plinth beams, girders, bressumers and cantilevers 5.9.5 |
| 44 | 12.5 Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer |
| 45 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. 7.8.1 Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) 7.8.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender