Tender For Special Repairs To Sambavarvadakarai Periyakulam Supply Channel At Sambavarvadakarai Village Of Kadayanallur Taluk And District.
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
2500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Sambavarvadakarai Periyakulam Supply Channel At Sambavarvadakarai Village Of Kadayanallur Taluk And District.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for cut opening tank bund excavation with initial lead of 10m and lift of 2m in hard stiff clay , stiff black cotton soil, hard red earth, shale’s, murams, stony earth and earth mixed with small size boulders and hard gravelly soil etc, complete as directed by the Engineer in charge of works and as per the technical specifications. |
| 2 | Dismantling, Clearing away and carefully stacking materials useful for reuse of any thickness of walls in Brick or Stone masonry in Cement mortar wall under 3m as directed by the Engineer complying with specification. |
| 3 | Dismantling, Clearing away and carefully stacking materials useful for reuse of any thickness of walls in Plan Cement Concrete as directed by the Engineer complying with specification. |
| 4 | Earth work excavating and depositing on bank with an initial lead of 10M and initial lift of 2m in hard stiff clay stiff block cotton, hard red earth shales, murrams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil SS 20 B for foundatation. |
| 5 | Providing and placing in position Plain Cement Concrete of M10 Graded mix using hard granite coarse aggregate of (well graded ) size of 40mm down graded to IS specified graiding ( to achieve the specified characteristic strength of 10N/mm2 in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by baling / pumping and dewatering wherever necessary placing in layers watering, curing , finishing the surface with all leads and lifts, etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying withstandared specifications and as directed by the Engineer incharge of work |
| 6 | Providing steel centering for plain surfaces including strutting upto3m high using MS sheets, 10 gauge thick of size 90cmx60cm, stiffened with Ms angles of size 25mmx25mmx3mm laid over silver oak joists of size 10cmx6.5cm spaced at 90cm c/c and supported by caserne props of 10cm to 13cm diametre spaced at 75cm c/c and removing the centering and shuttering after specified period without damaging the concrete laid, complying with standard specification and as directed by the Engineer. |
| 7 | without Strutting |
| 8 | with strutting |
| 9 | Providing and placing in position Plain Cement Concrete of M15 Graded mix using hard granite coarse aggregate of (well graded ) 60% of nominal maximum size of 40mm and 40% of nominal maximum size of 20mm and downgraded to IS specified grading (to achieve the specified characteristic strength of 15 N/ mm2 in 28 days ) and mixing the ingredients in approved mixer including dewateringof the placement site, by balling /pumping and dewatering wherever necessary placing in layers ,and vibrating ,watering, curing ,finishing the surface with all leads and lifts etc ., complete in all respects so as to to attain the profileand strength as specified in the drawings andspecification etc., completecomplying with standard specification and asdirected by the Engineer in charge of work.complying with standard specification. |
| 10 | Providing and placing in Position of Plain cement concrete of grade M15 using hard broken stone aggregate of maximum nominal size of 20mm to IS specified grading mixing by mixer machine including dewatering the placement site, laying the concrete in layers and in bays vibrating, compacting and finishing the surface with all leads and lifts watering curing to attain the profile and strength as specified in the drawing for various depth and height below and above ground level etc complete as directed by the Engineer in charge of work complying with the standard specification |
| 11 | Providing and placing in position of Reinforced cement concrete of grade M 25 using hard well gradedaggregates with the nominal maximum size of coarse aggregate of 20mm weigh batching the ingredients and mixing in approved mixers/batching plant ( to produce concrete of the specified characteristic strength of 25N/mm2 at 28 days) including dewatering the placement site by bailing/pumping and by diverting wherever necessary laying the concrete in layers of not exceeding 15cm thick and in bays vibrating, compacting and finishing the surface with all leads and lifts, watering curing complete so as to attain the profile and strength specified in the approved drawing & specifications and excluding the cost component of providing rigid and smooth centering for soffits of reinforced cement concrete slab or plain surface wherever necessary for various depths below ground level and various heights above ground level etc., complete as directed by the Engineer in charge of works and as per the technical specifications. |
| 12 | Supplying, fabricating and placing in position of HSD (high Yield Strength) bars for all reinforced cement concrete works including cost of binding wire, steel rods, conveyance charges and labour charges etc., complete, complying with standard specifications and as directed by the Engineer in - charge of work.. (Specification No.9.1 to 9.12.1) |
| 13 | Refilling with excavated earth (other than sand) complying with the standard specification for filling in foundation and basement etc complete as directed by the Engineer in charge of work complying with the standard specification. |
| 14 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete. GST 18% Please Enable Macros to View BoQ information |
| 15 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete. GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender