Power Government Departments Closing in 6 days TDR #58478073

Tender For R&M Works To 132/33 Kv Gss Control Room At Palaspanga (Provision For Attached Ladies Rest Room With Toilet & Attched Gents Toilet To Control Room)

Issued by Government Departments · Kendujhar, Odisha
Tender Value
8.41 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
8500
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for R&M Works To 132/33 Kv Gss Control Room At Palaspanga (Provision For Attached Ladies Rest Room With Toilet & Attched Gents Toilet To Control Room)

BOQ

Name of Work:- R&M Works to 132/33 KV GSS Control Room at Palaspanga (Provision for attached Ladies Rest Room with Toilet & Attched Gents Toilet to Control Room)
Sl. No. Item Description
1Dismantling and Removing Brick/Stone Masonry in cement/lime mortar under /above 3mtr height including stacking the useful materials for reuse and removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.
2Earthwork Excavation in Foundation trenches in all kinds of soils with dressing and leveling the bed and sides Suitable to the drawing and design and depositing the excavated soil within initial lead of 50 mtr. and initial lift of 1.5 mtr Including cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
3Filling in Foundation and Plinth with sand well watered and rammed, laid in layers not exceeding 150mm in thickness suitable to drawing and design compacted to required depth etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineering charge.
4Cement Concrete work of proportion (1:4:8) in bed of foundation / basement of floor etc. using 40mm size hard black crusher broken granite stone metal of approved quality and from approved quarry laidd in layers not exceeding 150mm thick compacted to required depth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
5Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Column footing and stem upto plinth using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
6Brick masonry work with cement mortar (1:6) in Foundation and Plinth using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2%and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
7Brick masonry work with cement mortar (1:4) in Foundation and Plinth using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2%and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
8Honey Comb Masonry work using Fly Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with cement mortar (1:4) and plastering with 16mm thick cement plaster (1:6) after immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
9Providing Cement Concrete of grade M-20 (1:1 ½ :3) using 12mm(½\\") size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of shuttering including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
1012mm thick Sand and Cement plaster of proportion (1:4) including neat cement punning finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
1112mm thick Sand and Cement plaster of proportion (1:4) including neat cement punning and two coats of Bitumen painting over top of wall with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
12Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Grade Beam using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
13Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in RCC column & beam using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
14Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Lintel using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
15Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Chhaja using 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
16Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Roof Slab upto plinth using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
17Providing and Making Re-enforcing Grills for RCC works with MS rod,tor-steel of required diameter and binding wires of 18 to 20 gauge with straightening, cutting, bending, binding, tying the grills and placing in position suiting to the form-work for RCC structural member as per the drawing and design at site including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge.(Payment shall be made on weight of MS rod/tor-steel only and no separate payment for binding wires)
18Brick masonry works with cement mortar (1:6) in Super Structure using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2% and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
19Brick masonry works with cement mortar (1:4) in Super Structure using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2% and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
20Providing 2.5cm (25mm) Grading Concrete in cement concrete (1:2:2) using 6mm size hard black crusher broken granite stone chips of approved quality and from approved quarry including batching ,mixing, blending etc for preparing the concrete with lowing, laying, hoisting etc for applying over RCC roof surface to proper grade and slope mixed with water Proofing compound as per necessity, compacted and finished smooth to get required thickness with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
21Providing and Supplying for Cutting Grooves in pucca floor and walls for providing concealed pipe wiring with fittings for water supply line and making good to the damages with CC(1:3:6) using 12 mm size HBG stone chips finished with 12mm CP(1:3) and punning as per necessity etc complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
22Supplying all materials, Labour & T&P for cutting holes through existing brick/ laterite masonry wall of 250 to 500 mm thick for taking C.I./PVC/AC pipes and fittings including mending good to the damages with brick, CC ( 1:2:4) & finishing the same with Cement Plaster (1:3) etc. complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per P.H. specification and direction of the Engineer-in- charge.
23Providing and Supplying for Plumbing & laying Un-plastisized PVC (UPVC) pipe (Confirming to IS-4985 of Class-IV-10 Kg per Sq.Cm) of approved make and quality for internal water supply in house plumbing with the following nominal dia with fittings, clamps etc firmly fixed to walls ,floors and ceiling etc with making good to the damages happened to surfaces etc including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
24(a) UPVC pipe- 20mm dia (Oriplast/Jaiswal/Finolax)
25(b) UPVC pipe- 25mm dia (Oriplast/Jaiswal/Finolax)
2612mm thick Sand and Cement plaster of proportion (1:4) finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
2712mm thick Sand and Cement plaster of proportion (1:6) finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
2816mm thick Sand and Cement plaster of proportion (1:6) finished smooth over rough surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
29Providing Cement Washing one coat with good quality port land cement and water properly mixed, washed and finished over plastered surfaces after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
30Providing Floor Tiling works in floors using Vitrified Tiles of size 600mm X 600mm of approve make & quality conforming to IS: 13755 laid to proper slope over 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
31Providing Floor Tiling works in floors, treads,on steps and landing using Ceramic Tiles of premium grade and standard size of approve make & quality laid over a bed of 25mm thick cement mortar (1:1) and jointed with cement slurry mixed with pigments to match the shade of the tiles, finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
32Providing Wall Tiling works in Dado,Skirting,rises of steps and vertical face of wall using Ceramic Tiles of premium grade and standard size of approve make & quality fixed over 12mm thick cement mortar (1:3) and jointed with cement slurry mixed with pigments to match the shade of the tiles,finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
33Providing Supplying, Fitting, Fixing Stainless steel Grill and Grill Gates etc as per approved design and drawing with as per necessity, fitted with locking arrangements, handles etc, dully fixed at the opening in proper position with clamps well embedded in masonry walls/ RCC members with C.C.(1:1½ :3), finished with 12mm CP(1:3) etc complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
34Providing for Finishing surfaces of walls with Acrylic wall putty (water based) of approved quality and make and finished smooth and even surface to receive painting etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements for scaffolding, staging etc required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
35Providing Primming one coat with primer over plastered surface of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
36Providing Painting two coats with plastic emulsion paint of approved quality, make and shade washed and finished smooth over surfaces of wall and ceiling after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
37Providing for Weather coat two coats of approved quality, make and shade washed and finished smooth over exterior surfaces of wall etc after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
38Supplying fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixing including cost, conveyance, taxes of all materials and cost, conveyance of all labour with T&P, equipment’s and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
39Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost, conveyance, taxes of all materials and cost, conveyance of all labour with T&P, equipment’s and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
40Providing fitting & fixing of wall pannelling made out of Al. Section no. 9835 as horizontal and vertical member placed at spacing 2'-0\\" x 2'-0\\" centre to centre with 3mm thick ACP sheet fitted with favicol including drilling holes in walls, fixing with PVC royal plug and screws, hinges, tower bolts, aldrops etc. required for the work etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
41Supplying and fixing of V-Board False Ceiling System on 24mm flange stitched suspension prelude xl gris system having main Tee 3000mm long X 32mm web height X 24mm wide Tee sections. The main runner is to be fixed with 2mm thick pre-stretched GI wire with Soffit Cleat and GI Rawl plug inserted on the main roof to be fixed at 1200mm C/C.The Last hanger at the end of each main runner should not be greater that 450mm from the adjacent wall. The main Runner will be at the distance of 1200mm C/C. The flush fitting 1200mm X 30mm X 24mm wide Cross Tee Sections, with precesion stub end is to be clicked fit in betweeen the main Tee at a distance of 600mm to make a module of 1200mm X 600mm, another cross Tee with precesion stub stop end of size 600mm X 27mm X 24mm is to be click fitted at 1200 Sections parallel to main Tee at 600mm C/C to make a square grid of 600mm X 600mm, or base frame material click end shouldbe made of old rolled Tee steel components and coated with hot deep Galvanized Tee ( 170 gm/sqm, Zinc layer meeting the requirements of BS 2989.) It should have a capping of material coated with baked polyester. The peri meter trim of size 19mm X 19mm white colour secured at 450mm C/C with provision for accomodating ceiling illumination system etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
42Providing for Illuminating Appliances in false ceiling works with Ceiling mounted 39 Watt LED Pannel fittings of Havels/Syska/ Philips make with necessary electronic, reflector etc, power connection complete for operating/working perfectly duly fitted and fixed with Aluminium false ceiling grid suitable to size including cutting making etc including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
43Suppying all labour and T&P for Wiring to Recess light points with 1.5 sqmm single core copper wire of approved quality, including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
44Providing and Supplying for Construction of Gully Trap Chamber of internal size (0.30mtr X 0.30mtr X 0.30mtr) for Sewerage System including earthwork in excavation in foundation in all kinds of soil, filling with sand , foundation bed concrete (1:4:8) , brick masonry walling of 10 ” thick in cement mortar (1:4), inside surfaces plastered with 12mm thick cement mortar (1:4) and applied with neats cement punning after provision for channeling and benching with cement concrete (1:3:6) for smooth flow of sewage, outside walls plastered with 16mm thick cement plaster (1:6) and covered with RCC Slab with MS rod/tor-steel and binding ware as re-enforcing materials having manhole and its cover etc complete as per specification at the occasion including cost, conveyance, royalty and taxes of all materials and cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the PH Specification and direction of the Engineer-in-charge.
45Providing and Supplying for Construction of Inspection Chamber of internal size (0.75mtr X 0.75mtr X 0.45mtr) for Sewerage System including earthwork in excavation in foundation in all kinds of soil, filling with sand , foundation bed concrete (1:4:8) , brick masonry walling of 10 ” thick in cement mortar (1:4), inside surfaces plastered with 12mm thick cement mortar (1:4) and applied with neats cement punning after provision for channeling and benching with cement concrete (1:3:6) for smooth flow of sewage, outside walls plastered with 16mm thick cement plaster (1:6) and covered with RCC Slab with MS rod/tor-steel and binding ware as re-enforcing materials having manhole and its cover etc complete as per specification at the occasion including cost conveyance royalty and taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
46Providing and Supplying for Construction of Manhole Chamber of internal size (0.91mtr X 0.91mtr X 0.91mtr) for Sewerage System including earthwork in excavation in foundation in all kinds of soil, filling with sand , foundation bed concrete (1:4:8) , brick masonry walling of 10 ” thick in cement mortar (1:4), inside surfaces plastered with 12mm thick cement mortar (1:4) and applied with neats cement punning after provision for channeling and benching with cement concrete (1:3:6) for smooth flow of sewage, outside walls plastered with 16mm thick cement plaster (1:6) and covered with RCC Slab with MS rod/tor-steel and binding ware as re-enforcing materials having manhole and its cover etc complete as per specification at the occasion including cost conveyance royalty and taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
47Providing and Supplying for Construction of Soak Way Pit (Circular type)of internal size (1.22mtr dia &2.60mtr deep) for Sewerage System including earthwork in excavation in foundation in all kinds of soil, brick masonry walling of 10 ” thick in Mud mortar at bottom and top and middle portion with honey-combing walls and inside filled with brick bats, brick Khoa etc and top covered with RCC Slab with MS rod/tor-steel and binding ware as re-enforcing materials etc complete as per specification at the occasion including cost conveyance royalty and taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
48Providing for Laying PVC (SWR) Pipes and Specials in Sewerage System for Soil Waste Pipe of the following diameter for all classes in tranches after earthwork in excavation in all kind of soil, providing padding and bedding with sand and cement concrete (1:4:8) respectively as per specification in the occasion including laying and plumbing the pipes with fittings and specials to walls jointed with approved quality solvent cement by non-heat application method and with nails bobbins and wooden pluge etc as per specification with re-filing of trenches after hunching and benching with cement concrete (1:3:6) etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
49(A) 6” (160mm) dia PVC pipe (SWR) (Oriplast/Jaiswal)
50Providing and Supplying for Fitting and Fixing of Toilet Accessories and Appliances in sanitary use of the following type of Approved make and quality as mentioned provided in proper position dully connected to water supply and sanitary system firmly fixed to walls ,floors and ceiling etc using clamps, brackets, nails, screws, bobins etc as required for plumbing the fittings and specials etc and making good to the damages happened to surfaces including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
51(a) Flat Back Standing Urinal (Parryware/ Bell) with all necessary fittings for perfect functioning
52(b) Europian Style Water Closet (Parryware/ Bell) with all necessary fittings for perfect functioning
53Odisha Pan (Parryware/ Bell) with all necessary fittings for perfect functioning of 23\\"x 17\\"size
54(d) 10 Ltr Capacity PVC Lower Level Cistern (Parryware) with all necessary fittings for perfect functioning
55(c) 22” X 16” Wash Hand Basin (Parryware/ Bell) - with all necessary fittings for perfect functioning
56Mirror Cabinet
57CP Brass Glass Self with glass slab (Plaza/Zigma/Cizor/Corona)- 24” X 5” size
58CP Brass Consealed Stop Cock (Plaza/Zigma/Cizor/Corona )-½ ” size
59CP Brass Angle Cock (Plaza/Zigma/Cizor/Corona )-½ ” size
60CP Brass Short Body Bib Cock (Plaza/Zigma/Cizor/Corona)- ½ ” size
61CP Brass Long Body Bib Cock (Plaza/Zigma/Cizor/Corona)- ½ ” size
62CP Brass Ball Bearing Shower with Arm (Plaza/Zigma/Cizor/Corona )- ½ ” size
63CP Brass Towel Rail ( Plaza/Zigma/Cizor/Corona)- ¾” X 24” size
64C.P. towel ring with fittings
65CP Brass Soap Holder (Plaza/Zigma/Cizor/Corona)
66CP Brass Grating (Plaza/Zigma/Cizor/Corona)- 4” size
67stainless steel cloth hanger
68Providing for plumbing & Laying of PVC (SWR) Pipes and Specials in House plumbing for Rain water disposal/ Vent Pipe of the following diameter for all classes with fittings and specials to walls jointed with approved quality solvent cement by non-heat application method and with nails bobbins and wooden plugs etc as per specification with including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
69(A) 4” (110mm) dia PVC pipe (SWR) (Oriplast/Jaiswal)
70PVC Single (Y) Junction - 4” dia (Oriplast/Jaiswal)
71PVC Double Junction - 4” dia (Oriplast/Jaiswal)
72PVC Plain Bend- 4” dia (Oriplast/Jaiswal)
73PVC Door Bend- 4” dia (Oriplast/Jaiswal)
74PVC Off Set- 4” dia (Oriplast/Jaiswal)
75PVC P-Trap- 4” dia (Oriplast/Jaiswal)
76PVC Tee- 6” dia (Oriplast/Jaiswal)
77PVC Tee- 4” dia (Oriplast/Jaiswal)
78PVC Cowl- 4” dia (Oriplast/Jaiswal)
79Providing and Supplying for Removal and Disposal of surplus earth, debries, garbages etc with mechanical means like transportation by Truck /Tractor with loading and unloading of the materials to a distance up to 5 Kms etc complete including cost of Transportation charges and labour with T&P for collecting, loading, unloading, removal & disposal in all respects as per the direction of the Engineer-In-Charge
80CESS 1% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58478073
AUTHORITY Government Departments
TENDER VALUE 8.41 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Orissa Power Transmission Corporation Limited
Work Description Tender for R&M Works To 132/33 Kv Gss Control Room At Palaspanga (Provision For Attached Ladies Rest Room With Toilet & Attched Gents Toilet To Control Room)
Basic Detail
Tender No OPTCL-CVL-SE - E-06 - 2026-27
Bidding Type Tender
Location
City Kendujhar
State Odisha
Key Dates
Publish Date 11 Nov 2026
Submission Date 25 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 8.41 Lakhs
Tender Fee 4000
EMD 8500
Exemption Available
Document List
78085372-1456-4558-9de4-4e97a219a911.html
BOQ_619771.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf
Tendernotice_4.pdf
Tendernotice_5.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

78085372-1456-4558-9de4-4e97a219a911.html

xls

BOQ_619771.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

pdf

Tendernotice_4.pdf

pdf

Tendernotice_5.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender