Tender For Up-Gradation Of Despatch Section In The High Court, Old Block To Make It Fit To Be Used As Digitization Section Of This Registry (Interior Painting Works, Aluminium Partition Works, Providing Of Cupboards Etc.)
Tender Value
21.14 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
20 days left
EMD
42294
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Up-Gradation Of Despatch Section In The High Court, Old Block To Make It Fit To Be Used As Digitization Section Of This Registry (Interior Painting Works, Aluminium Partition Works, Providing Of Cupboards Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 3 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 6 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 8 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 9 | Providing erecting cutting and fixing 550 mm depth free standing bookstorage cupboard with laminated finished erected/making to be made with 19 mm thick green plywood on all frame structure and requiredpartition with self member as per rquired height with providing fixing of edge binding in all plywood edges cutting and pasting with fixing for 1.5 mm thick decorative laminated sheet on both side ply surface including all hardware fitings like nails, fevicol, pesting tap, handle, lock, hinges etc as a complete with all necessary required materials and labour as directed by the concerned departmen |
| 10 | Providing erecting cutting fitting and fixing of laminated finished executive table (size 1500mm x 650mm x 750mm) to be made with 19 mm thick green marine plywood for frame structure with table top to be 40 mm thick and pasting of 1.5 mm. thick decorative laminated shoot on over ply fram structure in both surfaces of the ply Including providing and fixing of drawer chainel, moudular L-hing, cupboard lock, magnate cather, tower bolt, with pesting tape, fevicol adhesive, nails, screws etc,, the work is complate with all necessary hardware materials and labour as per directed by the concern department, Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender