Tender For Proposed Rising Main Water Supply From Meil Tapping Point To Gramadihi Ie, Khurdha
Tender Value
77.63 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
77639
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Rising Main Water Supply From Meil Tapping Point To Gramadihi Ie, Khurdha
BOQ
| Sl. No. | Item Description |
| 1 | Earth work : |
| 2 | Rate per 100Cum including Labour Cess |
| 3 | Exavaction of pipe line trench in laterite rock or any hard rock(other than granite or disintegrated rock)removed by Mechanical means including dressing and levelling and benching the bed not exceeding 1.50 depth & depositing the soil within intial lead of 50m & as per specification approved by the department. |
| 4 | Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC. |
| 5 | Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC. |
| 6 | Providing all materials, labour, T&P for laying of centrifugally cast (Spun) Ductile Iron pressure pipes for water works purpose with socket & spigot ends confirming to IS-8329/2000 with 3rd revision in standard lengths for classification K-9 suitable for push on joints (Rubber Gasket 'D' jointing) with outside zinc coating as per IS-8329/2000 including alligning the pipes inside trench as per IS-12288/1987 including testing the pipe line with required water pressure as per IS-8329/2000 amendment 1st, Sep. 2011 etc.all complete as per specification & direction of EIC (Excluding cost for earth work, jointing of specials, rubber gasket & fittings which shall be paid separately). |
| 7 | a)250mm Dia D.I K-9 Pipe |
| 8 | Labour for pushon joints only |
| 9 | a)250mm Dia D.I K-9 Pipe |
| 10 | Providing all materials, labour, T&P and laying in trenches following D.I fittings & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. confirming to IS-9523:2000, 1st revision with pressure rating PN-1.0 of following nominal diameter, all complete including test the joints with required water pressure as per specification & direction of EIC. (Excluding cost of earth work in trenches, back filling & rubber gasket) |
| 11 | 250mm dia MJ Collar |
| 12 | 250mm dia Flange Socket |
| 13 | 250mm dia Flange Spigot |
| 14 | 250mm DI 90 degree Bend |
| 15 | 250mm DI 45 degree Bend |
| 16 | Providing all labour, T&P and making push-on joint with rubber gasket ring as per IS-5382/1985 1st Revision suitable for D.I pipe and fittings of the following nominal dia including testing of the joints with required water pressure (The cost is inclusive of cost of ring) and all complete as per specification & direction of E.I.C. |
| 17 | Push on Joints with labour and fitting charges |
| 18 | 250mm Dia D.I K-9 Pipe |
| 19 | Providing all materials, labour T&P for laying of following dia MS pipes with required size of fittings, like off set, bend, tapper etc. as per site condition for water works purpose.(The pipes shall be painted with two or more coats of approved anticorrosive Epoxy paint of approved shade ) and aligning the pipes below/ above the ground level as per site condition as per specification and direction of EIC. |
| 20 | 250mm Dia MS PIPE |
| 21 | 200mm Dia MS PIPE |
| 22 | 80mm Dia MS PIPE |
| 23 | Providing all materials, labour, T&P for fixing MS flanges suitable for following dia MS pipe including cutting the pipes by oxygen and acetelene gas flames as per the required size and slope and electric welding the same with the pipes as per IS specification including cost for hire and running charges of all machine with POL. (The flanges shall be made out of following thickness plate after cutting as per required size and shape, drilling of bolt holes as per IS specification, painting the same with two or more coats of anticorrossive paint (Epoxy), the cost inclusive of hire & running charges of machineries, POL, To & Fro charges with all consumables, testing of the joints with required water pressure etc. all complete as per specification and direction of EIC. |
| 24 | MS flange (12mm thick) suitable for 250mm dia (NB) MS pipe as per IS 6392/1971. |
| 25 | MS flange (10.mm thick) suitable for 80mm dia (NB) MS pipe as per IS 6392/1971. |
| 26 | Providing all materials , labour, T&P for making flange joints with the pipes & fittings including supply of required & approved size of M.S. nuts & bolts, washer & rubber insertion & paints etc. including testing the joints with required water pressure etc. all complete as per specification & direction of EIC. |
| 27 | 250mm size Flange joint |
| 28 | 80mm size Flange joint |
| 29 | 250 /200/250 MS TEE |
| 30 | Providing, fitting & fixing of following size valves as per IS specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. (Make :-Kirloskar / Vag/ Audco) |
| 31 | 250mm dia D.I Sluice valve (Non rising spindle) of PN-1.6 as per IS-14846/2000 with ISI mark. |
| 32 | 250mm dia D.I Non Return Valve (Non rising spindle) of PN-1.6 as per IS-14846/2000 with ISI mark. |
| 33 | 80 mm dia DI Tamper proof kinetic air valve with metal strap for pipe of PN-1.6 as per IS-14845/2000 with ISI mark. |
| 34 | 80mm dia D.I Sluice valve (Non rising spindle) of PN-1.6 as per IS-14846/2000 with ISI mark. |
| 35 | Providing all materials, labour and T&P required for construction of Flyash Brick valve chamber of following minimum size including cost for rigid, levelled & plumbed centering & shuttering. The minimum thickness of RCC roof slab shall be not less than 125mm,Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed. PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 150mm thick, earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing and fixing pre-cast factory made RCC man hole cover with frame of clear opening of 600mmx450mm. and specification including cost of all materials, labour, T&P, royalties, all taxes and hire & running charges of machineries with POL etc. all complete as per specification & direction of EIC. |
| 36 | Inner size 1200mm x 1200mm x 1500mm height valve chambers |
| 37 | Construction of RCC M-20 thrust block of following minimum size having minimum cube strength 200Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel centering materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed, PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing etc. all complete as per specification & direction of EIC. |
| 38 | RCC Thrust block of size 1000mm x 1000mm x 1000mm height |
| 39 | Supplying all materials , Labour Tools & plants for dismantling of Bituminous courses flexible pavemants and disposal od dismantled materials up to a lead of 1000 mtr ,stacking serviceable & unserviceable material separately all complete as per specification & the direction of engineer-in-charge. |
| 40 | 600.0mtr x 1.0mtr x 0.3mtr |
| 41 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .For repairing road work |
| 42 | Cement concrete (1:2:4) with 12mm size crusher broken hard granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete. |
| 43 | Providing all materials, labour T&P for gas cutting of 8mm thick MS Pipe by oxygen and acetylene gas flame, fitting and setting as per required size to IS specification and electrodes confirming to IS specification after \\"V\\" grove cutting including cost of hire and running charges of generator set etc |
| 44 | Providing all materials, labour T&P for Welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site or Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site including cost of hire and running charges of welding generator set etc |
| 45 | Crossing by HDD MethodProviding all labour, T & P with required machinareis for crossing the Railway Line in of required depth by Horizontal Directional Drilling (HDD) method including pushing 350mm (NB) Dia M.S. pipe suitable for casing pipe, laying of 250mm Dia M.S. carrier pipe, , design, drawing approved by Railway authority etc. All complete as per dircetion of EIC. (Excluding cost of M.S. pipe). |
| 46 | Supplying all materials labour T&P for providing M.S pipe conforming to IS 3589 & IS: 3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO 0501-1 followed by 600-700 Micron two component 100% solid solvent free liquid epoxy coating as per AWWA-210-07, including or supplying of all labour material tools & plants required to perform the work etc. all complete. As per direction of Railway authority/EIC |
| 47 | 350 mm dia Casing pipe |
| 48 | Supplying all materials, labour and T&P for Providing & foxing High Density Polyethylene spacers between casing & carrier pipe to avoid contact 2.5 m c/c all complete as per specification (Report No. BS 105; GUIDELINES No's ON PIPELINE CROSSINGS UNDER RAILWAY TRACK) and direction of Engineer In-Charge |
| 49 | GST will be paid Extra as per Applicable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender