Tender For Special Repair Works To Tower Block-1 At Central Prison Vellore In Vellore District Under Maintenance Of Prison Buildings And Staff Quarters For The Year 2026-2027.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
36500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Works To Tower Block-1 At Central Prison Vellore In Vellore District Under Maintenance Of Prison Buildings And Staff Quarters For The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | DW-B/S-CMW-U3) Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Brick / Stone Masonry in cement mortar walls under 3m high including all tools and plants required etc. all complete as per relevant standard specifications and as directed by the departmental officers. |
| 2 | DM-FL-TI-CM) Dismantling the Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs |
| 3 | DM-R-PT-OC) Removing of One Course of Pressed Tile Roof finish in cement mortar including all tools and plants required etc. all complete as per relevant standard specifications and as directed by the departmental officers. |
| 4 | Clean removal of lime plaster from walls and racking out joints 20mm deep or from terraced roofs racking out joints 12mm deep |
| 5 | EW-AS-NC-IR) Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting, and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150mm thick layers (Including Refilling)EW-AS-NC-IR-2m)a) 0 to 2m depth. |
| 6 | EW-AS-Dr-ER) Earth work excavation for Open Foundation for drains in all soils and subsoils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary. (Excluding refilling the sides of foundation) and depositing the earth in places shown clearing and leveling the site with an initial lead of 10 metres and lift as specified hereunder etc., complete in all respects complying with relevant standard specification (Excluding Refilling) (Drain having bed width upto 1.25 metre).EW-AS-Dr-ER-2m)a) 0 to 2m depth. |
| 7 | CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. |
| 8 | CN-FB-PCC-1:2:4) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly excluding shuttering and centering but including laying, curing and finishing with relevant standard specifications in foundation and basement, and other similar works & as directed by the departmental officers. |
| 9 | BW-FB-KB-CM 1:5) Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete with relevant standard specifications. |
| 10 | BW-MW-KB-CM 1:6) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure in the following floors including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings.BW-SS-KB-CM 1:6-(GF)b. In Stilt / Ground Floor |
| 11 | BW-PW 110mm-KB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Kiln burnt country bricks of size 8¾”x4¼x2¾” (22x11x7cm) including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings.BW-PW 110mm - FB-KB-CM 1:4) a. In Foundation and basement |
| 12 | PL-FL-CM 1:4-20mm) Plastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including surface rendered smooth including providing proper slopes, thread lining, curing and 150mm wide skirting alround with the same cement mortar etc., complete in all respects. |
| 13 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., complete in all respects and complying with relevant standard specifications. |
| 14 | PL-IN-CM 1:4-12mm) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing, scaffolding etc., complete in all respects and complying with standard specifications. |
| 15 | CN-F&S-RCC-M20) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cum) 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum) 5156 Kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670Kg of crushed stone sand (for making 10 cum) but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc., CN-FB-RCC-M20)a. In Foundation and basement |
| 16 | TL-WL-GZT-CM 1:2) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), including curing, finishing etc., all complete and as directed by the departmental officers. (The brand quality of tiles should be got approved from Executive Engineer before use) |
| 17 | TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc., all complete and as directed by the departmental officers. (The brand quality of tiles should be got approved from Executive Engineer before use). |
| 18 | CN-F&S-PCS-M20-20/40) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M20 for the following thickness excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position complying with relevant standard specifications etc., complete in the following floors (Measurement will be taken including bearing in wall also)CN-F&S-PCS-M20-40) II. 40mm thickCN-FB-PCS-M20-40)a. In Foundation & basement |
| 19 | RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying etc., all complete and as directed by the departmental officers. |
| 20 | TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., as per standard specifications. (The quality of tiles shall be got approved from the Executive Engineer before use) |
| 21 | Pointing the existing pressed tile over the roof with Cement Mortar 1:3 (One of Cement and Three of crushed stone sand) mixed with water proofing compound at 2% by weight of cement used including cost of all materials and labour charges for pointing, curing etc., complete and as directed by the departmental officers. |
| 22 | CN-FPS-1:3:6-50mm) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) with secondary reinforcement fibre of approved quality at 0.25% by weight of cement (125gm of fibre for 1 bag i.e., 50Kg of cement) used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the departmental officers. (The shape of slab and brand and quality of fibre should be got approved from the Executive Engineer before use) |
| 23 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., fixing on wall to the proper gradient and alignment and redoing the chipped of masonry etc., as directed by the departmental officers.WS-EX-ASTM-32 PVC)a) 32mm dia |
| 24 | WS-EX-ASTM-25 PVC)b) 25mm dia |
| 25 | WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe with relevant specials such as gratings, shoes, bends, offsets conforming to IS 14735 including jointing with seal ring conforming IS 5382 with leaving a gap about 10mm to allow thermal expansion with necessary clamps, teak wood plugs, etc., of approved quality and including fixing C.I. gratings at the junction of parapet and floor or roof slab etc., including finishing etc., complete complying with relevant standard specifications. (The quality and brand of fittings should be got approved from Executive Engineer before use).WS-EX-RWD-PVC 110) b. 110mm dia PVC SWR pipe |
| 26 | WS-IN-HCP-LBT) Supplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use). |
| 27 | WS-IN-HCP-SBT) Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use). |
| 28 | SA-Ex-SWR P-Dia) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary UPVC special clamps, wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the departmental officers.SA-Ex-SWR P-110)a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 29 | SA-Ex-SWR P-75)b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 30 | SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety and tested with water, including necessary earth work excavation for trenches and refilling the same, well rammed and consolidated after the pipes are jointed and laid to proper gradiant to the alignment as directed by the departmental officers. (SN8 SDR 34 (S16.5), as per IS 15328/2003, should be got approved by the EE/SE/CE before use in works)SA-Ex-SN8-110)a. 110 mm UPVC Non Pressure pipe |
| 31 | SA-Ex-SN8-160)b. 160 mm UPVC Non Pressure pipe |
| 32 | Supply and delivery fabrication of MS doors with out frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including locking arrangements, one coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. |
| 33 | Painting the old Iron work and other similar works such as PVC/ASTM Pipes, Kerb Stone and grills with one coat of approved first class synthetic enamel ready mixed paint of approved quality and brand over the through scrapped surface including scrapping the existing surface the paint should be supplied by the contractor at his own cost, (The quality and the brand of paint should be got approved by the Executive Engineer before use) complying with relevant standard specifications. |
| 34 | Painting the old wood work with one coat of approved Ist class synthetic enamel paint including thorough scrapping the old paint using sand paper as required by the departmental officers including cost of material, labour for painting, supplying etc., all complete as directed by the departmental officers. (the paint quality and shade should be got approved by Executive Engineer before using.) |
| 35 | PA-Ex-IW-2C EP) Painting the new Iron work and other similar works such as PVC / ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost. (The quality and the brand of paint should be got approved by the Executive Engineer before use) complying with relevant Standard specifications. |
| 36 | PA-CE-WW-SL 2C) White washing Two coat using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., complete in all respects. |
| 37 | PA-IN-PEP-2C BPC) Painting the false ceilling / New walls with two coats of 1st class ready mixed PLASTIC EMULSION PAINT of best approved quality colour and shade including a priming coat over cement plastered surface including clean removal of dirt and dust etc., complete including cost of necessary brushes, labour charges, putty etc., complying with relevant standard specification. (The paint should be supplied by the contractors at his own cost.The quality and shade of the paint should be got approved from the Executive Engineer before use.) |
| 38 | PA-Ex-EEP-2C BPC) Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade in addition to one coat of approved primer paint over cement plastered wall surfaces including cost of Exterior Emulsion paint, putty, brushes, etc., all complete as directed by the departmental officers (Paints and its shade should be got approved from the Executive Engineer before using) |
| 39 | Applying two coats of weather coat painting over the terrace floor (including testing) Terrace water proofing work: The existing pressed tiles surface to cleaning water wash using with wire brush, the tiles joints are rack out using machine without damaging the existing structure and clean the joint. Fosroc chemical, Nito bond SBR add with water ratio of 1:1 apply in the joints then Nito bond SBR add with Cement, sand, water and red oxide for the ratio of 1:1:1:1/2 after fosroc brand of equalent chemical roof guard add with water for the ratio of 4:1 applying top of surfaces. After 24 hours another second coat applying, the all process completed water stagnant of 48 hours for treated place any damages to ensure slab to all complete and as directed by the departmental officers. |
| 40 | Plastering with C.M. 1:5, 12 to 50mm thick mixed with Nitobond SBR (Polymer bonding agent) over the coated surface including providing band cornice, ceiling cornice, curing, scaffolding etc., all complete and as directed by the departmental officers. |
| 41 | EL-IN-OEP-OLP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring)EL-IN-OEP-WCRa. Light point with ceiling rose |
| 42 | EL-IN-OEP-FP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for FAN POINT controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 43 | EL-IN-OWR-2x2.5m²) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. [Open wrining] |
| 44 | Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm/4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm/32mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. [Open wrining] |
| 45 | Supply and fixing of 4 way Vertical Triple pole and heutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only etc., all complete. |
| 46 | EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with dimmer electronic regulator suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/2019 and provided with insulation . (The brand should be got approved from the Executive Engineer before supply made).EL-IN-EF-48\\") a) 48\\" Electric fan 1200mm sweep |
| 47 | EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan) |
| 48 | EL-IN-EF-BH) Supplying and fixing of water tight Bulk head fitting suitable for LED with guard, including ncessary connections, cost of materials etc., all complete and as directed by the departmental officers (the quality of the bulk head fittings should be got approved from the executive engineer before use) |
| 49 | EL-IN-LED.F-LB) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use)EL-IN-EF-12W)b) 12 watts LED bulb |
| 50 | EL-EX-EF-SL) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) lower end lamp with heavy gauge aluminium sheet fabricated canopy treated primered and painted with stove enameled CRCA sheet steel contact gear cum reflector tray duly finished glossy white for optimum reflection with clear ribbed acrylic bowl fixed to aluminium frame with gasket lining secured to canopy by means of hinges for one side and foggle - catches in the other side for minimum projection against dust and water entry all prewired upto terminal block complete with all accessories such as copper wire, LED, bulb etc., complete using 25mm dia GI 'B' class pipe for 1.50m length, confirming to ISI specifications and including labour charges for fixing street light fittings in EB pole / wall etc., complete as directed by the departmental officers. (The quality and brand of entire fitting should be got approved from Executive Engineer before use).EL-EX-EF-SL-25W)25W LED Street Light Fitting with LED |
| 51 | EL-IN-LED.F-TL) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials twin core flex wire, TW round block and labour charges for fixing in position etc., all complete and as directed by the departmental officers (The material should be got approved from the Executive Engineer before use). |
| 52 | EL-IN-EF-TWP) Supplying and fixing of 1 no of following thick TW plank varnished with 1 no of 25 amps 250 volts fuse unit and 1 no copper earth plate of suitable size bolts and nuts on wall for EB service connections including cost of all materials etc., all complete (Single phase service connection)EL-IN-EF-TW P-450x300x20) b) 1 no of 450x300x20mm thick TW plank |
| 53 | EL-IN-EF-TPN) Supply and fixing of following Triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection,cost of all materials etc., all complete as directed by the departmental officers. (The quality should be got approved by the Executive Engineer before use).EL-IN-EF-TPN-63a) b) 63 amps triple pole main switch with fuse and neutral link |
| 54 | EL-IN-EF-FU) Supplying and fixing following porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials etc., all complete.EL-IN-EF-3-63aFU) b) 3 nos of 63 amps 500 volts grade porcelain fuse unit |
| 55 | EL-IN-EF-8 SWG) Supplying and laying of 8SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc. including cost of all materials etc.. all complete. |
| 56 | EL-IN-EF-TNBP) Providing Earthing station using 2.0m of 40mm dia B class G.I pipe electrode as per PWD (TNBP) and supplying and laying of 8 SWG GI wire including earth work excavation, brick work excavation , brick work in cement mortar, plastering, RCC cover slab, G.I wire 0.50 Kg, 20 Kg of charcoal, 9Kg of salt, copper plate (60cmx60cmx3mm) of weight 10.5 Kg including cost of all materials etc. all complete and as directed by the departmental officers. |
| 57 | Supply and fixing of 40 mm dia GI pipe B class for EB service connection (Three Phase) for passing through from top of house to the EB board etc., all complete and as directed by the departmental officers. |
| 58 | Run off 4 wires of 4 Sq.min PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, with one run of 7/20G1 stay wire suspended with porecelin reel insulators at 1.0m centre to centre for support of phase and neutral cable from top of street pole to the house/flats including all materials etc., all complete for EB service connections including labour charges for fixing Gl wire and MS Angles (for EB service connection three phase) |
| 59 | Supply and fixing of fan down rod 4 feet long for the new ceiling fan including cost of materials etc, all complete and as directed by the departmental officers. |
| 60 | Supply and fabrication of ISMB 250 x 125 x 6.9mm thick and ISMC 175 x 75 x 5.7mm thick. The rate is including transportation and one coat of red oxide primer etc.. all complete and as directed by the departmental officers.a) ISMB 250x125x6.9 mm |
| 61 | b) ISMC 175x75x5.7 mm |
| 62 | Supply and fabrication of Base plate and bolt nut 400x400x16mm. The rate is including transportation and one coat of red oxide primer etc.. all complete and as directed by the departmental officers. |
| 63 | Labour charges for fixing of ISMB and ISMC sections. The rate shall be paid in weight (Kg) basis which shall include anelfor fastner, bolt nut, washer, packing plate, base plate etc,. all complete and as directed by the departmental officers. |
| 64 | FW-SS-AHS-2leg) Providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length (3m height + 0.50m projection + 0.50m into the ground ) the distance between the two rows being 1.25 m and the spacing of posts being 2m in both rows with two horizontal posts with 0.5m overlap on either side and braces at 2mc/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1 m width etc., all complete firm using coir and nails 1m run.FW-SS-AHS-5.5m) b) 5.50 m height in addition of 2.5m ht |
| 65 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below with all cross bracings using mild steel sheets of size 90cm x 60cm and MS 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak or country wood joists of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia spaced at 75cm intervals and removing the same after a specified period without damaging the R.C.C works etc., complete complying with standard specifaction and as directed by the departmental officers.FW-SS-WS-PS) b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender