Tender For Special Repairs To The Section Office Building At Kudiyiruppu Campus In Tenkasi Taluk And District.
Tender Value
4 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To The Section Office Building At Kudiyiruppu Campus In Tenkasi Taluk And District.
BOQ
| Sl. No. | Item Description |
| 1 | Clean removal of cement plaster from walls and racking out joints 20mm deep or from terraced roofs racking out joints 12mm deep |
| 2 | Dismantling, clearing away and carefully stacking materials useful for re-use for Plain Cement Concrete. |
| 3 | Dismantling Doors and Windows including removal of frames, hinges and fastenings. |
| 4 | Dismantling, Clearing away and carefully stacking materials useful for reuse of any thickness of Pressed Tiles & Weathering Course as directed by the Engineer complying with specification (38 G) |
| 5 | Earthwork excavating and depositing on bank with an initial lead of 10 meter and initial lift of 2 m for foundation in hard stiff clay soil including refilling the sides of foundation with excavated earth SS 20 B for narrow excavation. |
| 6 | Cement Concrete 1:5:10 (One cement, Five sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers. |
| 7 | Special ceiling plastering and finishing the exposed surface of RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc. with Cement Mortar 1:3 (One Cement and Three Sand) 10 mm thick including hacking the surfaces and providing Cement Mortar nosing, beading for sunshades, staircases, steps, landing slabs and finishing, curing, etc., in all floors complying with standard specification as directed by the departmental officers |
| 8 | Paving the floor with best quality Double charged Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 9 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12 mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 10 | Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime in the proportion of brick jelly to lime being 32 to 12 1/2 by volume and laid over the RCC roof slab in a single layer and consolidated to the finished thickness by beating the concrete with wooden, beaters of approved pattern keeping the surface constantly wet by sprinkling jaggery and lime water etc. complete complying with standard specification. |
| 11 | Finishing the top of roof with one course of approved first quality Machine Pressed Tiles of size 230mm x 230mm x 20mm thick of approved quality laid in Cement Mortar 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound confirming to Indian standard as approved by the departmental officers at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same mortar mixed with the water proof compound and red oxide etc. complete complying with standard specification. |
| 12 | Manufacturing Supplying and fixing of steel sheeted doors with following specification. MS angles of size 40x40x6mm at 3.50 kg./rm. used for outer frame and MS angles of size 35x35x5mm at 2.60 kg./rm.for the shutter frame.stiffeners with 32 x 6 mm M.S.flat at 1.50 kg./rm is provided as the lock rail of the door and welded intact on both ends to the shutter frame.18 gauge CR sheets of best quality is laid as panel in the shutter frames 16 x 5 mm M.S.flat at 0.60 kg./rm.is welded over the 32 x 6 mm M.S.flat at 1.50 kg./rm.on the rear side of the door sandwitching the CR sheet for rigidly. Additional stiffeners with 16 x 5 mm M.S.flat at 0.60 kg./rm. are provided diagnally on the rear side of the shutter. 2nos of hinges in case of single leaf and 4nos of hinges in case of double leaf shutters is provided.. 6 nos hold fasts 200 mm length made out of 40 x 40 x 6 mm M.S. angle spliced at the ends are welded to the outer frame of door. Tower bolt- 2nos. one at the top and the other at bottom are provided. One no of aldrop is provided in case of double leaf door at lock rail section in the door.In single leaf doors, one more aldrop is provided in the inner side of the lock rail section of the door, one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place in case of a double leaf door M.S,flat 32 x 3 mm at 1.10 kg./rm. is provided on the edge of the one shutter to conceal the gap between the two shutters.A tie bar is provided at the bottom of the outer frame to prevent twistling of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers.The rate is inclusive of cost of all materials labour charges, taxes transportation to the site of work, loading, unloading and all other incidental charges etc., complete.(Size 0.9m x 2.1m) |
| 13 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. |
| 14 | Supplying and Fixing in position mild steel grills for windows, ventilators,etc. |
| 15 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 16 | Painting one coats of Old plastered wall surface with ready mixed Interior emulsion paint of first class quality and of approved colour coat including cleaning the surfaces and necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 17 | Painting one coats of Old plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour coat including cleaning the surfaces and necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 18 | Painting new iron works such as steel doors, windows, ventilators window bars balustrades etc. with two coats of best approved first quality and colour of synthetic enamel paint over the existing red-oxide priming coat in all floors excluding cost of priming coat etc. complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 19 | Paving pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 in Cement Mortar 1:3 (One Cement and Three crushed stone sand), with required Cement Slurry and Mortar Plasticizer, 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 20 | Supplying and fixing 20W LED Light for T8 fittings (Single side) |
| 21 | Supplying and fixing 48” Ceiling Fan High Speed (without Regulator) GST 18% Please Enable Macros to View BoQ information |
| 22 | Supplying and fixing 48” Ceiling Fan High Speed (without Regulator) GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender