Tender For Day To Day Maintenance And Petty Repair Of B/R Complaints, Repair To Joinery, Roof And False Ceiling Of Area-I Of Age B/R-Ii Under Ge (West) Jabalpur.
Tender Value
75 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
27 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance And Petty Repair Of B/R Complaints, Repair To Joinery, Roof And False Ceiling Of Area-I Of Age B/R-Ii Under Ge (West) Jabalpur.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule \\"A\\" |
| 2 | S & F in repair water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor to match with existing complete all as specified and directed. |
| 3 | S&F in rep Vitreous China wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified. |
| 4 | S&F in rep Vitreous China, semi-pedestal pattern(Anglo-Indian Type),white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified. |
| 5 | S&F in rep one piece,Europen Water Closet snow-white,size 640X350X720 mm,complete all as specified. |
| 6 | S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets all as specified and directed by EIC. |
| 7 | S&F in repair Vitreous Cliina wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets |
| 8 | S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified. |
| 9 | S & F in repair bib taps cast copper alloy CP with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed by EIC. |
| 10 | S&F in rep Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). |
| 11 | S&F in repair,15 mm dia Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 12 | S & F in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed. |
| 13 | S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed. |
| 14 | S&F in repair cast copper alloy chromium plated shower rose fancy type fixed to 15 mm bore pipe all as specified. |
| 15 | S&F in rep Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 16 | S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. |
| 17 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm |
| 18 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 19 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 20 | Taking up or down 40 mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 21 | Supply & laying in of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 22 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 23 | Supply & laying of CPVC pipes 40 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 24 | S&F in repair stainless steel Soap dish, any type and size, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F in repairs for Towel Rail 600mm long of PTMT fixed with Towel Rail 600mm long of PTMT fixed with screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed . |
| 26 | S&F in Repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed . |
| 27 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed by EIC. |
| 28 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 29 | S & F 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints to wall complete all as specified. |
| 30 | S & F of 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints to wall complete all as specified. |
| 31 | S & F in repairs PVC (SWR) bends 110 mm dia bore any radius with access door all as specified and directed. |
| 32 | S & F in repairs PVC (SWR) bends 75 mm dia bore any radius with access door all as specified and directed. |
| 33 | S&F in repairs 110 mm bore PVC (SWR) junction single (Single T) equal or unequal. |
| 34 | S&F in repairs 75 mm bore PVC (SWR) junction single (Single T) equal or unequal. |
| 35 | S&F in repairs 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door. |
| 36 | S & F in repairs PVC (SWR) branch piece, single (double Y) 110 mm dia equal or unequal |
| 37 | S&F in repairs 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door. |
| 38 | S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal |
| 39 | S&F in repair PVC multi floor trap/Nahani trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75/110 mm, complete all as specified. |
| 40 | Repais to Door shutters of area exc 1 Sqm but n exc 2.00 sqm each resecuring without taking down as for easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge. |
| 41 | Easing of window shutters,(of any type or description), kitchen cupboard shutters, show case shutter of area n exc 1.00 Sqm each incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge. |
| 42 | Taking down shutter n exc 1.00 sqm of any description complete all as specified and directed by Engr-in-charge |
| 43 | Taking down shutter wooden/PVC exc 1.0 sqm but n exc 2.0 sqm each of any description complete all as specified and directed by Engr-in-charge |
| 44 | Taking down Chowkhats or frames wooden door/windows,PVC door,steel windows/ventilators,not exc. 1.5 sq. m each |
| 45 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each. |
| 46 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 47 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 48 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-charge |
| 49 | M&L for 35mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge |
| 50 | S&F factory made plain framed ,35 mm Panelled shutter (three Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle board with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge |
| 51 | S & F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as per specification & drawing and as directed by Engineer-in-charge. |
| 53 | S&F aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge. |
| 54 | S&F Butt hinges stainless steel 100 mm long complete. |
| 55 | All as per item No above but 75mm long size complete. |
| 56 | S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete, |
| 57 | S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete, |
| 58 | S&F and in repair Aluminium handles cast type anodised of 150mm complete. |
| 59 | S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-charge |
| 60 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-charge |
| 61 | S&F aluminium powder coated window sliding type (3 track), 1.5mm thickness of frame and shutter with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching, complete all as specified and directed by Engr-in-Charge |
| 62 | S&F aluminium powder coated louvered ventilators of 1.50mm thick frame including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching, complete all as specified and directed by Engr-in-Charge |
| 63 | S&F in repair 18-20 mm thick Acrylic Pvc Celuka Board,prelaminated one side with decorative choice lamination & other side balancing white lamination approved texture (\\"Celluka PVC ply of Rajshree make or equivalent in \\"sintex\\" as approved by GE) as in kitchen cabinet,Cupboard etc ( with shelves and partition ) including necessary fittings & fixtures as per manufacture's instrucions complete all as specified and directed by Engr-in-charge |
| 64 | M&L 6 mm thick cover fillets of standard hard board ,40 mm wide and fixing with screws complete all as specified and directed by Engr-in-charge. |
| 65 | S&F, 1st class HW Beads, straight ( 20 mm size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to store (Plain or moulding as requirement) complete all as specified and directed by Engr-in-charge |
| 66 | S&F 30 mm wide Steel Continous (piano) hinge, steel bright finish or electro galvanised etc complete all as specified and direcated |
| 67 | S&F and in repair 40 mm dia , SS cupboard knobs fixed with nut ,screw and washer of mild steel bright complete |
| 68 | S & F and in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete including necessary welding if fixed in steel door.complete all as specified and directed by Engr-in-charge |
| 69 | S&F Floor door stopper having overall length of cover plate 140 mm , cast aluminium alloy body and tongue anodised with double leg ,fixed in floor complete all as specified and directed by Engr-in-charge |
| 70 | S & F in repair Hasp and staple 75 mm , stainless steel, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge |
| 71 | S&F in repair for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed. |
| 72 | S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kg complete all as specified and directed by Engr-in-charge. |
| 73 | Welding in repairs n. exc 2.5cm in length , on metal of thickness n exc 6 mm , for fixing of door hing, door spring , welding in iron doors (one welder with helper as per requirment base must be depolyed with thin 24 hours . Other wise penlty Rupees 500 per day) complete all as specified and directed by Engr-in-charge |
| 74 | S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and as directed. |
| 75 | S & F in repair curtain rod 25 mm dia stainless steel with brackets, stops, rollers etc. and fixed in position complete. |
| 76 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 77 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar (1:4) |
| 78 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) |
| 79 | M&L light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed in cement mortar (1:4) |
| 80 | M&L light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) |
| 81 | M&L non skid coloured digital ceramic tiles 300x300/400x400 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified. |
| 82 | M&Lnon skid coloured digital ceramic tiles size of tiles 450x350/300x200/300x600x5 to 6mm thick vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4,, all as specified and directed. |
| 83 | Dismantling of Stone slabs and kota stone,Cuddappa stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed. |
| 84 | M&L for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed of CM (1:4) , as in tread and riser of staircase,steps , jambs, pillars, window- cills, complete complete as specified and as directed. |
| 85 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 86 | Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) |
| 87 | M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection,flooring etc,complete all as specified |
| 88 | M & L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate stone as in subbase, Hard standing and similar works |
| 89 | M & L for preparation of old plasterd or unplastered surfaces of wall and applying one coat of oil bound destemper complete all as specified and directed |
| 90 | M & L for preparation of old plasterd or unplastered surfaces of ceiling and applying one coat of oil bound destemper complete all as specified and directed |
| 91 | M & L for preparation old plastered or unplastered applying one coat of white wash of old surafce of wall complete all as specified and directed |
| 92 | M & L for preparation old plastered or unplastered applying one coats of cement base paint complete all as specified and directed by Engr-in-Charge. |
| 93 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6, including taking down old cement plaster,complete all as specified and directed by Engineer-in-Charge. |
| 94 | Material and labour for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement,including taking down old cement plaster, at any height, complete all as specified and directed by Engineer-in-Charge. |
| 95 | Material and labour for 5 mm thick cemet plalster in CM 1:3 over ceiling concrete surfaces finished even and smooth without using extra cement,including taking down old cement plaster,complete all as specified and directed by Engineer-in-Charge. |
| 96 | M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed. |
| 97 | M &L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed. |
| 98 | M &L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint any tint over pink primer all as specified and directed. |
| 99 | M &L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint of any tint all as specified and directed. |
| 100 | M & L for preparation of new plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper over 1 mm thick putty,Priming plastered and other surfaces with alkaliresistant priming paint complete all as specified and directed |
| 101 | M & L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over Priming plastered and other surfaces with alkaliresistant priming paint complete all as specified. |
| 102 | M & L for preparation of new plasterd or unplastered surfaces of wall and applying three coat of white wash complete all as specified and directed |
| 103 | Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work complete all as specified and directed by Engineer-in-Charge. |
| 104 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.(Note-WPC will be measurd and paid seprately) |
| 105 | Supply only integral water proofing compound |
| 106 | Applying evenly a coat of bitumen [email protected]/sqm on the top of dry surface of finished cement mortar plaster |
| 107 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 108 | Applying two coats of aluminum paint on top of membrane @ 0.20Kg/Sqm. |
| 109 | Disconnecting existing tanks,exc 500 n.exc 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 110 | Material and labour for 50mm thick sand filling under floors or in foundations including watering and consolidation complete all as directed. |
| 111 | Material and labour for 60 mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement and pigment, confirming to IS 15658-2006 complete all as directed. |
| 112 | Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles |
| 113 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 114 | Ditto all as per Srl item No above but except brick |
| 115 | Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6),complete all as specified and directed. |
| 116 | Dismantling water tanks and removing to store capacity 500 Ltr |
| 117 | Dismantling water tanks and removing to store capacity 1000 Ltr |
| 118 | Dismantling water tanks and removing to store capacity 1500/2000 Ltr |
| 119 | S&F 500 Ltr,Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all asspecified in SSR Part I including float valve,tank cover and tank nipple, complete all as specified and directed by Engr-in-Charge. |
| 120 | S&F 1000 Ltr,Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all asspecified in SSR Part I including float valve,tank cover and tank nipple, complete all as specified and directed by Engr-in-Charge. |
| 121 | S&F 1500 Ltr,Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all asspecified in SSR Part I including float valve,tank cover and tank nipple, complete all as specified and directed by Engr-in-Charge. |
| 122 | S&F 2000 Ltr,Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all asspecified in SSR Part I including float valve,tank cover and tank nipple, complete all as specified and directed by Engr-in-Charge. |
| 123 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, over Screed bed or bedding layer of cement mortar(1:6), 15 mm thick for laying floor finishes, including rubbing and mirror polishing complete all as specified and directed |
| 124 | M&L Machine cut kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, over 10 mm thick cement plaster (1:4), on fair faces of brick work or concrete surface as backing, including rubbing and polishing complete all as specified and directed |
| 125 | M&L for Cement concrete type E-2,1:5:10,(40 mm graded stone aggregayes) in foundations, filling and mass concrete as in sunken floor, complete all as specified and directed |
| 126 | M & L for preparing surfaces of sunken floor by brooming down or steel wire brushing and cleaning the surface with water and applying a coat of Rendercok HBF water proofing coating as per manufacturer's instructions over slab and sides of sunken complete all as required and as directed by Engineer - in - Charge at site.M/s Fosroc Chemicals or equivalent as approved by GE. |
| 127 | M&L 12 mm thick Toughned glass in repair as in hinged doors, partitions, automatic doors,railing, and similar work including cutting to shape, drilling holes required,and concerned necessary fittings,colour Black, complete all as specified and directed by Engr-in-Charge. |
| 128 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 129 | M&L for Solid PVC Wall Lining(wall Panneling) consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications and drawing |
| 130 | M&L for Non asbestos fibre cement building boards 4 mm thick fixed or laid/ inserted to Aluminium framework with screws fixed in flat or slope ceiling, including aluminium snap grid,complete all as specified and directed. |
| 131 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 132 | M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 133 | M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley, gutter fixed with self tapping screws as specified |
| 134 | Material & Labour in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 135 | S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window,ventilator frame with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed |
| 136 | S&F Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 137 | S&F in repair 32 mm dia Waste coupling of PTMT (half or full threaded)for WHB and Sink . (Minimum weight 32mm- 45gms/40mm-60 gms),complete all as specified |
| 138 | Refixing old steel tubing 15/20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) |
| 139 | Refixing old steel tubing 40 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) |
| 140 | S&F GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two ea\qual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 141 | S&F Exposed metal frame ceiling with calcium silicate board of 6mm of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) |
| 142 | Dismantling of wrought iron or mild steel work as in Truss, Rafter, Purlin, Post Fencing, rail, gusset plates of any description, complete all as specified |
| 143 | Dismantling framed timber scantling 40 sq.cm in filletsm truss, rails, posts, rafter, purlins, etc. under 40 sq.cm in |
| 144 | Dismantling un framed timber scantling 40 sq.cm in filletsm truss, rails, posts, rafter, purlins, etc. under 40 sq.cm in |
| 145 | M & L Mild steel works as in posts and struts, purlin, rafter, truss,circular pipe, square section, flat iron, Nut bolt, gusset plates etc cutting tops to shape as directed, drilling holes all necessary drilling, bolting or riveting, etc, incl embeding in concrete and screwing etc, and similar work conforming to Fe-290 Gde E-165 complete all as spd and directed by Engr-in-Charge. |
| 146 | Schedule of credit amount of Rs 1,26,735.00 to be deducted during AOC Please Enable Macros to View BoQ information SCHEDULE OF CREDIT Station : Jabalpur NAME OF WORK: DAY TO DAY MAINTENANCE AND PETTY REPAIR OF B/R COMPLAINTS, REPAIR TO JOINERY, ROOF AND FALSE CEILING OF AREA -I OF AGE B/R- II UNDER GE (WEST) JABALPUR. Sl No Brief Description A/U Qty Rate Amount Remarks |
| 147 | Item No |
| 148 | 141.0 |
| 149 | 111, 113 |
| 150 | 70, 71 |
| 151 | 127.0 |
| 152 | 130.0 |
| 153 | 115.0 |
| 154 | 116.0 |
| 155 | 117.0 |
| 156 | 117.0 Total Rs. 126735.0 |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysDec 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender