Public Administrative Department Government Departments Closing in 0 days TDR #58478568

Tender For Annual Plan-Vadakkenchery Gramapanchayath-2025-26-Renovation Of Sub Centres--(Proj No-106/2025-26)-General Civil Work

Issued by Government Departments · Palakkad, Kerala
Tender Value
2.88 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
7203
Bank guarantee accepted
Document Fee
640
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Annual Plan-Vadakkenchery Gramapanchayath-2025-26-Renovation Of Sub Centres--(Proj No-106/2025-26)-General Civil Work

BOQ

Name of Work:- Annual Plan-Vadakkenchery Gramapanchayath-2025-26-RENOVATION OF SUB CENTRES--(Proj No-106/2025-26)-General Civil Work
Sl. No. Item Description
1Building Maintenance.
2OD519565/2025-2026:Supplying and fixing pressed steel Door standard pattern with frames as per profile of IS 4351 section 105mmx60mm using 18G (1.2MM THICK CR CA sheet/Gi sheet and shutters made of section 75cmx30cm outer styles and horizontal members and then inserted with enclosed and stiffened as per specification including all fittings such as tower bolt etc...Complete.
3OD519573/2025-2026:Supplying and fixing pressed steel window and ventilator of standard pattern with frames as per profile of section 82x62mm embossed sheet shutter 50mmx20mm special channel shutter ,12mm dia rod 25*5mm flat with 75mm SS hinges 50mm SS hook,125mm SS stay and handle for window with section 105mmx60mm using 16G sheet and shutter made of section 75cmx30cm outer styles and horizontal members and then inserted with stiffened sheet 26CR with Zincromat primer.
49.124.1:Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish
59.123:Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
618.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
717.9.1:Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm
850.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall
97.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
105.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
115.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
125.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
1350.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
1413.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
1513.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58478568
AUTHORITY Government Departments
TENDER VALUE 2.88 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Local Self Government Department
Work Description Tender for Annual Plan-Vadakkenchery Gramapanchayath-2025-26-Renovation Of Sub Centres--(Proj No-106/2025-26)-General Civil Work
Basic Detail
Tender No ET-01/2026-27/AE/LSGD/VDY
Bidding Type Tender
Location
City Palakkad
State Kerala
Key Dates
Publish Date 11 Nov 2026
Submission Date 21 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 2.88 Lakhs
Tender Fee 640
EMD 7203
Exemption Available
Document List
508de846-06fc-4b72-9201-c6ffeac55696.html
AFFD106.pdf
BOQ_1515597.xls
EPAYFORM.pdf
FT106.pdf
IPACT.pdf
PA106.pdf
SBD106.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

508de846-06fc-4b72-9201-c6ffeac55696.html

pdf

AFFD106.pdf

xls

BOQ_1515597.xls

pdf

EPAYFORM.pdf

pdf

FT106.pdf

pdf

IPACT.pdf

pdf

PA106.pdf

pdf

SBD106.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender