Tender For Construction Of Observation Tower (Watch Tower) At Karanji Prf, Kusunpur Beat Of Safa Section Under Dalijora Range In The District Of Cuttack For The Year 2025-26
Tender Value
44.45 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
1 days left
EMD
44456
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Observation Tower (Watch Tower) At Karanji Prf, Kusunpur Beat Of Safa Section Under Dalijora Range In The District Of Cuttack For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in Excavation of foundation in all kinds of soil up to the required depth including Moorum, stony earth and earth mixed with boulders except sheet rocks and boulders requiring blasting including dressing, leveling the bed and depositing the excavated materials away from work site with initial leads and lifts, T&P shoring, shuttering and dewatering if required etc, complete as directed by Engineer-in-charge. |
| 2 | Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge. |
| 3 | Cement concrete (1:4:8) using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing, centering & shuttering for covering columns, scaffolding etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with sundries, T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 4 | R.C.C work of M-20 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge. (i)Column Base & Footing |
| 5 | (ii)Grade Beam |
| 6 | (iii)Column in Super Structure |
| 7 | (iv)Lintel |
| 8 | (v)Wall beam |
| 9 | (vi)Stair Case |
| 10 | (viii)Roof slab |
| 11 | Cutting, straightening coiled or bent up M.S. Rod or tor steel including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 12 | Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in FOUNDATION, PLINTH AND BASEMENT and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 13 | Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in SUPERSTRUCTURES in all floors including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 14 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 15 | Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 16 | Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge. |
| 17 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, made out of M.S Square bar/ flat as per approved drawing and design including priming with red oxide primer making holes in walls and R.C.C structure, wood work etc., and making good to the damages to walls with cement concrete (1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) of approved quality with cost of all materials, labour, cost of welding, all T&P, sundries etc. complete in all respect as per specification & direction of the EI.C. (Screws & other hardware required materials to be used in the work shall be of approved quality & specification & shall have to be supplied by the contractor at his own cost.) |
| 18 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures including cost of all materials, labour, T&P etc. complete. |
| 19 | Supplying, fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 20 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixture including cost of all materials, labour T&P etc. complete. |
| 21 | Providing fitting & fixing of 12mm thick plain glass (1484.03 +Wastage 5% 74.20 + Labour 82.00+Cess 16.40) including all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. |
| 22 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32 x 32 x 2mm @ 0.90m c/c & stainless square pipe bracing of size 32 x 32 x 2mm in stair etc. Data for 3.26 Rmt |
| 23 | Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. |
| 24 | Painting two coats with approved synthetic enamel paints of approved colour, shade to new iron work over a coat of wood primer & red oxide primer respectively including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 25 | Wall Painting Two Coats With Plastic Imulsion Paint. Over a Coat of Primer upto any height in all floors including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. |
| 26 | Finishing wall surface with Cement putty including cost, conveyance, taxes of all materials and labour, T&P etc. complete. |
| 27 | Providing fitting and fixing of vitrified floor tiles in Dado of approved make & colour laid over 25mm thick cement mortar bed of prop.(1:1) to proper slope & level joined with neat cement slurry with approved colour pigment to match the colour of tiles including watering and curing, cost of all labour, T&P, cost, conveyance and royalty, taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. |
| 28 | Providing, fitting and fixing of ceramic glazed wall tiles of size 300mm x300mm/ 200X200mm of approved make & approved colour in wall surface over 12mm thick cement mortar of prop.(1:3) joined with neat cement slurry of approved colour pigment to match the colour of tiles including watering and curing, cost of all labour, T&P, cost, conveyance and royalty, taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. |
| 29 | Providing fitting & fixing Granite tiles size 0.40 sqm (10mm to 20mm) in Dado, Skiting & raiser of steps on 12mm thick CM bed (1:3) including all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. |
| 30 | Gypsum false ceiling with Alluminium frame including cost, conveyance, taxes of all materials and labour, T&P etc. complete. |
| 31 | Providing, fitting & fixing of decorative boarder of gypsum board ceiling including cost, conveyance, taxes of all materials and labour, T&P etc. complete. |
| 32 | Earth work in filling in foundation and plinth with excavated earth deposited at worksite including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete as per direction of Engineer-in-charge. |
| 33 | Cement Concrete (1:2:4) with 12mm size B,H,C,B,Gr chips of approved quality including watering, curing, with cost, conveyances, taxes of all materials and cost of all labour T&P etc. complete. |
| 34 | Providing, fitting & fixing of dressed seasoned Sal wood work for framed doors & windows including fixing the same with required hardware fittings with cost, conveyances, taxes of all materials, cost of all labour with T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. |
| 35 | 20mm thick grading concrete (1:2:2) on roof slab with 6 mm isize hgcb chips including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender