Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58482780

Tender For Repair And Maintenance Of Steel Furniture And Misc Items At New Cantt Prayagraj And Chheoki Mil Station Under Ge (West) Prayagraj.

Issued by Statutory Bodies & Commissions/Committees · Prayagraj, Uttar Pradesh
Tender Value
1.35 Crore
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
2.10 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair And Maintenance Of Steel Furniture And Misc Items At New Cantt Prayagraj And Chheoki Mil Station Under Ge (West) Prayagraj.

BOQ

Name of Work:- REPAIR AND MAINTENANCE OF STEEL FURNITURE AND MISC ITEMS AT NEW CANTT PRAYAGRAJ AND CHHEOKI MIL STATION UNDER GE (WEST) PRAYAGRAJ.
Sl. No. Item Description
1(A) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule and Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact as applicable with standard workmanship and as directed by GE/Engr-in-Charge.(B) Work will be executed where the furniture exist in different User Units/Md accns of GE (West) Prayagraj including BSO's Furniture Yard as directed by Engineer-in-Charge.
2Almirah Large Steel, FD-67 / 1031/ TP/MAP or any type
3Steel 6 lever locks (Godrej/Link/Ebco/Hepo) as per drg
4Inside 6 Steel lever locks (Godrej/Link/Ebco/Hepo) for 1/2H 1/2S Almirah as per drg
5Marooti lock as per sample and directed by GE/EIC
6CP Handle as per drg
7CP Handle for 1/2H 1/2S Almirah as per drg
8Legs as per drg
9Repairs to door as specified including replacement of hinges
10Repair/adjustment to existing shelf including welding as per drg
11Shutter as per drg.
12Shelf as per drg
13Locking arrangement complete including MS bar.
14Welding wherever required as directed by GE/EIC
15Almirah Medium / Small Steel, FD-1032/FD-104(m) or any type
16Steel 6 lever locks (Godrej/Link/Ebco/Hepo) as per drg
17CP Handle as per drg
18Legs as per drg
19Repairs to door as specified including replacement of hinges
20Repair/adjustment to existing shelf including welding as per drg
21Shutter as per drg.
22Shelf as per drg
23Locking arrangement complete including MS bar.
24Welding wherever required as directed by EIC
25Locker Steel, FD-1029/257/SKD-562 or any type
26CP handels as per drg
27S/S Hasp & Staple , rest as per drg
28Repairs to door including replacement of hinges
29Shutter/door as per drg.
30Legs as per drg
31CP Conduit pipe as per drg
32Shelf as per drg.
33Steel 6 lever locks (Godrej/Link/Ebco/Hepo) as per drg.
34Locking arrangement complete including MS bar.
35Welding wherever required as directed by EIC
36Charpoy GI pipe ply top, FD-220
37Plywood top 12 mm thick of size as per drg ,BWP Grade (Make: Century Ply/Greenply/Archidply ) as per existing shape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete and 12mm x 6mm thick 2nd class hard wood beading half round along with the edges duly smoothened of the plywood and rounded at corner fixed with fevicol and headless nails all as directed by Engr-in-Charge.
38Supply and fixing of MS Flat iron of size 40x5mm x 900 mm duly pinted with two coat of black colour synthetic enamel paint over a coat of red oxide primer to be welded, over the long rails equal to existing width of Charpoy including drilling holes suitably as directed by Engr-in-Charge.
39Supply and fixing of Long rail of 32 mm dia Medium grade GI pipe including cutting, threading and suitable hole for fixing of plywood complete all as Specified and directed by Engr-in-Charge.Make of Pipe: Tata/Jindal/ Prakash.
40Replacement of unserviceable short rail from charpoy GI pipe 32 mm dia but \\"except pipe\\" including cutting, threading and suitable holes as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 2.03 here in before.
41Replacement of unservicable legs from charpoy GI pipe 32 mm dia but except pipe including cutting, threading etc as required and MS plate of 3mm thick and 36mm dia shall be welded to bottom of leg flat iron and clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed by Engr-in Chg. Note : Pipe obtained from ser item No 2.04 above shall be used for this items.
42Supply and fixing of GI Elbow 3 way 32 mm dia medium grade ISI Marked complete all as specified and directed by Engr-in Chg.
43Supply and fixing of Check nuts 32 mm dia complete all as specified and directed by Engr-in Chg.
44supply and fixing of MS plate of 3 mm thick and 36 mm dia welded to legs of GI Charpoy pipe complete all as specified and directed by Engr-in Chg.
45Welding work wherever required as directed by EIC
46Painting frame of the Charpoy GI with two coat of synthetic enamel 1st quality over a coat of red oxide primer of approved quality after preparation of steel surface by griding welding spot, sanding with sand emery paper and dusting the surface with clean cloth and applying metal putty on required as directed by GE/EIC.
47BED Hard Steel, FD-E6/MAP/08®
48Head rest shall be 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century Ply) with 1 mm thick PVC edging shall be fixed alround complete,rest all as per drg.
49Foot rest shall be 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 1 mm thick PVC edging shall be fixed alround complete,rest all as per drg..
50Replacement of unserviceable Top with Ply top 12 mm thick BWP Grade grade (Make: Greenply/Archidply/Century ply) all as per drg.
51Long Rail as per drg.
52Head Rest MS Frame complete as per drg.
53Foot Rest MS Frame complete as per drg.
54Stiffener as per drg.
55Welding spot work wherever required as directed by EIC.
56Painting frame of the Bed Hard Steel with two coat of synthetic enamel 1st quality over a coat of red oxide primer of approved quality after preparation of steel surface by griding welding spot, sanding with sand emery paper and dusting the surface with clean cloth and applying metal putty on required as directed by GE/EIC.
57Charpoy IP folding, FD-388 (R)
58Replacement of unserviceable Top with Plywood 8 mm thick BWP grade plywood fixed with 50mm long 6mm dia flat head nut , bolts and washers. complete all as specified on drg and as directed. (Make: Greenply/Archidply/Century ply)
59Replacement of Unserviceable PVC shoes with best quality inner shoe height 30mm shall be provided to legs of charpoy complete all as specified and as directed by EIC/GE.
60Painting of frame of the Charpoy Folding with two coat of Synthetic enamel 1st quality paint of approved shade over a coat of red oxide of approved quality after preparation of steel surface by grinding welding spot, sanding with sand emery paper and dusitng the surface with clean cloth and applying metal putty on required as directed by GE/EIC.
61Welding spot work wherever required as directed by EIC.
62Charpoy with Hard Top, FD/MAP-II/01
63Replacement of unserviceable Top with Plywood 12 mm thick BWP grade plywood fixed with 50mm long 6mm dia flat head nut , bolts and washers. complete all as specified on drg and as directed(Make: Greenply/Archidply/Century ply)
64Removing broken unserviceable stiffeners of MS Square tube 25mmx25mm and fixing MS Square tube 25mmx25mm of 18 Guage to charpoy through welding complete all as shown on drg and as directed
65Long Rail as per drg.
66Short Rail as per drg.
67Head Rest MS Frame complete as per drg.
68Foot Rest MS Frame complete as per drg.
69Stiffener as per drg.
70Welding spot work wherever required as directed by EIC.
71Painting of frame of the Charpoy with Hard Top with two coat of synthetic enamel 1st quality of approved shade over a coat of red oxide of approved quality after preparation of steel surface by grinding welding spot, sanding with sand emery paper
72Table Bed Side FD/(MAP), FD-276/248 FD/E6/MAP/15(R)
73Back of 6 mm thick ply BWP grade plywood (Make: Greenply/ Archidply/ Century ply) shall be used as per shape and size shown in drg.
74Top made out of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg.
75Sides made out of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg.
76Drawer Large made of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg. sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hepo/Ebco/IPSA/Kich) and CP Handle 4\\" (Make: Hettich/Ebco/Quba) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.
77Drawer Small made of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg. sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hepo/Ebco/IPSA/Kich) and CP Handle 4\\" (Make: Hettich/Ebco/Quba) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.
78Welding work wherever required as directed by EIC.
79PVC shoe as per sample.
80Teapoy Verandah, FD-383/255/MAP or any type
81Rubber shoe std quality as per drg
82Top made out of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/E3/Square1 with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg.
83Flat iron/conduit section any member as per drg.
84Table 3'x2' with and w/o drawer & Table 3'x3', FD-1008/1007/1009 or any type
85Welding wherever required as directed by EIC
86Top 18 mm thick of size 3'x2' made out of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/E3/Square1 with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg.
87Top 18 mm thick of size 3'x3' made out of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/E3/Square1 with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg.
88Repairs to Drawer by replacing old u/s parts with new parts and providing roller bearing including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.
89Rubber shoe std quality as per drg
90Lock of drawer as per drg (Make : Godrej/Link/EBCO)
91MS section any member as per drawing.
92Computer Table, FD/E6/MAP/12 or any type
93Computer TableTop made out of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg.
94Key board tray shall be of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg., SS Nut & Bolts shall be used for fixing the top as directed by GE/EIC.
95Sides shall be 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg. with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shall be used for fixing the top as directed by GE/EIC.
96Drawer made of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg., sides/back shall be of 18 mm thick Prelaminated HDF board and bottom of drawer shall be 9 mm thick BWP Plywood complete. all as directed by GE/EIC.
97Mouse holdershall be made of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging shall be fixed alround complete,rest all as per drg.
98Telescopic channel (Make -Ebco/Hettich/Ozone/ Quba) and CP Handle 5'' as per sample held in BSO yard be provided in Drawers, mouse holder and Key board tray all as directed by GE/EIC.
99All metal work shall be PU paint after applying metalic putty and preparation of surface smooth.
100Adjustable PVC Shoes best quality
101Welding wherever required as directed by EIC
102Shoe Rack steel, FD-1030 or any type
103Replacement of worn out US pipe from the level of bottom gap & fixing of new pipe through welding to the height of 6'' from ground level gas welding irrespective of drg and as directed by GE/EIC
104MS bar mesh 5mm iirespective of whatever shown on drg complete as specified and as directed.
105PVC Inner Shoe best quality as specified and as directed
106Welding work as per directed by EIC/GE
107Rack Six Tiers steel / Book self open large and any type of rack, FD-1038
108S&F Back of Racks as per drg
109S&F side of Rack as per Drg
110S&F of Shelves as per Drg
111Welding wherever required as directed by EIC
112Book Case Steel or any type
113Steel 6 lever locks (Godrej/Link/Ebco/Hepo) as per drg
114CP Handle as per drg
115Glass of shutter including fixing as per drg
116Repair/adjustment to existing shelf as per drg
117Shutter as per drg.
118Shelf as per drg
119Welding wherever required as directed by EIC
120Table Office Clerk Steel, FD-84 / 381 FD-1004 or any type
121Legs, as per drg
122Lock of drawer as per drg (Godrej/Link/Ebco/Hepo)
123Repairs to Draweras specified & as directed by Engr-in-Chg.
124MS conduite any as per drg
125PVC Shoes std quality all as per drg
126Welding the joints of legs / square tube as per drg
127Top 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/E3/Square1 with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg.
128Table Office Officer Steel, FD-84/1003 or any type
129Legs, as per drg
130Lock of drawer as per drg (Godrej/Link/Ebco/Hepo)
131Repairs to Draweras specified & as directed by Engr-in-Chg.
132MS Steel members any as per drg
133PVC Shoes std quality all as per drg
134Welding the joints of legs / square tube as per drg
135Top 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/E3/Square1 with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg.
136Chair School with hard board, FD/E6/MAP/05 or any type
137One piece seat and back (Make: Blowplast/Supreme) as per drg.
138Hand board of chair made of 18 mm thick Prelaminated HDF board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/E3/Square1 with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg.
139Base frame for fixing hand board.
140Welding work wherever required as directed by EIC.
141Chair Steel Padded, FD-75(M) or any type
142M&L For Removal Of Unsv seat & Back of Chair, S&F of Seat And Back of Chair With New Seat made of moulded ply covered with 75mm PU foam and best quality tapestry cloth inrespective of what is shown on drg. The back shall be 12 mm thick moulded ply fixed to frame with screwand covered with 50 mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with weldiing to steel frame etc complete all as specified and directed. Note - The Tapestary cloth shall be of ranging between Rs 350 per Meter and as per sample approved by GE.
143M&L for removal of UNSV arm rest of chair and S&F of new arm rest of black integral Skinpolyurethanere inforced with MS insert and shall be scrathch and weather resistant complete all as specified and directed.
144S&F in replacement hard rubber shoes at the bottom of chair CB steel shown on drg complete all as specified and directed.
145Welding of broken parts of Chair Steel with 25 mm round MS conduite pipe of 1.6 gauge as per existing shapes & size
146CHAIR CB STEEL WITH/WITHOUT ARMS or any type
147S&F 02 Nos MS Flat iron 40mmX3mm thick of required lenghth for fixing seat and 04 Nos MS cleat of size 25mmX40mmX3mm for fixing back through MIG welding all as directed by GE/EIC
148S&F of Seat and Back of Chair With New Seat made of moulded ply covered with 75mm PU foam and best quality tapestry cloth inrespective of what is shown on drg. The back shall be 12 mm thick moulded ply fixed to frame with screwand covered with 50 mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with weldiing to steel frame etc complete all as specified and directed. (Note - The Tapestary cloth shall be of ranging between Rs 450 per Meter and as per sample approved by GE).
149M&L for removal of UNSV arm rest of chair and S&F of new arm rest of black integral Skin polyurethanere inforced with MS insert and shall be scrathch and weather resistant complete all as specified and directed.
150S&F in replacement hard rubber shoes at the bottom of chair CB steel shown on drg complete all as specified and directed.
151Welding of broken parts of Chair Steel with 25 mm round MS conduite pipe of 1.6 gauge as per existing shapes & size.
152Chair Verandah, FD/MAP-II/06
153Conduit section any member of MS conduit pipe 16G, 19/20mm dia as per drg.
154Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC
155Removal of old paint by scrapping and prepration of surface smooth by a coat of red oxide peimer applying putty and two coats of synthetic enamel paint 1st quality of approved shade over a coat of red oxide primer all as per specification.
156S&F stiffner of size 12 mm square pipe 18Gx16\\" with appropriate MS plate duly painted shall be provided below the seat of chairs complete as directed by EIC
157S&F PVC Seat & back as per drg
158Chair Computer/ Revolving, FD/E6/MAP/01,TP or any type
159Seat shall be made of moulded polyurethane foam with 40 density (Make:Sleepwell (Primo cool)/Godrej/ Komfort Universe (Polycool) pasted with adhesive on 12mm thick moulded plywood covered with tapestry cloth sample held in BSO Yard (Colour and shade to be approved by GE) of cost not less than Rs. 350/- per RM.
160Back Seat - all as above but back complete.
161PU arms all as directed by EIC.
162Complete pedestrail assy std quality (As per Sample) complete all as directed by EIC.
163Supply and fixing new twin wheel castors of required dia complete all as directed by EIC.
164Supply & fix new chrome free cylinder tube shall be fixed complete all as directed by EIC.
165Locking lever assembely and Supply & fix new all as directed by EIC.
166Removal of old paint by scrapping and prepration of surface smooth by a coat of red oxide peimer applying putty and two coats of synthetic enamel paint 1st quality of approved shade over a coat of red oxide primer all as per specification.
167M&L for painting two coat of synthetic enamel 1st quality paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge.
168Almirah Steel Medium/Small
169Almirah Steel Large
170Locker Steel
171Table 3x2 with and w/o drawer & 3'x3'
172Rack steel any type
173Rack Shoe steel
174Trestle store room
175Computer Table
176Chair School with Hand board
177Chair Steel Padded, FD-75(M)
178Chair CB steel with/with out arm
179Table Bed Side FD/(MAP), FD-276/248 FD/E6/MAP/15(R) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58482780
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.35 Crore
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair And Maintenance Of Steel Furniture And Misc Items At New Cantt Prayagraj And Chheoki Mil Station Under Ge (West) Prayagraj.
Basic Detail
Tender No 83073/W/E8
Bidding Type Tender
Location
City Prayagraj
State Uttar Pradesh
Key Dates
Publish Date 11 Nov 2026
Submission Date 09 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 1.35 Crore
Tender Fee 1000
EMD 2.10 Lakhs
Exemption Available
Document List
ad655b0c-6504-47a4-b5ee-649e9b61e7d9.html
BOQ_895457.xls
Indexpageandfwdingpage.pdf
Particularspecification.pdf
Specialcondition.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 24 days

Tender Documents

Download All (ZIP) ↓
html

ad655b0c-6504-47a4-b5ee-649e9b61e7d9.html

xls

BOQ_895457.xls

pdf

Indexpageandfwdingpage.pdf

pdf

Particularspecification.pdf

pdf

Specialcondition.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender