Tender For Special Repairs To Rajakkalmangalam Anicut In Rajakkalmangalam Village Of Nanguneri Taluk In Tirunelveli District
Tender Value
5 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
14 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Rajakkalmangalam Anicut In Rajakkalmangalam Village Of Nanguneri Taluk In Tirunelveli District
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size of boulders hard gravelly soil inclusive of shoring to full depth strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated soil other than sand in layers of not more than 15 cm thick, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 metres and initial lift of 2 metres and clearing, levelling the site etc., complete complying with standard specification for FOUNDATION. |
| 2 | Drilling holes 50mm dia in existing body wall for placing anchor rods etc. complete |
| 3 | Grouting the holes of 50mm dia with w/c ratio of 0.33 in the existing anicut body wall provided at a spacing of 45 cm c/c in the horizontal surface for fixing anchor rod of 16mm dia RTS of 1m length in a such position that 60 cm length embeded into top of the masonry wall and 40 cm length projected and bend out side the wall including cleaning the drilled hole fixing the rod and other incidential charges etc., complete complying with standard specification and as directed by the departmental officers |
| 4 | Supplying, fabricating and placing in position of HSD (high Yield Strength) bars for all reinforced cement concrete works including cost of binding wire, steel rods, conveyance charges and labour charges etc., complete, complying with standard specifications and as directed by the Engineer in - charge of work. |
| 5 | Supplying and erecting water tight steel centering for sides and sofits including supports and strutting upto 3.29M height for plain surface such as RCC slab, vertical slabs, side slabs of RCC works wioth all cross bracings using mild steel B.G.10gauge sheets of size 90cm x60cmx10 gauge stiffend with welded mils dteel angels of size 25mm x25mmx3mm for boarding laid over silver oak(country wood) joists of size 10cmx6.5 spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification and as directed by the Engineer incharge of work (The retrieved materials should be taken back by the contractor). The payment should be made after the concrete is laid. |
| 6 | Without strutting |
| 7 | With strutting |
| 8 | Providing and placing in position of Reinforced cement concrete of grade M 20 using hard well gradedaggregates with the nominal maximum size of coarse aggregate of 20mm weigh batching the ingredients and mixing in approved mixers/batching plant ( to produce concrete of the specified characteristic strength of 20N/mm2 at 28 days) including dewatering the placement site by bailing/pumping and by diverting wherever necessary laying the concrete in layers of not exceeding 15cm thick and in bays vibrating, compacting and finishing the surface with all leads and lifts, watering curing complete so as to attain the profile and strength specified in the approved drawing & specifications and excluding the cost component of providing rigid and smooth centering for soffits of reinforced cement concrete slab or plain surface wherever necessary for various depths below ground level and various heights above ground level etc., complete as directed by the Engineer in charge of works and as per the technical specifications. GST 18% Please Enable Macros to View BoQ information |
| 9 | Providing and placing in position of Reinforced cement concrete of grade M 20 using hard well gradedaggregates with the nominal maximum size of coarse aggregate of 20mm weigh batching the ingredients and mixing in approved mixers/batching plant ( to produce concrete of the specified characteristic strength of 20N/mm2 at 28 days) including dewatering the placement site by bailing/pumping and by diverting wherever necessary laying the concrete in layers of not exceeding 15cm thick and in bays vibrating, compacting and finishing the surface with all leads and lifts, watering curing complete so as to attain the profile and strength specified in the approved drawing & specifications and excluding the cost component of providing rigid and smooth centering for soffits of reinforced cement concrete slab or plain surface wherever necessary for various depths below ground level and various heights above ground level etc., complete as directed by the Engineer in charge of works and as per the technical specifications. GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender