Tender For R&M Works To 220/132/33 Kv Gss Control Room At Kuarmunda (Provision For Vehicle Shed)
Tender Value
8.46 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
8500
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for R&M Works To 220/132/33 Kv Gss Control Room At Kuarmunda (Provision For Vehicle Shed)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing Grass & removal of rubbish up to a distance of 50mtrs outside of the periphery of the area including cost, conveyance of all labour with T&P and all arrengements required for the work etc complete as per the direction of Engineer-in-Charge. |
| 2 | Earthwork Excavation in Foundation trenches in all kinds of soils with dressing and leveling the bed and sides Suitable to the drawing and design and depositing the excavated soil within initial lead of 50 mtr. and initial lift of 1.5 mtr Including cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 3 | Filling in Foundation and Plinth with sand well watered and rammed, laid in layers not exceeding 150mm in thickness suitable to drawing and design compacted to required depth etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineering charge. |
| 4 | Cement Concrete work of proportion (1:4:8) in bed of foundation / basement of floor etc. using 40mm size hard black crusher broken granite stone metal of approved quality and from approved quarry laidd in layers not exceeding 150mm thick compacted to required depth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 5 | Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Column footing and stem upto plinth using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 6 | Brick masonry work with cement mortar (1:6) in Foundation and Plinth using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2%and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 7 | Providing & supplying for fitting & fixing of MS Struss, Poles, Rafters & purlins etc. made with M.S. Angle, Channel, Iron Tubes and flats etc. including cutting into size, making welding/bolting etc. placing in proper position embeding with cement concrete & finishing with cement plaster as per required dimension confirming to drawing and design including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 8 | Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Plinth Band using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 9 | Providing and Making Re-enforcing Grills for RCC works with MS rod,tor-steel of required diameter and binding wires of 18 to 20 gauge with straightening, cutting, bending, binding, tying the grills and placing in position suiting to the form-work for RCC structural member as per the drawing and design at site including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge.(Payment shall be made on weight of MS rod/tor-steel only and no separate payment for binding wires) |
| 10 | Brick masonry works with cement mortar (1:6) in Super Structure using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2% and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 11 | Providing and supplying for Roofing Works using Galvanised-Colored-Corrogated-Iron- (GCCI) Sheets on gable roof houses including hoisting, lowering, laying and placing the iron sheets in proper position for fitting and fixing over roof truses, rafter, purlins with drilling holes in wind ties and fixing of ridges, valleys, wind ties etc complete by means of fittings and fixtures like J/L hooks nuts. bolts, bitumen/MS washer and sealing materials like Pitch, coaltar, putty, paint etc sealed around the hooks in the holes etc complete in all respect including cost, conveyance, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in-charge. |
| 12 | Providing Cement Concrete of grade M-20 (1:1 ½ :3) using 12mm(½\\") size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of shuttering including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 13 | 12mm thick Sand and Cement plaster of proportion (1:6) finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 14 | 16mm thick Sand and Cement plaster of proportion (1:6) finished smooth over rough surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 15 | Providing Cement Washing one coat with good quality port land cement and water properly mixed, washed and finished over plastered surfaces after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 16 | Providing for Finishing surfaces of walls with Acrylic wall putty (water based) of approved quality and make and finished smooth and even surface to receive painting etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements for scaffolding, staging etc required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 17 | Providing Primming one coat with primer over plastered surface of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 18 | Providing for Weather coat two coats of approved quality, make and shade washed and finished smooth over exterior surfaces of wall etc after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 19 | Providing Floor Tiling works in floors, treads,on steps and landing using Chequred tiles of premium grade and standard size of approve make & quality laid over a bed of 25mm thick cement mortar (1:1) and jointed with cement slurry mixed with pigments to match the shade of the tiles, finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 20 | Providing and Supplying for Removal and Disposal of surplus earth, debries, garbages etc with mechanical means like transportation by Truck /Tractor with loading and unloading of the materials to a distance up to 5 Kms etc complete including cost of Transportation charges and labour with T&P for collecting, loading, unloading, removal & disposal in all respects as per the direction of the Engineer-In-Charge |
| 21 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender