Tender For Repair/Resurfacing Of Road And Associated Works At Af Stn Borgad Under Ge (Af) Ojhar
Tender Value
45 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Resurfacing Of Road And Associated Works At Af Stn Borgad Under Ge (Af) Ojhar
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for repair to pot holes not exc 1 sq m each including sweeping in free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and by applying tack coat with bitumen primer @ 5 kg per 10 sq m putting in premixed bituminous macadum well rammed and sealed with binder 9.8 kg per 10 sqm, binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes n exc 30 mm complete all as specified and directed. |
| 2 | Material and labour for preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying tack coat with bituminous primer @ 10kg/10Sqm of paving bitumen of grade VG-10 over bituminous macadam surfaces all as specified.complete all as specified and directed. |
| 3 | Material and labour for repairs to unleveled surfaces, depression, road side cuts etc., by filling premixed bituminous macadam using VG-30 paving bitumen @ 4% by weight to total mix laid by material power, rolled and compacted to required gradient and camber with 8 to 10 tone vibratory power roller (consolidated thickness of 75 mm or less) and laid by (using computerized hot mix plant and mechanical paver) complete all as specified and directedNote:-(i) The rates to be worked out by the contractor for quoting their rate for this item is on the basis of binder content of 4% of the total mix by weight. At the time of actual design mix for the bitumen content more than the specified percentage contractor shall not be reimbursed any extra cost and bitumen content less than the specified percentage then rate shall be adjusted on minus side based on prevailing rate of bitumen. |
| 4 | Applying evenly a tack coat with hot paving bitumen of grade VG-10 @ 5 kg/10 sqm over successive bituminious layers using mechanical sprayer all as specified and directed. Note :- Each layer shall be measured and paid seperately |
| 5 | Material and labour for providing 2.0 mm thick thermoplastic road marking of compound of white / yellow of approved shade for road marking of width not exc. 100 mm and painting lines, dashes,arrows etc on bitumen road / pavement and on concrete/ bituminous surfaces using indigenous modern propelled road marking machine including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate inter filler etc removing old paint by paint remover and cleaning with scrapers for removing all dirt/dust and other foreign matters at site and managing traffic control etc complete all as specified and as directed |
| 6 | Material and labour for bituminous premix semi dense asphaltic Concrete 40 mm thick (consolidated thickness), using graded crushed stone aggregate premixed with binder (paving grade bitumen VG-30 grade) @ 5.5% binder content by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient complete all as specified and directed.Note:- The rates to be worked out by the contractor for quoting their rate for this item is on the basis of binder content of 5.5% of the total mix by weight. At the time of actual design mix for the bitumen content more than the specified percentage contractor shall not be reimbursed any extra cost and bitumen content less than the specified percentage then rate shall be adjusted on minus side based on prevailing rate of bitumen. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender