Tender For Providing False Ceiling,Wall Pannelling,Dining And Rest Room And Other Table ,Chair Arrangements To Assistant Commissioner Chamber At Zone Lll Office
Tender Value
14 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
17 days left
EMD
14000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing False Ceiling,Wall Pannelling,Dining And Rest Room And Other Table ,Chair Arrangements To Assistant Commissioner Chamber At Zone Lll Office
BOQ
| Sl. No. | Item Description |
| 1 | Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4” x 4-1/4” x 2-3/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 2 | Providing Lintel including all the cost and conveyance of all the materials cost of hire and labour charges for centering ,Cost of Steel and including cost of Reinforced cement concrete etc complete as per standard specification(1.00m x0.11x0.15m) |
| 3 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 5 | Supply and installation of Acoustical False Ceilin Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 15mm having volume density 270 kgs / m3, we kg/m2 which is suspended by using 0.3mm thick metal grid system. The T15 metal grid system of 600mm module includes WA15 W30 wall angle mequal flanges of 15 / 19mm, length 3000mm, ong the perimeter of walls with the help of nylon sle nd suitable fasteners at 300mm centers. Then sus e MT15 W36 MainT with flange width 15mm, h 2mm and length 3600mm, from the soffit slab with soffit cleat and wire rod with leveling spring cl 200mm centres. CT15 W12 CrossT with flange mm, height 26mm and length 1200mm is interla co the pre-cut slots in the Main T15 at 600mm ce the perpendicular direction to the Main T15. F 15 W06 CrossT with flange width 15mm, height 2 d length 600mm are interlocked into the precut the CT15 W12 CrossT in direction parallel to the 5 to result in 600 x 600mm module. Mineral F G Core Ceiling Tiles of size 595 x 595 x 15mm sh ced into the grid size of 600 x 600mm. The sys achieve noise reduction coefficient not less tha C, so as to have an neat appearance as directed b artment offices. The cost includes, cost of mat of labour, Scaffolding, transportation, convey - complying to standard specication.PWD SOR 25-26 Page 99 Unique Code M-0623 |
| 6 | Providing Wall Panelling using one side teak wood shee with melamine polishing with following specification. Th frame using aluminium tubular section of size 50mm 25mm x 2mm thick fixing horizontally and vertically position with wall at interval of 0.60m in both diretion fixing water proof plywood of 12mm thick over th aluminium frame work with necessary screws. One sic teak wood sheet of 3.5mm thick will be fixed over th plywood using adhesive and finishing with melamin polishing and the rate inclusive of conveyance to si and labour charges and as directed by the Department Officers. The design pattern, water proof plywood, OS sheet and other materials to be used shall be got approve by the Executive Engineer concerned before use on wo etc., complete.As per PWD 25-26 page no 117 Unique code M-0704 |
| 7 | Solid PVC Door Shutters using 19 Gauge19mm MS Square tubes for styles and outer frames. 15mmMS square tubes for top, lock and bottom rails. the steel tubes shall be covered with 5mm thick solid P Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm . The over all size of top rail, lock rail rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter as per PWD SOR 25-26 Page no 84 Unique code M-0391 |
| 8 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)Dadooing with printed design colour glazed tiles of size 150mm x 150mm x 6mm |
| 9 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Designed Ceramic Tiles of size 200x 200 x 6mm |
| 10 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)Dadooing with granite tiles of synthetic grey, paradise, and similar/other varieties of suitable sizes/ ceramic tiles/vitified/ glazed tiles |
| 11 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)Colour glazed European Water Closet with 12.5 litre capacity procelin flushing tank fixed with CI bracket |
| 12 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)PVC Nahani Trap of size 100 x 75mm with pvc gratings |
| 13 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).colour glazed wash hand basin with pedestal |
| 14 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)Swan Neck tap |
| 15 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of followingsize , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 16 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 17 | Supplying and fixing best approved best quality Procelain CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 18 | Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)Colour glazed earthernwerelipped mouth flat back urinal |
| 19 | Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. |
| 20 | Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers. |
| 21 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means |
| 22 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers.Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 23 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 24 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 25 | Supply and delivery ,fixing of Manhole Cover SFRC 600mmx600mm including all the cost and conveyance of materials to work site including all the labour charges for fixing etc complete as per PWD SOR 25-26 Page No 123 Unique Code Unique Code M-0714 |
| 26 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 27 | Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 28 | Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.Clear size 0.60x0.6 |
| 29 | Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers.(3.00m Height) |
| 30 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 31 | 110mm dia 6kg/Sq.cm PVC pipe |
| 32 | 75mm dia 6Kg/Sq.cm PVC Pipe |
| 33 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 34 | 110mm dia PVC Elbow |
| 35 | 75mm dia PVC Elbow |
| 36 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply Above ground level. |
| 37 | 25mm Dia 10Kg/Sq.Cm PVC pipe |
| 38 | 20mm dia 10kg/Sq.cm PVC |
| 39 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - External water supply - above ground level/Below ground level |
| 40 | 25mm Dia PVC Coupler |
| 41 | 25mm dia PVC Elbow |
| 42 | 20mm dia PVC Coupler |
| 43 | 20mm dia PVC Elbow |
| 44 | 25mm x20mm dia PVC Reducer |
| 45 | 20mmx15mm dia PVC Reducer |
| 46 | Supply and delivery and fixing of Wall Mounting Fan including cost and conveyance of materilals to work site including all the labour charges for fixing 450mm dia as per PWD SOR 25-26 Page No 217 Unique Code M-1356 |
| 47 | Supply and delivery ,Fixing of 300mm dia AC Exhaust Fans(12\\")Sweep(Heavy duty) including all the cost and conveyance of materials to work site as per PWD SOR 25-26 Page No 217 Unique Code M-1343 |
| 48 | Supply and delivery ,fixing Call bells including all the cost and conveyanvce of materials to work site as per PWD SOR 25-26 Page No 216 Unique Code M-1328 Gong Bell 12 Size Suitable for 250V |
| 49 | Supply and fixing of 1200mm (48\\")Sweep AC ceiling fan 5Star rated Complete(Higher End)with 2 moudle 100w fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18\\") SD 477 Electrical Data 25-26 |
| 50 | Supply and fixing of 12 way Single pole and neutral MCB Sheet steel enclosure distribution board with double door metal with 1No 40A DP MCB Isolator as incoming and 10nos 6A to 32A SPMCB as outgoing in flush with wall with earth connection only Higher end SD 537Electrical Data 25-26 |
| 51 | Supply and installation of AIR -Conditioner with Copper Coil including all the cost and conveyance of materilas to work site as per PWD SOR 25-26 Page No 251 1.5TR Split type AC unit -5 star Rated unique code M-1984 |
| 52 | Supply and installation 5KVA Capacity Automatic voltage Stabilizer with time delay relay including cost and conveyance of materials to work site as per PWD SOR 25-26 Page No 252 Unique code M-1989 |
| 53 | Supply and laying of 5/8\\" and 3/8 copper pipe (Extra Beyond 3 Metres supplied with AC Unit )PWD SOR 25-26 Page no 252 Unique code M-1990 |
| 54 | Supply and delivery Director & Executive L-Shape Office Table Luxury with Side Runner, Drawer and Storage - Wire Manager - Brown Particle Board / 6 Ft x 3 Ft including all the cost andc onveyance of materilas to work site etc completed |
| 55 | Supply and delivery Wooden Director Office Chair Recliner High Back Leatherette Ergonomic Executive Swivel Chair for Office & Home (Brown) |including all the cost andc onveyance of materilas to work site etc completed |
| 56 | Supply and deliveryOffice Chair Visitor Chair with arm Rest with Steel Frame and Cushioned seat Back, Chair Without Wheels Holds up to 140 kg Heavy Design including all the cost and conveyance of materilas to work site etc completed |
| 57 | supply and delivery of Wooden Dining Table 2 Seater for Dining Room with Cushioned Chair including all the cost and Conveyance of materilas to work site etc completed |
| 58 | supply and delivery of Plastic Armed chair including all the cost and Conveyance of materilas to work site etc completed |
| 59 | Supply and delivery sofa 6'x2' including all the cost and conveyance of materials to work site etc complete ` Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender