Public Administrative Department Trust & NGO Closing in 9 days TDR #58477430

Tender For Dismantling And Reconstruction Of Madapalli, Office, Store Room And Front Side Compound Wall In Arulmigu Muthalamman Thirukoil, Vilampatti, Nilakottai Taluk At Dindigul District.

Issued by Trust & NGO · Dindigul, Tamil Nadu
Tender Value
14.92 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Dismantling And Reconstruction Of Madapalli, Office, Store Room And Front Side Compound Wall In Arulmigu Muthalamman Thirukoil, Vilampatti, Nilakottai Taluk At Dindigul District.

BOQ

Name of Work:- DISMANTLING AND RECONSTRUCTION OF MADAPALLI, OFFICE, STORE ROOM AND FRONT SIDE COMPOUND WALL IN ARULMIGU MUTHALAMMAN THIRUKOIL, VILAMPATTI, NILAKOTTAI TALUK AT DINDIGUL DISTRICT.
Sl. No. Item Description
1Earth work excavation for foundation in all classes odf soils and subsoils and to depth as may be directed except in hard rock, requiring blasting, including final leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth clearing and levelling the site, shoring shuttering baling out water wherever necessary etc., complete complying with standard specification.
2Supplying and filling in foundation in basement with filling sand in layers of 150mm thickness well watered rammed and consolidated compling with relevant standard specification
3Cement concrete 1:5:10 (one cement,Five sand Ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing. dewatering, side shuttering, wherever necessary including curing etc., complete complying with the standard specifications and as directed.
4Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
5For Foundation
6For Super structure
7Random Rubble Masonary in Cement Mortar 1:5 ( one Cement and five crushed stone sand) for foundation and basement including simultaneously pointing above ground level with the same mortar etc., complete
8Upto Basement
9Above Basement
10Brick work in CM 1:5 using country brick of size 8 3/4\\" x 4 1/4\\" x 2 3/4\\" including cost and conveyance of all materials and labour charges and all other incidental charges etc., complet complying with standard specification.
11Up to basement
12For Super structure
13Centering for soffits of RCC slab of plane surface like lintel, beam etc., including strutting 3.0m height using M.S. sheets of size 90 x 60cm and BG 10 stiffener with M.S.Angles of size 25x25x3mm laid over silver oak (CW) joists size 10cm x 6.5 cm( spaced at about 90cm c/c and supported by Casurine propos 10cm to 13cm dia ( spaced of 75cm c/c complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid)
14Centering upto grade beam
15Centering for column
16Centering for beams and slabs for upto 3m
17Supply and fabricating of steel required for all RCC works involved in the schedule including cost of steel ,cost of fabrication,labour charges for cleaning the rods straightening, cutting, bending,tying grills including over lapping to the required length wheenever necessary and placing reinforcement in position as specified in the drawing including cost of binding wire provision for spacer bar cover blocks and all other incidental charges etc., directed by the departmental officers.
18Special ceiling plastering and finishing the exposed surfaces of RCC work such as RCC slabs, sunshades, facia, canopy slab, staircase. Waist slab landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking and providing necessary cement mortar nosing, beading etc., wherever necessary and as directed with the same cement mortar etc., complete
19Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors complying with standard specifications and as directed by the departmental officers.
20Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab, the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required, well beated with wooden beater etc., compete with standard specifications.
21Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
22Providing granolithic floor finishing with plain cement concrete 1:2:4 using 10 to 12mm stone chips 25mm thick including cost and conveyance of all materials and all labour charges required for laying finishing and curing etc., complete
23Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.
24Manufacturing supplying and fixing of steel door with the following specification MS angles of size 40x40x6mm are used for the outer frames and M.S. Angles of size 35x35x6mm for the shutter frames stiffeners with 32x6mm M.S/. Flat is provided at required intervals in the shutter frame. 18 gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mmM.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of singlr leaf and 6nos. of hinges in double leaves shutter to be provided to be provided 6nos. of of holdfasts 120mm in length made of angle section spliced at the ends are welded to thr outer frames of the door. Tower bolts 2 nos. one at the top and the other at the botttom are provided 1 no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door . One rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.Incase of double leaf door M.S. Flat 32x3mm at 1.1kg/m is provided on thr one shutter conceal the gap between the two shutters at an appropriate place in the door. A tie bar is provided at the bottom of the frame to preventtwisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportationnd other incidental charges, etc., complete complying with standard specification and as directed by the departmental officer
25Fabricating, Supplying and fixing in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of ‘Z’ section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion ‘J’ section (F4B) of size 46x25x3mmat 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly. 2 numbers of Steel Offset Pivot hinges of size 3” and one number of handle-Cu.m-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adjustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of length 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 200mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter. An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers. All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete complying with standard specification and as directed by the departmental officer
26Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete complying with standard specifications
27Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
28Dismantling Brick/ Stone masonry in cement mortar including all labour charges and tools required etc., and conveying to low lying area nearby etc., complete
29Dismantling Wooden doors and windows including all labour charges and tools required etc., and conveying to specified area nearby etc., complete.
30GST 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58477430
AUTHORITY Trust & NGO
TENDER VALUE 14.92 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Hindu Religious And Charitable Endowments Department
Work Description Tender for Dismantling And Reconstruction Of Madapalli, Office, Store Room And Front Side Compound Wall In Arulmigu Muthalamman Thirukoil, Vilampatti, Nilakottai Taluk At Dindigul District.
Basic Detail
Tender No 02/2026
Bidding Type Tender
Location
City Dindigul
State Tamil Nadu
Key Dates
Publish Date 11 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 14.92 Lakhs
Tender Fee Ref. Documents
EMD 15000
Exemption Available
Document List
BOQ_870005.xls
eba91679-8d8d-41eb-ae7c-4347c60ef2a9.html
Tendernotice_1.pdf
VilampattyMadappalli.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_870005.xls

html

eba91679-8d8d-41eb-ae7c-4347c60ef2a9.html

pdf

Tendernotice_1.pdf

pdf

VilampattyMadappalli.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender