Housing Urban and Rular Development Local Bodies Closing in 8 days TDR #58481063

Tender For Construction Of Public Distribution Shop Building At Pazhayaseevaram Village In Pazhayaseevaram Panchayat In Walajabad Panchayat Union. Under Mlacds 2026-27 . Est Amt : 1388000/-

Issued by Local Bodies · Kanchipuram, Tamil Nadu
Tender Value
13.88 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
13880
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Public Distribution Shop Building At Pazhayaseevaram Village In Pazhayaseevaram Panchayat In Walajabad Panchayat Union. Under Mlacds 2026-27 . Est Amt : 1388000/-

BOQ

Name of Work:- CONSTRUCTION OF PUBLIC DISTRIBUTION SHOP BUILDING AT PAZHAYASEEVARAM VILLAGE IN PAZHAYASEEVARAM PANCHAYAT IN WALAJABAD PANCHAYAT UNION. Under MLACDS 2026-27 . Est Amt : 1388000/-
Sl. No. Item Description
1Name of Work CONSTRUCTION OF PUBLIC DISTRIBUTION SHOP BUILDING AT PAZHAYASEEVARAM VILLAGE IN PAZHAYASEEVARAM PANCHAYAT IN WALAJABAD PANCHAYAT UNION. Under MLACDS 2026-27 . Est Amt : 1388000/-
2Earth work excavation in hard gravelly soil with initial lead and lift in narrow Trench as per SS20 B for Foundation.
3Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard speecifications
4Cement concrete 1:4: 8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
5Refilling the basement with excavated earth including cost and conveyance of all materials to site and all labour charges etc., complete.
6Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc., complete.
7Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc., complete.
8Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc., complete.
9Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc., complete
10Supplying and fabrication of steel for R.C.C.works including cost and conveyance to site and all labour charges etc., complete.
11Brick work in C.M.1:5 mix using country Bricks including cost and conveyance of all materials to site and all labour charges etc., complete.
12Supplying and fabrication of steel for R.C.C.works including cost and conveyance to site and all labour charges etc., complete.
13Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc., complete
14Earth work excavation in hard gravelly soil with initial lead and lift in narrow Trench as per SS20 B for Foundation.
15Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard speecifications
16Cement concrete 1:4: 8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
17Brick work in C.M.1:5 mix using country Bricks including cost and conveyance of all materials to site and all labour charges etc., complete.
18Brick work partion in C.M.1:5 mix using country Bricks including cost and conveyance of all materials to site and all labour charges etc., complete.
19Providing Granolethic floor finish in cement concrete 1:2:4 mix using 10 -12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc., complete
20Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc., complete
21Dadooing of walls with Glazed tiles of size 15cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 including cost and conveyance of all materials to site and all labour charges etc., complete
22Plastering in C.M.1:5 mix,12 mm thick including cost and conveyance of
23Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.
24Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.
25Flooring with cuddapah slabs 50mm thick over a bed of concrete 100mm thick and pointed with cement mortar 1:3
26Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality
27Supplying and Fixing inposition of best quality make White glazed wash basin of size 550x 400mm
28Cost and supply of Steel Door -D(1.00x2.100m)
29Supplying and Fixing Steel Door sizes (0.90x2.10)
30Cost and supply of Steel Window (1.00x1.30m)
31Cost and supply of Glazed Ventilator (.90x0.45m)
32Cost of Rolling shutter
33White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc, comoplete
34Painting two coats of new plaster surface with Exterior emulsion paint including cost and conveyance of paint and all labour charges etc complete
35Painting two coats over new iron works using ready mixed enamel paintincluding cost and conveyance of paint and all labour charges etc complete
36Cost and supply of RCC Rings and Cover slab 1.50m dia including etc
37cost and supply of RCC Rings and Cover slab 0.90m dia including etc
38cost and supply of Sintex Tank 1000 liter including all labour charges etc
39Wiring with 2x2.5 sq.mm PVC unseathed SC
40Wiring with 2x2.5 sq.mm PVC unseathed SC
41Supply and fixing of WT Bulk head fitting with guard
42Supplying and fixing 1200 mm sweep A.C Celling fan complete with stepped election 30W regulator with 30mm down rod on the existing clamps (SD.No 106)
43Supply and run off 2 of 6sqmm polythene insulated
44Supply and run off 2 of 6sq.mm polythene insulated
45aluminium cable of 650v grade insuitable PVC rigid pipe
46b)Supply and fixing of single box type 40w plug fitting
47Supply and fixing of 16\\"x12\\" TW meter board suitable
48110mm rainwater pipe (4Kg/cm2)
4920mm PVC Finolex pipe (6Kg/cm2)
5020mm PVC Elbow
5120mm PVC Tee
5220mm PVC Tap
5320mm PVC Gatevalve
54GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58481063
AUTHORITY Local Bodies
TENDER VALUE 13.88 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of Public Distribution Shop Building At Pazhayaseevaram Village In Pazhayaseevaram Panchayat In Walajabad Panchayat Union. Under Mlacds 2026-27 . Est Amt : 1388000/-
Basic Detail
Tender No RC No 2757/2026/A3 DT 6/11/2026
Bidding Type Tender
Location
City Kanchipuram
State Tamil Nadu
Key Dates
Publish Date 11 Nov 2026
Submission Date 25 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 13.88 Lakhs
Tender Fee Ref. Documents
EMD 13880
Exemption Not Available
Document List
777f123a-6d39-4636-af52-0bc089542d83.html
BOQ_870142.xls
Price.pdf
Technical.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

777f123a-6d39-4636-af52-0bc089542d83.html

xls

BOQ_870142.xls

pdf

Price.pdf

pdf

Technical.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender